Date: Wed, 27 Jun 2001 23:09:16 -0400 (EDT) From: Florent Parent <Florent.Parent@viagenie.qc.ca> To: <freebsd-mobile@FreeBSD.ORG> Subject: Lucent / Linksys WDT11 (PLX PCI9052): almost working Message-ID: <Pine.BSF.4.33.0106272302460.1066-100000@blues.viagenie.qc.ca>
next in thread | raw e-mail | index | archive | help
After reading the thread on "PLX PCI9052", I tried getting my Lucent Orinoco silver card running on a desktop using the Linksys WDT11 PCI card, which uses a PLX PCI9052 chip. I added the vendor/deviceid values in if_wi.c, and the card is detected and installed as a wi device. wi0: <ORINOCO PCI WaveLAN/IEEE 802.11> port 0xd800-0xd83f,0xd400-0xd47f mem 0xeb100000-0xeb1003ff irq 11 at device 8.0 on pci0 The wireless card is up and running. I can communicate in ad-hoc mode with another wireless node (laptop using a Cisco 350 card). So far so good. The problem is that after some 15 minutes or so, I get a watchdog timeout and other error messages from the wi driver. wi0: watchdog timeout wi0: init failed wi0: timeout in wi_seek to fce0/0; last status 8021 wi0: timeout in wi_seek to fc07/0; last status 8021 wi0: timeout in wi_seek to fc81/0; last status 8021 wi0: timeout in wi_seek to fc00/0; last status 8021 wi0: failed to allocate 1594 bytes on NIC wi0: tx buffer allocation failed wi0: failed to allocate 1594 bytes on NIC wi0: mgmt. buffer allocation failed wi0: timeout in wi_seek to 0/0; last status 8021 wi0: timeout in wi_seek to 0/44; last status 8021 wi0: xmit failed wi0: watchdog timeout wi0: init failed Any clues ? Running FreeBSD-current from around June 24th. -- Florent Parent Viagénie inc. http://www.viagenie.qc.ca +1.418.656.9254 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.33.0106272302460.1066-100000>