Date: Sun, 17 Jan 1999 00:49:57 +0100 From: Gianmarco Giovannelli <gmarco@giovannelli.it> To: current@FreeBSD.ORG Cc: scsi@FreeBSD.ORG Subject: Problem booting from aic7890/91 Ultra2 SCSI Message-ID: <4.1.19990117003737.009d4a80@194.184.65.4>
next in thread | raw e-mail | index | archive | help
Ok, first the conclusion...
I am not able to boot anymore from a 3.0-current system while I can boot
quite nicely from the 3.0-RELEASE generic kernel.
The system hangs on checking the scsi chain and remains stopped here. The
last thing I can see on the screen is the :
Waiting 3 seconds for SCSI devices to settle
And nothing else happens anymore. So I have to hard reset the box.
here is a dmesg from the 3.0-RELEASE generic kernel.
### dmesg of 3.0-RELEASE generic kernel ###
Copyright (c) 1992-1998 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.0-RELEASE #0: Sat Oct 17 17:45:06 GMT 1998
jkh@kickme.freebsd.org:/usr/src/sys/compile/GENERIC
Timecounter "i8254" frequency 1193182 Hz cost 3038 ns
CPU: Pentium II (quarter-micron) (400.91-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x651 Stepping=1
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,
PAT,PSE36,MMX,<b24>>
real memory = 134217728 (131072K bytes)
avail memory = 127537152 (124548K bytes)
Preloaded a.out kernel "kernel.GENERIC" at 0x0xf02ed000.
Probing for devices on PCI bus 0:
chip0: <Intel 82443BX host to PCI bridge> rev 0x02 on pci0.0.0
chip1: <Intel 82443BX host to AGP bridge> rev 0x02 on pci0.1.0
chip2: <Intel 82371AB PCI to ISA bridge> rev 0x02 on pci0.4.0
ide_pci0: <Intel PIIX4 Bus-master IDE controller> rev 0x01 on pci0.4.1
chip3: <Intel 82371AB USB host controller> rev 0x01 int d irq 255 on pci0.4.2
chip4: <Intel 82371AB Power management controller> rev 0x02 on pci0.4.3
ahc0: <Adaptec aic7890/91 Ultra2 SCSI adapter> rev 0x00 int a irq 14 on
pci0.6.0
ahc0: aic7890/91 Wide Channel A, SCSI Id=7, 16/255 SCBs
de0: <Digital 21041 Ethernet> rev 0x11 int a irq 14 on pci0.9.0
de0: 21041 [10Mb/s] pass 1.1
de0: address 00:40:05:36:7a:72
Probing for devices on PCI bus 1:
vga0: <Matrox model 0521 graphics accelerator> rev 0x01 int a irq 11 on
pci1.0.0
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 not found at 0x280
fe0 not found at 0x300
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
psm0 at 0x60-0x64 irq 12 on motherboard
psm0: model Generic PS/2 mouse, device ID 0
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 not found at 0x1f0
wdc1 not found at 0x170
wt0 not found at 0x300
mcd0 not found at 0x300
matcdc0 not found at 0x230
scd0 not found at 0x230
ie0: unknown board_id: f000
ie0 not found at 0x300
ep0 not found at 0x300
ex0 not found
le0 not found at 0x300
lnc0 not found at 0x280
ze0 not found at 0x300
zp0 not found at 0x300
cs0 not found at 0x300
adv0 not found at 0x330
bt0 not found at 0x134
aha0 not found at 0x134
npx0 on motherboard
npx0: INT 16 interface
de0: enabling 10baseT port
Waiting 15 seconds for SCSI devices to settle
sa0 at ahc0 bus 0 target 6 lun 0
sa0: <TANDBERG TDC 3500 =01:> Removable Sequential Access SCSI2 device
sa0: 3.300MB/s transfers
da0 at ahc0 bus 0 target 0 lun 0
da0: <QUANTUM XP39100W LYK8> Fixed Direct Access SCSI2 device
da0: 40.0MB/s transfers (20.0MHz, offset 31, 16bit), Tagged Queueing Enabled
da0: 8682MB (17781520 512 byte sectors: 255H 63S/T 1106C)
changing root device to da0s1a
da1 at ahc0 bus 0 target 1 lun 0
da1: <Quantum VP32170 89TC> Fixed Direct Access SCSI2 device
da1: 20.0MB/s transfers (10.0MHz, offset 15, 16bit), Tagged Queueing Enabled
da1: 2069MB (4238640 512 byte sectors: 255H 63S/T 263C)
da2 at ahc0 bus 0 target 2 lun 0
da2: <IOMEGA ZIP 100 E.08> Removable Direct Access SCSI2 device
da2: 3.300MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
### End dmesg ###
My kernel is :
### Begin kernel ###
machine "i386"
cpu "I686_CPU"
ident GMARCO
maxusers 32
options INET #InterNETworking
options FFS #Berkeley Fast Filesystem
options NFS #Network Filesystem
options PROCFS #Process filesystem
options FFS_ROOT
options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!]
options SCSI_DELAY=3000 #Be pessimistic about Joe SCSI device
options UCONSOLE #Allow users to grab the console
options USERCONFIG #boot -c editor
options VISUAL_USERCONFIG #visual boot -c editor
options SYSVSHM
options SYSVSEM
options SYSVMSG
config kernel root on da0
controller isa0
controller pci0
controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr
disk fd0 at fdc0 drive 0
controller ahc0
controller scbus0
device da0
device sa0
device cd0
controller atkbdc0 at isa? port IO_KBD tty
device atkbd0 at isa? tty irq 1
device psm0 at isa? tty irq 12
device vga0 at isa? port ? conflicts
device sc0 at isa? tty
pseudo-device splash
device npx0 at isa? port "IO_NPX" irq 13 vector npxintr
device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr
device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr
device lpt0 at isa? port? tty irq 7 vector lptintr
device de0
device apm0 at isa? flags 0x31 # Advanced Power Management
controller pnp0
#Luigi's drivers
device pcm0 at isa? port 0x220 tty irq ? drq ? flags 0x15 vector
pcmintr
controller smbus0
controller iicbus0
controller iicbb0
device bktr0
pseudo-device loop
pseudo-device ether
pseudo-device sl 1
pseudo-device tun 1
pseudo-device pty 16
pseudo-device gzip
### End kernel ###
I have also a cdrom installed on id #5 , but it is not listed in the
GENERIC kernel's dmesg, because with -CURRENT it logs some error about
timeout, so I decided to put out of the chain. But the hans problem is
still here also without cdrom.
The mainboard is an asus P2B-S with scsi onboard (bios 2.01).
I use the bios default fro the controller...
Please answer...
Best Regards,
Gianmarco Giovannelli (http://www.giovannelli.it/~gmarco)
"Unix expert since yesterday"
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4.1.19990117003737.009d4a80>