Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 19 Feb 1999 00:15:13 -0800
From:      Charlie Root <drews@UCSD.Edu>
To:        freebsd-questions@FreeBSD.ORG
Subject:   Kernel Compile Failure
Message-ID:  <36CD1D90.898AAD18@ucsd.edu>

next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
--------------05ECE6E8A5D83C41742D50BA
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Here is my kernel configuration file that causes an ERROR code 1 stop
when i run make from /usr/src/sys/compile/DREW



Any suggestions greatly appreciated. I am trying to set up IP
masquerading with this machine.

--------------05ECE6E8A5D83C41742D50BA
Content-Type: text/plain; charset=us-ascii;
 name="DREW"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="DREW"

#
# CX166100 Custom Kernel for cx166100-a ip masquerading
#
# For more information read the handbook part System Administration -> 
# Configuring the FreeBSD Kernel -> The Configuration File. 
# The handbook is available in /usr/share/doc/handbook or online as
# latest version from the FreeBSD World Wide Web server 
# <URL:http://www.FreeBSD.ORG/>;
#
# An exhaustive list of options and more detailed explanations of the 
# device lines is present in the ./LINT configuration file. If you are 
# in doubt as to the purpose or necessity of a line, check first in LINT.
#
#	$Id: CX166100,v 1.143.2.2.1 1999/02/18 22:11:07 des Exp $

machine		"i386"
cpu		"I686_CPU"
ident		DREW
maxusers	32

#options		MATH_EMULATE		#Support for x87 emulation
options		INET			#InterNETworking
options		FFS			#Berkeley Fast Filesystem
options		FFS_ROOT		#FFS usable as root device [keep this!]
options		MFS			#Memory Filesystem
options		MFS_ROOT		#MFS usable as root device, "MFS" req'ed
options		NFS			#Network Filesystem
#options		NFS_ROOT		#NFS usable as root device, "NFS" req'ed
#options		MSDOSFS			#MSDOS Filesystem
options		"CD9660"		#ISO 9660 Filesystem
#options		"CD9660_ROOT"		#CD-ROM usable as root. "CD9660" req'ed
options		PROCFS			#Process filesystem
options		"COMPAT_43"		#Compatible with BSD 4.3 [KEEP THIS!]
#options		SCSI_DELAY=15000	#Be pessimistic about Joe SCSI device
options		UCONSOLE		#Allow users to grab the console
options		FAILSAFE		#Be conservative
#options		EXT2FS			# Allow mounting Linux file systems
options		USERCONFIG		#boot -c editor
options		VISUAL_USERCONFIG	#visual boot -c editor
options		IPFIREWALL
options		IPDIVERT

config		kernel	root on wd0

# To make an SMP kernel, the next two are needed
#options	SMP			# Symmetric MultiProcessor Kernel
#options	APIC_IO			# Symmetric (APIC) I/O
# Optionally these may need tweaked, (defaults shown):
#options	NCPU=2			# number of CPUs
#options	NBUS=4			# number of busses
#options	NAPIC=1			# number of IO APICs
#options	NINTR=24		# number of INTs

controller	isa0
controller	eisa0
controller	pci0

# Sound Support
controller	snd0
device		sb0 at isa? port 0x220 irq 7 conflicts drq 1 vector sbintr
device		sbxvi0 at isa? drq 5
device		sbmidi0 at isa? port 0x330
device		op10 at isa? port 0x388 conflicts

controller	fdc0	at isa? port "IO_FD1" bio irq 6 drq 2
disk		fd0	at fdc0 drive 0
disk		fd1	at fdc0 drive 1

options		"CMD640"	# work around CMD640 chip deficiency
controller	wdc0	at isa? port "IO_WD1" bio irq 14
disk		wd0	at wdc0 drive 0
disk		wd1	at wdc0 drive 1

controller	wdc1	at isa? port "IO_WD2" bio irq 15
disk		wd2	at wdc1 drive 0
disk		wd3	at wdc1 drive 1

options		ATAPI		#Enable ATAPI support for IDE bus
options		ATAPI_STATIC	#Don't do it as an LKM
device		acd0		#IDE CD-ROM
device		wfd0		#IDE Floppy (e.g. LS-120)

# A single entry for any of these controllers (ncr, ahb, ahc) is
# sufficient for any number of installed devices.
controller	ncr0
controller	ahb0
controller	ahc0
controller	isp0

# This controller offers a number of configuration options, too many to
# document here  - see the LINT file in this directory and look up the
# dpt0 entry there for much fuller documentation on this.
controller      dpt0

controller	adv0	at isa? port ? cam irq ?
controller	adw0
controller	bt0	at isa? port ? cam irq ?
controller	aha0	at isa? port ? cam irq ?
#controller	aic0	at isa? port 0x340 bio irq 11

controller	scbus0

device		da0

device		sa0

device		pass0

device		cd0	#Only need one of these, the code dynamically grows

#device		wt0	at isa? port 0x300 bio irq 5 drq 1
#device		mcd0	at isa? port 0x300 bio irq 10

#controller	matcd0	at isa? port 0x230 bio

#device		scd0	at isa? port 0x230 bio

# atkbdc0 controlls both the keyboard and the PS/2 mouse
controller	atkbdc0	at isa? port IO_KBD tty

device		atkbd0	at isa? tty irq 1
device		psm0	at isa? tty irq 12

device		vga0	at isa? port ? conflicts

# splash screen/screen saver
pseudo-device	splash

# syscons is the default console driver, resembling an SCO console
device		sc0	at isa? tty
# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
#device		vt0	at isa? tty
options		XSERVER			# support for X server
#options		FAT_CURSOR		# start with block cursor
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines
#options		PCVT_SCANSET=2		# IBM keyboards are non-std

device		npx0	at isa? port IO_NPX irq 13

#
# Laptop support (see LINT for more options)
#
device		apm0    at isa?	disable	flags 0x31 # Advanced Power Management

# PCCARD (PCMCIA) support
#controller	card0
#device		pcic0	at card?
#device		pcic1	at card?

device		sio0	at isa? port "IO_COM1" flags 0x10 tty irq 4
device		sio1	at isa? port "IO_COM2" tty irq 3
device		sio2	at isa? disable port "IO_COM3" tty irq 5
device		sio3	at isa? disable port "IO_COM4" tty irq 9

# Parallel port
device		ppc0	at isa? port? net irq 7
controller	ppbus0
device		nlpt0	at ppbus?
device		plip0	at ppbus?
device		ppi0	at ppbus?
#controller	vpo0	at ppbus?

# Order is important here due to intrusive probes, do *not* alphabetize
# this list of network interfaces until the probes have been fixed.
# Right now it appears that the ie0 must be probed before ep0. See
# revision 1.20 of this file.
#device ax0
device de0
#device fxp0
#device mx0
#device pn0
#device rl0
#device tl0
#device tx0
#device vr0
#device vx0
#device wb0
#device xl0

device ed0 at isa? port 0x280 net irq 10 iomem 0xd8000
#device ie0 at isa? port 0x300 net irq 10 iomem 0xd0000
#device ep0 at isa? port 0x300 net irq 10
#device ex0 at isa? port? net irq?
#device fe0 at isa? port 0x300 net irq ?
device le0 at isa? port 0x300 net irq 5 iomem 0xd0000
#device lnc0 at isa? port 0x280 net irq 10 drq 0
#device ze0 at isa? port 0x300 net irq 10 iomem 0xd8000
#device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000
#device cs0 at isa? port 0x300 net irq ?

pseudo-device	loop
pseudo-device	ether
#pseudo-device	sl	1
#pseudo-device	ppp	1
pseudo-device	tun	1
pseudo-device	pty	16
pseudo-device	gzip		# Exec gzipped a.out's
pseudo-device	speaker		# IBM BASIC-style noises through PC speaker

# KTRACE enables the system-call tracing facility ktrace(2).
# This adds 4 KB bloat to your kernel, and slightly increases
# the costs of each syscall.
options		KTRACE		#kernel tracing

# This provides support for System V shared memory and message queues.
#
options		SYSVSHM
options		SYSVMSG

#  The `bpfilter' pseudo-device enables the Berkeley Packet Filter.  Be
#  aware of the legal and administrative consequences of enabling this
#  option.  The number of devices determines the maximum number of
#  simultaneous BPF clients programs runnable.
pseudo-device	bpfilter 2	#Berkeley packet filter


# USB support
#controller    uhci0
#controller    ohci0
#controller    usb0
#
# for the moment we have to specify the priorities of the device
# drivers explicitly by the ordering in the list below. This will
# be changed in the future.
#
#device        ums0
#device        ukbd0
#device        ulpt0
#device        uhub0
#device        ucom0
#device        umodem0
#device        hid0
#device        ugen0

#
#options       USB_DEBUG
#options       USBVERBOSE

--------------05ECE6E8A5D83C41742D50BA--



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?36CD1D90.898AAD18>