Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 22 Dec 2004 11:23:24 -0600
From:      <Clay_Cooper@Dell.com>
To:        <martinh@solid-state-logic.com>
Cc:        freebsd-questions@freebsd.org
Subject:   RE: Support for PERC4e/Di and 4e/Si
Message-ID:  <D74A58FD0DC39745ABA340E4EB98BDB007ADCD@ausx2kmps304.aus.amer.dell.com>

next in thread | raw e-mail | index | archive | help
Martin and all,
Thanks for your help.  I found a patch in the freebsd-stable mailing
list archive that adds the PCI-IDs to amr_pci.c.  For some reason the
patch would not apply correctly to my 4.10-stable-20040818-jpsnap
source, but I was able to make the changes manually and compile a new
kernel.  The new kernel recognized the PERC4e/Di and PERC4e/Si, and the
amr driver loaded and worked with the newer PERCs.  For everyone's
reference, here is the patch as copied from the mailing list:

--- 4.10-rel/amr_pci.c  Wed Oct 27 18:15:12 2004
+++ amr_pci.c   Wed Oct 27 18:15:12 2004
@@ -128,6 +128,7 @@
      {0x1000, 0x1960, PROBE_SIGNATURE},
      {0x1000, 0x0407, 0},
      {0x1028, 0x000e, PROBE_SIGNATURE}, /* perc4/di i960 */
+    {0x1028, 0x0013, 0}, /* perc4e/Si */
      {0x1028, 0x000f, 0}, /* perc4/di Verde*/
      {0, 0, 0}
  };
@@ -180,7 +181,8 @@
       */
      command =3D pci_read_config(dev, PCIR_COMMAND, 1);
      if ((pci_get_device(dev) =3D=3D 0x1960) || (pci_get_device(dev) =
=3D=3D=20
0x0407) ||
-       (pci_get_device(dev) =3D=3D 0x000e) || (pci_get_device(dev) =
=3D=3D=20
0x000f)) {
+       (pci_get_device(dev) =3D=3D 0x000e) || (pci_get_device(dev) =
=3D=3D=20
0x000f) ||
+       (pci_get_device(dev) =3D=3D 0x0013)) {
         /*
          * Make sure we are going to be able to talk to this board.
          */=20


Clay Cooper, RHCE
PG Custom Solutions Engineering
Clay_Cooper@Dell.com
512.723.5951


-----Original Message-----
From: Martin Hepworth [mailto:martinh@solid-state-logic.com]=20
Sent: Thursday, December 16, 2004 3:05 AM
To: Cooper, Clay
Cc: freebsd-questions@freebsd.org
Subject: Re: Support for PERC4e/Di and 4e/Si

Clay

have you tried booting from the first CD. I think the floppy based
kernel is cut down a little to save space, so it may not have the
required driver on it.

If you can't boot from the CD (like bios won't support it), you'll have
to build you own floppy images with the perc 4e driver in that kernel.=20
See the hnadbook for how to do this..

--
Martin Hepworth
Snr Systems Administrator
Solid State Logic
Tel: +44 (0)1865 842300


Clay_Cooper@Dell.com wrote:
> Greetings,
>=20
> The amr driver man page @
> =
http://www.freebsd.org/cgi/man.cgi?query=3Damr&apropos=3D0&sektion=3D4&ma=
npa
> th
> =3DFreeBSD+4.10-stable&format=3Dhtml
> Claims support for PERC4e/Di and Si in 4.10-stable. =20
>=20
> However when I download the floppies from=20
>
ftp://snapshots.jp.freebsd.org/pub/FreeBSD/snapshots/i386/4.10-STABLE-20
> 041117-JPSNAP/floppies/     and boot from them, the hardware is not
> recognized.  Is there a minimum version of 4.10-stable I need to be=20
> using or possibly a patch that I could apply?
>=20
> Thanks in advance for your assistance. =20
>=20
>=20
> Clay Cooper
> PG Custom Solutions Engineering
> Clay_Cooper@Dell.com
>=20
>=20
> _______________________________________________
> freebsd-questions@freebsd.org mailing list=20
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to
"freebsd-questions-unsubscribe@freebsd.org"

**********************************************************************

This email and any files transmitted with it are confidential and
intended solely for the use of the individual or entity to whom they are
addressed. If you have received this email in error please notify the
system manager.

This footnote confirms that this email message has been swept for the
presence of computer viruses and is believed to be clean.

**********************************************************************



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?D74A58FD0DC39745ABA340E4EB98BDB007ADCD>