Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 13 Feb 2002 14:51:02 +0000 (GMT)
From:      Bernie Doehner <bdoehner@enterasys.com>
To:        questions@freebsd.org, <mobile@freebsd.org>, <hardware@freebsd.org>
Subject:   Re: trouble with PCMCIA running 4.4-RELEASE or 5.0-CURRENT on Tecra 8000 
Message-ID:  <20020213144712.D370-100000@kw.wireless.net>

next in thread | raw e-mail | index | archive | help
Just for documentation and whoever reads this thread in the future.
All my problems were fixed when I installed 4.5-RELEASE.  I can
run with the PCMCIA controller set to autoselect or PCIC.

Thanks to all of you who chimed in with suggestions.
Bernie

----------------------------------------------------------------------------
=== Bernie Doehner                                                       ===
=== Firmware Engineer                           Enterasys Networks, Inc. ===
=== bdoehner@enterasys.com  	                35 Industrial Way        ===
=== Office: (603) 337-1315                      Rochester, NH 03866      ===


---------- Forwarded message ----------
Date: Thu, 17 Jan 2002 18:46:51 -0800 (PST)
From: Jonathan M. Bresler <jmb@hub.freebsd.org>
To: bdoehner@enterasys.com
Cc: questions@freebsd.org, mobile@freebsd.org, hardware@freebsd.org
Subject: Re: trouble with PCMCIA running 4.4-RELEASE or 5.0-CURRENT on
    Tecra 8000


> I am trying to get 4.4-RELEASE or 5.0-CURRENT (I don't really care which one)
> running on a Toshiba Tecra 8000 laptop, but Toshiba in their infinite
> wisdom seems to have forced all devices to use IRQ 11 (which the
> latest BIOS reports are the "PCI IRQ").

Bernie,

	i am writing this email to you from my toshiba tecra 8000
	running FreeBSD 4.4-RELEASE over a wireless PCMCIA link to my
	gateway and then out to hub.freebsd.orfg.  it works just fine.

> This breaks the PCMCIA driver in 4.4-RELEASE and 5.0-CURRENT (default
> installation). I have tried various changes, such as using polled mode
> for the PCMCIA driver (under BSD), and the closest I got my
> Xircom 10/100 PCMCIA ethernet card to work is getting the card to transmit
> (and actualy got the transmit done interrupt), but no receipt interrupt.

       i did not install via the PCMCIA but rather from CDROM.   can
       you do the same?  once you have it installed, you can then try
       the Xircom card.  the problem may reside in the card, its
       driver or some interaction.

       only two items are different in our dmesg outputs...the
       quantity of memory and the size of the hard disk.

jmb


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020213144712.D370-100000>