Date: Wed, 08 Sep 2004 11:32:18 -0500 From: eculp <eculp@prodigy.net.mx> To: Ion-Mihai Tetcu <itetcu@people.tecnik93.com> Cc: current@freebsd.org Subject: Re: Sound oscillates after upgrade to kde3.3. Message-ID: <6c4916ab4d.6ab4d6c491@prodigy.net.mx>
next in thread | raw e-mail | index | archive | help
----- Mensaje original ----- De=3A Ion-Mihai Tetcu =3Citetcu=40people=2Etecnik93=2Ecom=3E Fecha=3A Mi=E9rcoles=2C Septiembre 8=2C 2004 8=3A15 am Asunto=3A Re=3A Sound oscillates after upgrade to kde3=2E3=2E =3E On Tue=2C 07 Sep 2004 17=3A43=3A58 -0500 =3E eculp =3Ceculp=40prodigy=2Enet=2Emx=3E wrote=3A =3E = =3E =3E = =3E =3E = =3E =3E ----- Mensaje original ----- =3E =3E De=3A Ion-Mihai Tetcu =3Citetcu=40people=2Etecnik93=2Ecom=3E =3E =3E Fecha=3A Martes=2C Septiembre 7=2C 2004 4=3A57 pm =3E =3E Asunto=3A Re=3A Sound oscillates after upgrade to kde3=2E3=2E =3E =3E = =3E =3E =3E On Tue=2C 07 Sep 2004 16=3A42=3A25 -0500 =3E =3E =3E eculp =3Ceculp=40prodigy=2Enet=2Emx=3E wrote=3A =3E =3E =3E = =3E =3E =3E =3E I=27m using today=27s current and just finished a kde3=2E= 3 upgrade = =3E =3E =3E following=3E the instructions in ports/UPDATING all the way d= own to =3E =3E =3E =3E = =3E =3E =3E =3E rm =7E/=2Ekde/share/config/knotifyrc =3E =3E =3E =3E = =3E =3E =3E =3E Although my problem isn=27t no sound but a high pitched = =3E oscillation=2E=3E =3E =3E = =3E =3E =3E =3E My sound is using the snd=5Fvia8233=2Eko loaded from the = =3E loader=2Econf = =3E =3E =3E which=3E also loads sound=2Eko=2E The pciconf -lv shows=3A =3E =3E =3E =3E = =3E =3E =3E =3E pcm0=40pci0=3A17=3A5=3A class=3D0x040100 card=3D0xa101101= 9 chip=3D0x30591106 =3E =3E =3E =3E rev=3D0x50 hdr=3D0x00 =3E =3E =3E =3E vendor =3D =27VIA Technologies Inc=27 =3E =3E =3E =3E device =3D =27VT8233/33A/8235/8237 AC97 Enhanced Au= dio =3E =3E =3E =3E Controller=27 =3E =3E =3E =3E class =3D multimedia =3E =3E =3E =3E subclass =3D audio =3E =3E =3E =3E = =3E =3E =3E =3E I=27ve tried disabling acpi with no change=2E I=27m runi= ng kdm and it =3E =3E =3E =3E starts at the end of the load cycle=2E =3E =3E =3E =3E = =3E =3E =3E =3E I have no idea if the problem is the OS or KDE=2E Does a= nyone = =3E have = =3E =3E =3E any=3E troubleshooting suggestions=3F =3E =3E =3E = =3E =3E =3E pcm0=40pci0=3A17=3A5=3A class=3D0x040100 card=3D0xa0021458 ch= ip=3D0x30591106 = =3E =3E =3E rev=3D0x50hdr=3D0x00 vendor =3D =27VIA Technologies Inc=27= =3E =3E =3E device =3D =27VT8233/33A/8235/8237 AC97 Enhanced Audio = =3E Controller=27=3E =3E class =3D multimedia =3E =3E =3E subclass =3D audio =3E =3E =3E = =3E =3E =3E =23 cat /dev/sndstat =3E =3E =3E FreeBSD Audio Driver (newpcm) =3E =3E =3E Installed devices=3A =3E =3E =3E pcm0=3A =3CVIA VT8235=3E at io 0xe400 irq 22 kld snd=5Fvia823= 3 (5p/1r/0v =3E =3E =3E channels duplex default) =3E =3E =3E = =3E =3E =3E seems to be OK for xmms and mplayer=2E I=27m building kde-mul= timedia =3E =3E =3E now=2E =3E =3E =3E = =3E =3E Once I stop the oscillations in kde=2C it works great but I=27m s= till =3E =3E working on a system that doesn=27t miss and I=27ve not been very =3E =3E successful=2E Basically I have to do a kldunload vo the via snd = =3E driver=2E=3E = =3E =3E Thanks for your response and let me know if you are using the sam= e =3E =3E driver and get it working without problems=2E =3E = =3E snd=5Fvia8233=5Fload=3D=22YES=22 in loader=2Econf It loads fine but my problems start when bringing up kde3=2E3=2E I am su= specting Arts=2E At the end it begins to oscillate and it is almost impo= ssible to stop withoug a reboot=2E =3A( Just so I don=27t get bored=2C I=27ve got an problem with the snd=5Fich=2E= ko that I have on one motherboard=2E I now have no really workable sound= =2E This one is a problem in current=2C I think and not kde based but I=27= m so confused now that I=27m not sure of anything=3B) Thanks=2C ed
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?6c4916ab4d.6ab4d6c491>