Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 22 Dec 2004 12:30:13 -0600
From:      Joshua Lokken <joshua.lokken@gmail.com>
To:        Bagus <bagus@cox.net>
Cc:        questions@freebsd.org
Subject:   Re: how to get it online
Message-ID:  <bc5b63850412221030349774be@mail.gmail.com>
In-Reply-To: <NFBBJMMIKLKCDJIPOPLFOEPJELAA.bagus@cox.net>
References:  <bc5b638504122208276c47bbba@mail.gmail.com> <NFBBJMMIKLKCDJIPOPLFOEPJELAA.bagus@cox.net>

next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, 22 Dec 2004 11:00:32 -0600, Bagus <bagus@cox.net> wrote:
> > > >ping freebsd.org
> > > ping: cannot resolve freebsd.org: Host name lookup failure.
> 
> > Hostname lookup failure sounds like a dns problem to me.
> > Is there anything in /etc/resolv.conf ?
> 
> No, there is not even a /etc/resolve.conf. What should go in there?
> >How is fxp0 assigned an  IP?  DHCP?
> I think so. That's the way it should be.
> 
> > If so, do you have a line like the following in /etc/rc.conf:
> > ifconfig_fxp0="DHCP"
> 
> That line was not in there. I added it and rebooted. The boot process now
> started the dhcp client, but still no actual ip address is reported in the
> ifconfig.
> >
> > How did you setup the Linksys?  Default (out-of-the-box) settings?
> 
> plugged it in, plugged cable modem into uplink, plugged this pc into one
> outlet, the freebsd box into another. PC works fine. Lights indicate
> connectivity to bsd box.
> 
> > Is the DHCP server turned on at the router?  What does the status
> > page of the router settings show?
> >
> 
> That's supposed to be http://192.168.1.1, isn't it? I can't access that even
> from my pc. Any advice there would be helpful. BTW, I'm using Cox as a 
> ISP.

You can set fxp0 to use a static IP until you get the router working.
# ifconfig fxp0 inet 192.168.1.2 netmask 255.255.255.0
# route add default 192.168.1.1

In /etc/rc.conf, you should have:

ifconfig_fxp0="DHCP"
defaultrouter="192.168.1.1"

You should be able to login to the Linksys admin page:

http://192.168.1.1    AFAIK, most of the Linksys home networking
devices use a blank username and password 'admin' by default.

Make sure that the DHCP server is enabled, and restart.

HTH,
-- 
Joshua Lokken
Open Source Advocate



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?bc5b63850412221030349774be>