Date: Thu, 6 Jul 2000 23:37:22 -0400 (EDT) From: Adam <bsdx@looksharp.net> To: dave <dmehler22@earthlink.net> Cc: freebsd-hardware@freebsd.org Subject: Re: configuring a pnp modem. Message-ID: <Pine.BSF.4.21.0007062334530.407-100000@turtle.looksharp.net> In-Reply-To: <000801bfe88b$db78f9e0$0200a8c0@hellraiser>
next in thread | previous in thread | raw e-mail | index | archive | help
Hmm - I dont know what to say. The modem seems to be listed in sources
at least as old as 4.0-release..
{0x30307256, NULL}, /* USR3030 - U.S. Robotics 56K FAX INT */
This line is in /usr/src/sys/isa/sio.c
On Fri, 7 Jul 2000, dave wrote:
>Hello,
> Thanks for the reply. Below is the output of pnpinfo, I hope it helps.
>Again, I'm using fbsd 4.0-release.
>Thanks.
>Dave.
>Checking for Plug-n-Play devices...
*other pnp devices snipped*
>Card assigned CSN #2
>Vendor ID USR3030 (0x30307256), Serial Number 0xaebc8fb4
>PnP Version 1.0, Vendor Version 0
>Device Description: U.S. Robotics 56K FAX INT
>
>Logical Device ID: USR3030 0x30307256 #0
>TAG Start DF
>Good Configuration
> I/O Range 0x2f8 .. 0x2f8, alignment 0x8, len 0x8
> [16-bit addr]
> IRQ: 3 5 7 - only one type (true/edge)
>TAG Start DF
>Acceptable Configuration
> I/O Range 0x3f8 .. 0x3f8, alignment 0x8, len 0x8
> [16-bit addr]
> IRQ: 2 3 4 5 7 - only one type (true/edge)
>TAG Start DF
>Acceptable Configuration
> I/O Range 0x3e8 .. 0x3e8, alignment 0x8, len 0x8
> [16-bit addr]
> IRQ: 2 3 4 5 7 - only one type (true/edge)
>TAG Start DF
>Acceptable Configuration
> I/O Range 0x2e8 .. 0x2e8, alignment 0x8, len 0x8
> [16-bit addr]
> IRQ: 2 3 4 5 7 - only one type (true/edge)
>TAG Start DF
>Acceptable Configuration
>TAG End DF
>End Tag
>
>Successfully got 17 resources, 1 logical fdevs
>-- card select # 0x0002
>
>CSN USR3030 (0x30307256), Serial Number 0xaebc8fb4
>
>Logical device #0
>IO: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
>IRQ 0 0
>DMA 4 4
>IO range check 0x00 activate 0x01
>
>----- Original Message -----
>From: "Adam" <bsdx@looksharp.net>
>To: "dave" <dmehler22@earthlink.net>
>Cc: <freebsd-hardware@FreeBSD.ORG>
>Sent: Thursday, July 06, 2000 7:28 PM
>Subject: Re: configuring a pnp modem.
>
>
>> I had one working in 2.2.x or 3.x a few years ago, but since the pnp
>> system is different now you'll probably have to glean some identification
>> info from the pnpinfo command and stuff it in the sio driver so it
>> recognizes and configures the modem. If you cant handle all this, at
>> least post back with the pnpinfo output so someone else can give it a
>> shot. Good luck!
>>
>> On Fri, 7 Jul 2000, dave wrote:
>>
>> >Hello,
>> > Has anyone got a plug and play modem, not a winmodem, working under
>fbsd 4.0? If so, please tell me how as I have been unable to get mine
>working.
>> >Thanks.
>> >Dave.
>> >
>> >
>>
>>
>
>
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hardware" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0007062334530.407-100000>