Date: Thu, 30 Mar 2000 19:44:56 -0600 From: Mike Kiefer <mikiefer@earthlink.net> To: questions@freebsd.org Subject: NFS Client Problem Message-ID: <38E40318.94EA6B87@earthlink.net>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
--------------FF1CE3270BB9ACDC3C1DFE6C
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
I have 2 RedHat 6.1 boxes that are running NFSD. I can't mount the
exported directories from either one of them. I have the Portmapper
service running on the FreeBSD box, but every time I use the mount_nfs
command I get "NFS Portmap: RPC: Program not registered". I can export
directories from the FreeBSD box to the Linux boxes without any problem.
What do I need to do to make the NFS Client work?? I have been hammering
away at this for the last 4 days, and I'm not very experienced with
FreeBSD. Thanks in advance!!
--------------FF1CE3270BB9ACDC3C1DFE6C
Content-Type: text/plain; charset=us-ascii;
name="dmesg"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="dmesg"
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-20000307-CURRENT #0: Tue Mar 28 18:36:51 CST 2000
root@PileDriver.localnet:/usr/src/sys/compile/GOODn2
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD-K6(tm) 3D processor (400.91-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x58c Stepping = 12
Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX>
AMD Features=0x80000800<SYSCALL,3DNow!>
real memory = 100597760 (98240K bytes)
avail memory = 94285824 (92076K bytes)
Preloaded elf kernel "kernel" at 0xc030a000.
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI Mach64-GB graphics accelerator> at 0.0
isab0: <VIA 82C586 PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C586 ATA33 controller> port 0xe400-0xe40f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pcib2: <PCI to PCI bridge (vendor=1106 device=3040)> at device 7.3 on pci0
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xe800-0xe87f mem 0xe9000000-0xe900007f irq 11 at device 8.0 on pci0
xl0: Ethernet address: 00:10:4b:69:2a:ed
miibus0: <MII bus> on xl0
xlphy0: <3Com internal media interface> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: IEEE1284 device found /NIBBLE/ECP
Probing for PnP devices on ppbus0:
ppbus0: <HEWLETT-PACKARD DESKJET 810C> MLC,PCL,PML
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
sbc1: <Creative ViBRA16X> at port 0x220-0x22f,0x330-0x331,0x388-0x38b irq 5 drq 1,3 on isa0
sbc1: setting card to irq 5, drq 1, 3
pcm0: <SB DSP 4.16 (ViBRA16X)> on sbc1
unknown0: <Game> at port 0x201 on isa0
ad0: 9765MB <Maxtor 91024U4> [19841/16/63] at ata0-master using UDMA33
acd0: CDROM <CREATIVECD4831E> at ata1-slave using PIO4
Mounting root from ufs:/dev/ad0s1a
--------------FF1CE3270BB9ACDC3C1DFE6C
Content-Type: text/plain; charset=us-ascii;
name="info"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="info"
FreeBSD PileDriver.localnet 4.0-20000307-CURRENT FreeBSD 4.0-20000307-CURRENT #0: Tue Mar 28 18:36:51 CST 2000 root@PileDriver.localnet:/usr/src/sys/compile/GOODn2 i386
--------------FF1CE3270BB9ACDC3C1DFE6C--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?38E40318.94EA6B87>