Date: Thu, 6 Apr 2006 16:54:48 +0200 From: usleepless@gmail.com To: "Daniel A." <ldrada@gmail.com> Cc: freebsd-questions <freebsd-questions@freebsd.org> Subject: Re: FreeBSD hangs at boot Message-ID: <c39ec84c0604060754i33e44e49h74abdd8ef23fe327@mail.gmail.com> In-Reply-To: <5ceb5d550604051640h5d122151ke2e9b4d02c852abe@mail.gmail.com> References: <5ceb5d550604051640h5d122151ke2e9b4d02c852abe@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Daniel, the only thing i can think of at the moment is go on removing hardware. remove the cd, the slave-hd etc. i can understand if you are not happy about it, it is your decision. regards, usleep On 4/6/06, Daniel A. <ldrada@gmail.com> wrote: > Hi. > I am trying to get FreeBSD 6.0 running on my desktop machine, but with no > luck. > When I boot in anything but Safe Mode, FreeBSD will hang at boot and > refuse to go further. I've tried to let have a go at it for 30 > minutes, but the boot process didnt get any further. > > When I try to boot the machine normally, it freezes at the following poin= t: > [...] > ad0: 76319MB <Seagate ST380021A 3.19> at ata0-master PIO4 > ad1: 76319MB <Seagate ST380021A 3.19> at ata0-slave PIO4 > acd0: DVDR <PLEXTOR DVDR PX-740A/1.01> at ata1-master PIO4 > ad8: 114473MB <Seagate ST3120022A 3.06> at ata4-master PIO4 > > The ad8 device is attached to my onboard "Promise PDC20376 SATA150 > controller", but even if I disable that device in BIOS, the system > then freezes after displaying: > acd0: DVDR <PLEXTOR DVDR PX-740A/1.01> at ata1-master PIO4 > > Attached is the dmesg.boot I get when the SATA RAID controller is > enabled and I boot in safe mode. > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?c39ec84c0604060754i33e44e49h74abdd8ef23fe327>