Date: Thu, 4 Sep 2003 19:47:47 -0500 From: Chris <racerx@makeworld.com> To: questions@freebsd.org Subject: Philips JackRabbit USB Burner Question Message-ID: <200309041947.47108.racerx@makeworld.com>
next in thread | raw e-mail | index | archive | help
Hiya people,
I used a Philips Jack Rabbit USB CD-R/RW under Winders2k, I pooped this bad
boy onto my 4.8 install and here are some lines from my dmesg -
usb0: <Intel 82801AA (ICH) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
umass0: PHILIPS USB Storage Device , rev 2.00/11.06, addr 2
pci0: <unknown card> (vendor=0x8086, dev=0x2413) at 31.3 irq 10
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff on isa0
The question is simply, can I use this? If so, what would the suggested
device be? After looking at the /dev/MAKEDEV file, here's what I might guess:
# USB devices:
# usb* USB bus control device
# ucom* USB serial devices
# ugen* generic USB device
# uhid* Human Interface Device (HID)
# ulpt* printer
# umodem* modems
# ums* mouse
# urio* Diamond Rio 500
# uscanner* USB scanners
Perhaps a MAKEDEV usgen0 might work?
--
Best regards,
Chris
______________________________________________________________________
PGP Fingerprint = D976 2575 D0B4 E4B0 45CC AA09 0F93 FF80 C01B C363
PGP Mail encouraged / preferred - keys available on common key servers
______________________________________________________________________
01010010011000010110001101100101011100100101100000000000
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200309041947.47108.racerx>