Date: Sat, 7 Aug 1999 13:00:16 -0700 From: Nick Martin <nim@caerbanog.nimlabs.org> To: "Andrej V. Olejnik (Andy V. Oleynik)" <andyo@prime.net.ua> Cc: freebsd-stable@freebsd.org Subject: Re: Several Bugs (or maybe Features) (looks like known bug , see PR) Message-ID: <19990807130016.H442@neglekt.lwhs.org> In-Reply-To: <37AB31B6.872AFD8B@prime.net.ua>; from Andrej V. Olejnik@caerbanog (Andy V. Oleynik) on Fri, Aug 06, 1999 at 10:04:23PM %2B0300 References: <19990805052951.A72463@caerbanog.nimlabs.org> <19990806203429.A2789@dblab.ece.ntua.gr> <37AB31B6.872AFD8B@prime.net.ua>
next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, Aug 06, 1999 at 10:04:23PM +0300, Andrej V. Olejnik@caerbanog (Andy V. Oleynik) wrote:
> Could U pleas send ur dmesg & MBD/CPU specifications?
> Yiorgos Adamopoulos wrote:
I think I found the answer to why the clock is slow in a PR, namely to
turn off apm support. But that still doesnt tell me how to get the thing
to reboot properly (which is also very important).
OK, here is the full dmesg from that box:
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.2-STABLE #3: Wed Aug 4 09:13:58 PDT 1999
nim@caerbanog.nimlabs.org:/usr/src/sys/compile/CAERBANOG
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 74704326 Hz
CPU: AMD K5 model 0 (74.70-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x500 Stepping=0
Features=0x3bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,APIC>
real memory = 33554432 (32768K bytes)
avail memory = 29786112 (29088K bytes)
Preloaded elf kernel "kernel" at 0xc02ed000.
Probing for devices on PCI bus 0:
chip0: <Host to PCI bridge (vendor=1106 device=0576)> rev 0x02 on pci0.0.0
ide_pci0: <PCI IDE controller (busmaster capable)> rev 0x04 on pci0.1.0
de0: <Digital 21140A Fast Ethernet> rev 0x22 int a irq 11 on pci0.9.0
de0: Asante 21140A [10-100Mb/s] pass 2.2
de0: address 00:00:94:a1:a6:d7
de0: enabling 10baseT port
Qlogic ISP Driver, FreeBSD CAM Version 0.991, Core Version 1.8
isp0: <Qlogic ISP 1020/1040 PCI SCSI Adapter> rev 0x02 int a irq 10 on pci0.10.0
isp0: using Memory space register mapping
isp0: set PCI line size to 16
isp0: set PCI latency to 64
isp0: Board Revision 1020A, loaded F/W Revision 7.63.0
isp0: not supporting QFRZ option for target 0
isp0: not supporting QFRZ option for target 1
isp0: not supporting QFRZ option for target 2
isp0: not supporting QFRZ option for target 3
isp0: not supporting QFRZ option for target 4
isp0: not supporting QFRZ option for target 5
isp0: not supporting QFRZ option for target 6
isp0: not supporting QFRZ option for target 7
isp0: not supporting QFRZ option for target 8
isp0: not supporting QFRZ option for target 9
isp0: not supporting QFRZ option for target 10
isp0: not supporting QFRZ option for target 11
isp0: not supporting QFRZ option for target 12
isp0: not supporting QFRZ option for target 13
isp0: not supporting QFRZ option for target 14
isp0: not supporting QFRZ option for target 15
isp0: skipping settings for target 8 bus 0
isp0: skipping settings for target 9 bus 0
isp0: skipping settings for target 10 bus 0
isp0: skipping settings for target 11 bus 0
isp0: skipping settings for target 12 bus 0
isp0: skipping settings for target 13 bus 0
isp0: skipping settings for target 14 bus 0
isp0: skipping settings for target 15 bus 0
Probing for PnP devices:
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
psm0 not found
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <Maxtor 82160D2>
wd0: 2060MB (4219425 sectors), 4465 cyls, 15 heads, 63 S/T, 512 B/S
wdc1 not found at 0x170
ppc0 at 0x378 irq 7 flags 0x40 on isa
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
plip0: <PLIP network interface> on ppbus 0
ep0 not found at 0x300
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
Waiting 5 seconds for SCSI devices to settle
isp0: driver initiated bus reset of bus 0
isp0: target 0 lun 0 had an unexpected bus free
isp0: Auto Request Sense failed for target 0 lun 0
chanda0 at isp0 bus 0 target 0 lun 0
da0: <QUANTUM LPS540S 590S> Fixed Direct Access SCSI-2 device
da0: 10.000MB/s transfers (10.000MHz, offset 8)
da0: 516MB (1057616 512 byte sectors: 64H 32S/T 516C)
ging root device to wd0s1a
WARNING: / was not properly dismounted
de0: abnormal interrupt: transmit underflow (raising TX threshold to 96|256)
de0: abnormal interrupt: transmit underflow (raising TX threshold to 128|512)
de0: abnormal interrupt: transmit underflow (raising TX threshold to 160|1024)
de0: abnormal interrupt: transmit underflow (switching to store-and-forward mode)
Hope that helps.
--
Nick Martin, nim@nimlabs.org, http://www.nimlabs.org
If God didn't mean for us to juggle, tennis balls wouldn't come three
to a can.
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19990807130016.H442>