Date: Sun, 9 Jan 2005 10:54:34 +0000 (UTC) From: "Bjoern A. Zeeb" <bzeeb-lists@lists.zabbadoz.net> To: Chris Landauer <cal@rush.aero.org> Cc: bzeeb+freebsd+sk4@zabbadoz.net Subject: Re: sk0 driver problem and (with luck) approach to a fix Message-ID: <Pine.BSF.4.53.0501091047220.67312@e0-0.zab2.int.zabbadoz.net> In-Reply-To: <Pine.BSF.4.53.0501090924040.67312@e0-0.zab2.int.zabbadoz.net> References: <200501090745.j097jFfb062272@calamari.aero.org> <Pine.BSF.4.53.0501090924040.67312@e0-0.zab2.int.zabbadoz.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, 9 Jan 2005, Bjoern A. Zeeb wrote: > On Sat, 8 Jan 2005, Chris Landauer wrote: > ... > > Marvell Yukon 88E8050 PCI Express Gigabit Ethernet Adapter > ... > > relevant output from pciconf -l -v: > > > > skc0@pci3:0:0: class=0x020000 card=0x3032107b chip=0x436111ab rev=0x17 hdr=0x00 > > vendor = 'Marvell Semiconductor (Was: Galileo Technology Ltd)' > > class = network > > subclass = ethernet > > > > relevant output from dmesg: > > > > skc0: <Marvell Gigabit Ethernet> port 0x2000-0x20ff mem 0xc8100000-0xc8103fff irq 17 at device 0.0 on pci3 > > skc0: unknown device! > > device_attach: skc0 attach returned 6 > ... > > I have added following patch > http://sources.zabbadoz.net/freebsd/patchset/EXPERIMENTAL/if_sk-marvell-88e8050-id.diff had been told that this will only make the phy 'work' but there are other problems. Someone else seems to work on it but I don't know anything more beyond that yet. -- Bjoern A. Zeeb bzeeb at Zabbadoz dot NeT
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.53.0501091047220.67312>