Date: Fri, 25 Sep 2009 18:18:05 -0400 (EDT) From: Daniel Eischen <deischen@freebsd.org> To: Joe Marcus Clarke <marcus@marcuscom.com> Cc: freebsd-current@freebsd.org Subject: Re: hald spins in a poll/read loop against /dev/usb with CURRENT Message-ID: <Pine.GSO.4.64.0909251812550.17362@sea.ntplx.net> In-Reply-To: <1253916251.1274.25.camel@shumai.marcuscom.com> References: <426bed110909250623j44c25ba8o97ded8393f5297a9@mail.gmail.com> <20090925153212.67247375@ernst.jennejohn.org> <426bed110909251459p50ca5564mee568e14bd26d8cd@mail.gmail.com> <1253916251.1274.25.camel@shumai.marcuscom.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, 25 Sep 2009, Joe Marcus Clarke wrote: >> >> I've rebuilt hald (hal-0.5.11_26) after checking out 8/stable under >> /usr/src/sys. Same problem. A spin loop of poll/read, with /dev/usb >> responding to poll() but not to read(). > > Insufficient. You need to be running on a world/kernel which are in > sync with each other. You also need to make sure the libusb port is no > longer installed, and that you have run "make delete-old" after the > upgrade. Then rebuild hal. With regard to the libusb port problems, shouldn't the ports prefer/configure to use libusb20 when it is present, so that it wouldn't matter if libusb was installed or not? -- DE
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.GSO.4.64.0909251812550.17362>