Date: Wed, 25 Jul 2001 14:27:02 -0500 From: Ben Kadish <Ben.Kadish@happcontrols.com> To: freebsd-questions@FreeBSD.org Subject: FreeBSD-STABLE build problems Message-ID: <5.1.0.14.0.20010725135643.0255ae98@mail.happcontrols.com>
next in thread | raw e-mail | index | archive | help
Hello, I'm trying to do a kernel build off of the up-to-the-minute STABLE source branch, and I'm getting an error with a kernel build (make buildworld and installworld work just fine, and a GENERIC kernel build works as well). The error comes during a "make all", and is as follows: "===> ipfilter make: don't know how to make /usr/src/sys/modules/ipfilter/../../netinet/mlfk_ipl.c. Stop" machine i386 #cpu I386_CPU #cpu I486_CPU cpu I586_CPU cpu I686_CPU ident NSKERNEL maxusers 64 options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options INET6 #IPv6 communications protocols options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options SOFTUPDATES #Enable FFS soft updates support options MFS #Memory Filesystem options MD_ROOT #MD is a potential root device options NFS #Network Filesystem options NFS_ROOT #NFS usable as root device, NFS required options CD9660 #ISO 9660 Filesystem options CD9660_ROOT #CD-ROM usable as root, CD9660 required options PROCFS #Process filesystem options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI options UCONSOLE #Allow users to grab the console options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options KTRACE #ktrace(1) support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options P1003_1B #Posix P1003_1B real-time extensions options _KPOSIX_PRIORITY_SCHEDULING options ICMP_BANDLIM #Rate limit bad replies options KBD_INSTALL_CDEV # install a CDEV entry in /dev device isa device pci device fdc0 at isa? port IO_FD1 irq 6 drq 2 device fd0 at fdc0 drive 0 device fd1 at fdc0 drive 1 device ata0 at isa? port IO_WD1 irq 14 device ata1 at isa? port IO_WD2 irq 15 device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives device atapifd # ATAPI floppy drives device atapist # ATAPI tape drives options ATA_STATIC_ID #Static device numbering device ahb # EISA AHA1742 family device ahc # AHA2940 and onboard AIC7xxx devices device aha0 at isa? device aic0 at isa? device scbus # SCSI bus (required) device da # Direct Access (disks) device sa # Sequential Access (tape etc) device cd # CD device pass # Passthrough device (direct SCSI access) device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID device aac # Adaptec FSA RAID, Dell PERC2/PERC3 device ida # Compaq Smart RAID device atkbdc0 at isa? port IO_KBD device atkbd0 at atkbdc? irq 1 flags 0x1 device psm0 at atkbdc? irq 12 device vga0 at isa? pseudo-device splash device sc0 at isa? flags 0x100 device npx0 at nexus? port IO_NPX irq 13 device apm0 at nexus? disable flags 0x20 # Advanced Power Management device sio0 at isa? port IO_COM1 flags 0x10 irq 4 device sio1 at isa? port IO_COM2 irq 3 device sio2 at isa? disable port IO_COM3 irq 5 device sio3 at isa? disable port IO_COM4 irq 9 device ppc0 at isa? irq 7 device ppbus # Parallel port bus (required) device lpt # Printer #device ppi # Parallel port interface device device de # DEC/Intel DC21x4x (``Tulip'') device vx # 3Com 3c590, 3c595 (``Vortex'') device miibus # MII bus support device dc # DEC/Intel 21143 and various workalikes device fxp # Intel EtherExpress PRO/100B (82557, 82558) device pcn # AMD Am79C97x PCI 10/100 NICs device rl # RealTek 8129/8139 device sf # Adaptec AIC-6915 (``Starfire'') device sis # Silicon Integrated Systems SiS 900/SiS 7016 device ste # Sundance ST201 (D-Link DFE-550TX) device tl # Texas Instruments ThunderLAN device tx # SMC EtherPower II (83c170 ``EPIC'') device vr # VIA Rhine, Rhine II device wb # Winbond W89C840F device wx # Intel Gigabit Ethernet Card (``Wiseman'') device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') device ed0 at isa? port 0x280 irq 10 iomem 0xd8000 device ie0 at isa? port 0x300 irq 10 iomem 0xd0000 device lnc0 at isa? port 0x280 irq 10 drq 0 device cs0 at isa? port 0x300 device sn0 at isa? port 0x300 irq 10 pseudo-device loop # Network loopback pseudo-device ether # Ethernet support pseudo-device pty # Pseudo-ttys (telnet etc) pseudo-device md # Memory "disks" pseudo-device bpf #Berkeley packet filter I've been staring at this thing for awhile and it looks identical to other builds I've done (except that in trying to troubleshoot I've left much more in than I have with my builds on the 4.3-RELEASE source tree). Please help. Thanks, Ben Ben Kadish Ben@happcontrols.com Network Analyst Happ Controls, Inc. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5.1.0.14.0.20010725135643.0255ae98>