Date: Sat, 10 Nov 2012 11:25:23 GMT From: Tilman Blumhagen <tilman.blumhagen@googlemail.com> To: freebsd-gnats-submit@FreeBSD.org Subject: ports/173526: xscreensaver rapidly fills Xorg.0.log with (II) lines and causes high system load Message-ID: <201211101125.qAABPNg8016547@red.freebsd.org> Resent-Message-ID: <201211101130.qAABU1uc008590@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 173526 >Category: ports >Synopsis: xscreensaver rapidly fills Xorg.0.log with (II) lines and causes high system load >Confidential: no >Severity: non-critical >Priority: low >Responsible: freebsd-ports-bugs >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Sat Nov 10 11:30:00 UTC 2012 >Closed-Date: >Last-Modified: >Originator: Tilman Blumhagen >Release: 9.1 PRERELEASE >Organization: >Environment: FreeBSD myhost 9.1-PRERELEASE FreeBSD 9.1-PRERELEASE #0: Thu Nov 8 22:03:32 CET 2012 root@myhost:/usr/obj/usr/src/sys/GENERIC amd64 >Description: When starting xscreensaver all CPU cores are under high load and I hear my hard disk suddenly being very active. The file /var/log/Xorg.0.log grows unusually fast (aroung 1KiB per second). Watching the logfile growing: $ ls -lh /var/log/Xorg.0.log -rw-r--r-- 1 root wheel 997k Nov 10 12:03 /var/log/Xorg.0.log $ ls -lh /var/log/Xorg.0.log -rw-r--r-- 1 root wheel 1.1M Nov 10 12:03 /var/log/Xorg.0.log Lines in the logfile (it seems to be repeatedly the same stuff): [ 10341.249] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) [ 10341.249] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) [ 10341.249] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 10341.249] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) [ 10341.249] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) [ 10341.249] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) [ 10341.249] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) [ 10341.249] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) [ 10341.595] (II) intel(0): EDID vendor "SAM", prod id 536 [ 10341.595] (II) intel(0): Using hsync ranges from config file [ 10341.595] (II) intel(0): Using vrefresh ranges from config file [ 10341.595] (II) intel(0): Printing DDC gathered Modelines: [ 10341.595] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz ) [ 10341.595] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 10341.595] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) [ 10341.595] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) [ 10341.595] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz) [ 10341.595] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz) [ 10341.595] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [ 10341.595] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) [ 10341.595] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz ) [ 10341.595] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) [ 10341.595] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) [ 10341.595] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 10341.595] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) [ 10341.595] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) [ 10341.595] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) [ 10341.595] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) [ 10341.595] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) [ 10341.948] (II) intel(0): EDID vendor "SAM", prod id 536 [ 10341.948] (II) intel(0): Using hsync ranges from config file [ 10341.948] (II) intel(0): Using vrefresh ranges from config file [ 10341.948] (II) intel(0): Printing DDC gathered Modelines: [ 10341.948] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz ) [ 10341.948] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 10341.948] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) [ 10341.948] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) [ 10341.948] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz) [ 10341.948] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz) [ 10341.948] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) >How-To-Repeat: run "xscreensaver -nosplash". It also happens while the settings dialog is open. So its probably does not depend on how xscreensaver is started. >Fix: >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201211101125.qAABPNg8016547>