Date: Fri, 4 Jan 2002 15:09:06 +0100 From: "Tom Buelens" <email@tombuelens.com> To: <freebsd-mobile@freebsd.org> Subject: Exotics Message-ID: <001701c19529$5f94f580$aa1ba182@tomputer>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format. ------=_NextPart_000_0014_01C19531.C0AFB000 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hello all, Santa, diguised as a friend @ intersil (former nowiresneed), gave me = some exotic cards. I would like to get them working on freebsd 4.4 (using generic now). That's why I added this to my /etc/default/pccard.conf: # SWALLOW card "No Wires Needed" "11 Mbps Wireless LAN PC Card" config auto "wi" ? 0x10000 insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop and tried other drivers (awi) and without the 0x10000 flag. Mainly I get kernel panics (I think cuz of a conflict wit my xe0) and this Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.4-RELEASE #0: Fri Dec 28 17:34:47 GMT 2001 root@tomputer.hc.congress.ccc.de:/usr/src/sys/compile/GENERIC Timecounter "i8254" frequency 1193182 Hz CPU: Pentium II/Pentium II Xeon/Celeron (331.71-MHz 686-class CPU) Origin =3D "GenuineIntel" Id =3D 0x66a Stepping =3D 10 = Features=3D0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,= CMOV,PA T,PSE36,MMX,FXSR> real memory =3D 134152192 (131008K bytes) .... Mounting root from ufs:/dev/ad0s1a pccard: card inserted, slot 1 xe0 at port 0x2e8-0x2ef iomem 0xcc000-0xccfff irq 10 slot 1 on pccard1 xe0: Xircom CEM56, bonding version 0x55, 100Mbps capable, with modem xe0: DingoID =3D 0x444b, RevisionID =3D 0, VendorID =3D 0 xe0: Ethernet address 00:80:c7:26:d9:e3 xe0: watchdog timeout; resetting card pccard: card inserted, slot 0 wi0: <WaveLAN/IEEE 802.11> at port 0x240-0x27f irq 10 slot 0 on pccard0 wi0: init failed wi0: mac read failed 5 device_probe_and_attach: wi0 attach returned 5 pccard: card removed, slot 0 pccard: card inserted, slot 0 wi0: <WaveLAN/IEEE 802.11> at port 0x240-0x27f irq 10 slot 0 on pccard0 wi0: init failed wi0: mac read failed 5 device_probe_and_attach: wi0 attach returned 5 Fatal trap 12: page fault while in kernel mode fault virtual address =3D 0x14 fault code =3D supervisor read, page not present instruction pointer =3D 0x8:0xc01c24c6 stack pointer =3D 0x10:0xc039f6d0 frame pointer =3D 0x10:0xc039f6d0 code segment =3D base 0x0, limit 0xfffff, type 0x1b =3D DPL 0, pres 1, def32 1, gran 1 processor eflags =3D interrupt enabled, resume, IOPL =3D 0 current process =3D Idle interrupt mask =3D net tty=20 trap number =3D 12 panic: page fault syncing disks...=20 and dumpcis gives me this : Configuration data for card in slot 0 Tuple #1, code =3D 0x1 (Common memory descriptor), length =3D 2 000: 00 ff Common memory device information: Device number 1, type No device, WPS =3D OFF Speed =3D No speed, Memory block size =3D reserved, 32 units Tuple #2, code =3D 0x1c (Other conditions for common memory), length =3D = 4 000: 01 00 00 ff (MWAIT) Tuple #3, code =3D 0x15 (Version 1 info), length =3D 48 000: 05 00 4e 6f 20 57 69 72 65 73 20 4e 65 65 64 65 010: 64 00 31 31 20 4d 62 70 73 20 57 69 72 65 6c 65 020: 73 73 20 4c 41 4e 20 50 43 20 43 61 72 64 00 ff Version =3D 5.0, Manuf =3D [No Wires Needed], card vers =3D [11 = Mbps Wireless LAN PC Card] Tuple #4, code =3D 0x20 (Manufacturer ID), length =3D 4 000: 02 06 03 00 PCMCIA ID =3D 0x602, OEM ID =3D 0x3 Tuple #5, code =3D 0x1a (Configuration map), length =3D 5 000: 01 30 00 01 07 Reg len =3D 2, config register addr =3D 0x100, last config =3D = 0x30 Registers: XXX-----=20 Tuple #6, code =3D 0x1b (Configuration entry), length =3D 19 000: f0 81 9d 76 b5 1e 55 36 56 55 e8 14 2f 46 30 ff 010: ff 28 00 Config index =3D 0x30(default) Interface byte =3D 0x81 (I/O) wait signal supported Vcc pwr: Minimum operating supply voltage: 3 x 1V, ext =3D 0x1e Maximum operating supply voltage: 5 x 1V Max current average over 1 second: 3 x 100mA Max current average over 10 ms: 5 x 100mA Power down supply current: 5 x 10mA Wait scale Speed =3D 1.2 x 10 us RDY/BSY scale Speed =3D 2.0 x 10 ms, scaled by 100 Card decodes 6 address lines, limited 8/16 Bit I/O IRQ modes: Level IRQs: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Max twin cards =3D 0 Misc attr: (Audio-BVD2) (Power down supported) Tuple #7, code =3D 0x21 (Functional ID), length =3D 2 000: 06 00 Network/LAN adapter Tuple #8, code =3D 0x22 (Functional EXT), length =3D 2 000: 01 07 Network technology: Wireless Tuple #9, code =3D 0x22 (Functional EXT), length =3D 5 000: 02 c0 d8 a7 00 Network speed: 11 Mb/sec Tuple #10, code =3D 0x22 (Functional EXT), length =3D 2 000: 03 07 Network media: 2.4 GHz Tuple #11, code =3D 0x14 (No link), length =3D 0 Tuple #12, code =3D 0xff (Terminator), length =3D 0 Code 136 not found Code 136 not found code Unknown ignored Configuration data for card in slot 1 [blabla...] Could ne1 give me a clue ? Thanks in advance. Cheers, Tom ------=_NextPart_000_0014_01C19531.C0AFB000 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=3DContent-Type content=3D"text/html; = charset=3Diso-8859-1"> <META content=3D"MSHTML 6.00.2712.300" name=3DGENERATOR> <STYLE></STYLE> </HEAD> <BODY bgColor=3D#ffffff> <DIV>Hello all,<BR><BR>Santa, diguised as a friend @ intersil (former=20 nowiresneed), gave me some exotic cards.<BR>I would like to get = them=20 working on freebsd 4.4 (using generic now).<BR>That's why I added this = to my=20 /etc/default/pccard.conf:<BR><BR># SWALLOW<BR>card "No Wires Needed" "11 = Mbps=20 Wireless LAN PC Card"<BR> = config auto=20 "wi" ? 0x10000<BR> = insert =20 /etc/pccard_ether $device = start<BR> =20 remove /etc/pccard_ether $device stop<BR><BR>and tried other = drivers (awi)=20 and without the 0x10000 flag.<BR>Mainly I get kernel panics (I think cuz = of a=20 conflict wit my xe0) and<BR>this<BR><BR><BR>Copyright (c) 1992-2001 The = FreeBSD=20 Project.<BR>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, = 1992,=20 1993,<BR>1994<BR> The Regents = of the=20 University of California. All rights<BR>reserved.<BR>FreeBSD 4.4-RELEASE = #0: Fri=20 Dec 28 17:34:47 GMT 2001<BR> <A=20 href=3D"mailto:root@tomputer.hc.congress.ccc.de:/usr/src/sys/compile/GENE= RIC">root@tomputer.hc.congress.ccc.de:/usr/src/sys/compile/GENERIC</A><BR= >Timecounter=20 "i8254" frequency 1193182 Hz<BR>CPU: Pentium II/Pentium II = Xeon/Celeron=20 (331.71-MHz 686-class CPU)<BR> Origin =3D "GenuineIntel" Id = =3D=20 0x66a Stepping =3D=20 10<BR> Features=3D0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SE= P,MTRR,PGE,MCA,CMOV,PA<BR>T,PSE36,MMX,FXSR><BR>real=20 memory =3D 134152192 (131008K bytes)<BR><BR>....<BR><BR>Mounting = root from=20 ufs:/dev/ad0s1a<BR>pccard: card inserted, slot 1<BR>xe0 at port = 0x2e8-0x2ef=20 iomem 0xcc000-0xccfff irq 10 slot 1 on pccard1<BR>xe0: Xircom CEM56, = bonding=20 version 0x55, 100Mbps capable, with modem<BR>xe0: DingoID =3D 0x444b, = RevisionID =3D=20 0, VendorID =3D 0<BR>xe0: Ethernet address 00:80:c7:26:d9:e3<BR>xe0: = watchdog=20 timeout; resetting card<BR>pccard: card inserted, slot 0<BR>wi0:=20 <WaveLAN/IEEE 802.11> at port 0x240-0x27f irq 10 slot 0=20 on<BR>pccard0<BR>wi0: init failed<BR>wi0: mac read failed=20 5<BR>device_probe_and_attach: wi0 attach returned 5<BR>pccard: card = removed,=20 slot 0<BR>pccard: card inserted, slot 0<BR>wi0: <WaveLAN/IEEE = 802.11> at=20 port 0x240-0x27f irq 10 slot 0 on<BR>pccard0<BR>wi0: init failed<BR>wi0: = mac=20 read failed 5<BR>device_probe_and_attach: wi0 attach returned = 5<BR><BR>Fatal=20 trap 12: page fault while in kernel mode<BR>fault virtual = address =3D=20 0x14<BR>fault=20 code &nb= sp; =20 =3D supervisor read, page not present<BR>instruction=20 pointer =3D 0x8:0xc01c24c6<BR>stack=20 pointer =3D=20 0x10:0xc039f6d0<BR>frame=20 pointer =3D=20 0x10:0xc039f6d0<BR>code=20 segment = =3D base=20 0x0, limit 0xfffff, type=20 0x1b<BR>  = ; = =20 =3D DPL 0, pres 1, def32 1, gran 1<BR>processor=20 eflags =3D interrupt enabled, = resume,=20 IOPL =3D 0<BR>current = process =3D=20 Idle<BR>interrupt = mask =3D=20 net tty <BR>trap=20 number &= nbsp; =3D=20 12<BR>panic: page fault<BR><BR>syncing disks... <BR><BR><BR><BR>and = dumpcis=20 gives me this :<BR><BR><BR><BR>Configuration data for card in slot=20 0<BR><BR>Tuple #1, code =3D 0x1 (Common memory descriptor), length =3D=20 2<BR><BR> 000: 00=20 ff<BR><BR> Common memory = device=20 information:<BR><BR>  = ; =20 Device number 1, type No device, WPS =3D=20 OFF<BR><BR> &n= bsp; =20 Speed =3D No speed, Memory block size =3D reserved, = 32<BR>units<BR><BR>Tuple #2,=20 code =3D 0x1c (Other conditions for common memory), length =3D=20 4<BR><BR> 000: 01 00 00=20 ff<BR><BR> = (MWAIT)<BR><BR>Tuple #3,=20 code =3D 0x15 (Version 1 info), length =3D 48<BR><BR> = 000: =20 05 00 4e 6f 20 57 69 72 65 73 20 4e 65 65 64 = 65<BR><BR> =20 010: 64 00 31 31 20 4d 62 70 73 20 57 69 72 65 6c=20 65<BR><BR> 020: 73 73 20 4c 41 4e 20 50 43 20 43 = 61 72=20 64 00 ff<BR><BR> Version =3D = 5.0, Manuf=20 =3D [No Wires Needed], card vers =3D [11 Mbps<BR>Wireless<BR><BR>LAN PC=20 Card]<BR><BR>Tuple #4, code =3D 0x20 (Manufacturer ID), length =3D=20 4<BR><BR> 000: 02 06 03=20 00<BR><BR> PCMCIA ID =3D = 0x602, OEM ID =3D=20 0x3<BR><BR>Tuple #5, code =3D 0x1a (Configuration map), length =3D=20 5<BR><BR> 000: 01 30 00 01=20 07<BR><BR> Reg len =3D 2, = config=20 register addr =3D 0x100, last config =3D=20 0x30<BR><BR> Registers: = XXX-----=20 <BR><BR>Tuple #6, code =3D 0x1b (Configuration entry), length =3D=20 19<BR><BR> 000: f0 81 9d 76 b5 1e 55 36 56 55 e8 = 14 2f=20 46 30 ff<BR><BR> 010: ff 28=20 00<BR><BR> Config index =3D=20 0x30(default)<BR><BR> = Interface byte =3D=20 0x81 (I/O) wait signal=20 supported<BR><BR> Vcc=20 pwr:<BR><BR> &= nbsp; =20 Minimum operating supply voltage: 3 x 1V, ext =3D=20 0x1e<BR><BR> &= nbsp; =20 Maximum operating supply voltage: 5 x=20 1V<BR><BR> &nb= sp; =20 Max current average over 1 second: 3 x=20 100mA<BR><BR> = =20 Max current average over 10 ms: 5 x=20 100mA<BR><BR> = =20 Power down supply current: 5 x=20 10mA<BR><BR> Wait scale Speed = =3D 1.2 x=20 10 us<BR><BR> RDY/BSY scale = Speed =3D=20 2.0 x 10 ms, scaled by = 100<BR><BR> =20 Card decodes 6 address lines, limited 8/16 Bit=20 I/O<BR><BR> &n= bsp; =20 IRQ modes:=20 Level<BR><BR> = =20 IRQs: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14=20 15<BR><BR> Max twin cards =3D=20 0<BR><BR> Misc attr: = (Audio-BVD2)=20 (Power down supported)<BR><BR>Tuple #7, code =3D 0x21 (Functional ID), = length =3D=20 2<BR><BR> 000: 06=20 00<BR><BR> Network/LAN=20 adapter<BR><BR>Tuple #8, code =3D 0x22 (Functional EXT), length =3D=20 2<BR><BR> 000: 01=20 07<BR><BR> Network technology: = Wireless<BR><BR>Tuple #9, code =3D 0x22 (Functional EXT), length =3D=20 5<BR><BR> 000: 02 c0 d8 a7=20 00<BR><BR> Network speed: 11=20 Mb/sec<BR><BR>Tuple #10, code =3D 0x22 (Functional EXT), length =3D=20 2<BR><BR> 000: 03=20 07<BR><BR> Network media: 2.4=20 GHz<BR><BR>Tuple #11, code =3D 0x14 (No link), length =3D 0<BR><BR>Tuple = #12, code =3D=20 0xff (Terminator), length =3D 0<BR><BR>Code 136 not found<BR><BR>Code = 136 not=20 found<BR><BR>code Unknown ignored<BR><BR>Configuration data for card in = slot=20 1<BR><BR>[blabla...]<BR></DIV> <DIV><FONT face=3DArial size=3D2></FONT> </DIV> <DIV><FONT face=3DArial size=3D2></FONT> </DIV> <DIV><FONT face=3DArial size=3D2></FONT><BR><BR>Could ne1 give me a clue = ?<BR>Thanks=20 in advance.<BR><BR>Cheers,<BR>Tom</DIV> <DIV><FONT face=3DArial size=3D2></FONT> </DIV></BODY></HTML> ------=_NextPart_000_0014_01C19531.C0AFB000-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?001701c19529$5f94f580$aa1ba182>