Date: Tue, 22 Mar 2011 17:02:53 +1000 From: Da Rock <freebsd-questions@herveybayaustralia.com.au> To: freebsd-questions@freebsd.org Subject: Re: Kodak C195 digital camera appears to affect WD on usb Message-ID: <4D88499D.2000408@herveybayaustralia.com.au> In-Reply-To: <201103220226.22277.FreeBSD@insightbb.com> References: <201103220226.22277.FreeBSD@insightbb.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On 03/22/11 16:26, Steven Friedrich wrote: > I know you'll think I'm crazy, but I'm pretty sure I've only started seeing > these errors since plugging in this camera. > > Mar 22 01:06:22 laptop2 kernel: umass0:<Western Digital My Book, class 0/0, > rev 2.00/1.75, addr 2> on usbus4 > Mar 22 01:06:22 laptop2 kernel: Root mount waiting for: usbus4 > Mar 22 01:06:22 laptop2 kernel: da0 at umass-sim0 bus 0 scbus0 target 0 lun 0 > Mar 22 01:06:22 laptop2 kernel: da0:<WD 5000AAV External 1.75> Fixed Direct > Access SCSI-4 device > Mar 22 01:06:22 laptop2 kernel: da0: 40.000MB/s transfers > Mar 22 01:06:22 laptop2 kernel: da0: 476940MB (976773168 512 byte sectors: > 255H 63S/T 60801C) > > > Mar 22 01:10:24 laptop2 root: Unknown USB device: vendor 0x040a product 0x0600 > bus uhub2 > Mar 22 01:10:24 laptop2 kernel: ugen2.2:<Eastman Kodak Company> at usbus2 > Mar 22 01:10:24 laptop2 kernel: umass1:<Eastman Kodak Company KODAK EASYSHARE > C195 Digital Camera, class 0/0, rev 1.10/1.00, addr 2> on usbus2 > Mar 22 01:10:26 laptop2 kernel: (probe0:umass-sim1:1:0:0): TEST UNIT READY. > CDB: 0 0 0 0 0 0 > Mar 22 01:10:26 laptop2 kernel: (probe0:umass-sim1:1:0:0): CAM status: SCSI > Status Error > Mar 22 01:10:26 laptop2 kernel: (probe0:umass-sim1:1:0:0): SCSI status: Check > Condition > Mar 22 01:10:26 laptop2 kernel: (probe0:umass-sim1:1:0:0): SCSI sense: NOT > READY asc:3a,2 (Medium not present - tray open) > Mar 22 01:11:32 laptop2 wpa_supplicant[413]: CTRL-EVENT-SCAN-RESULTS > Mar 22 01:12:06 laptop2 login: 2 LOGIN FAILURES ON ttyv0 > Mar 22 01:12:09 laptop2 login: ROOT LOGIN (root) ON ttyv0 > > > Mar 22 01:12:19 laptop2 kernel: ugen2.2:<Eastman Kodak Company> at usbus2 > (disconnected) > Mar 22 01:12:19 laptop2 kernel: umass1: at uhub2, port 1, addr 2 > (disconnected) > > I believe these next two were caused by the camera on umass-sim1 > > Mar 22 01:12:21 laptop2 kernel: (da0:umass-sim0:0:0:0): AutoSense failed > Mar 22 01:12:21 laptop2 kernel: g_vfs_done():da0s1f[WRITE(offset=5780930560, > length=16384)]error = 5 > > Here's a little config info: > > dmesg when plugging in camera > > ugen2.2:<Eastman Kodak Company> at usbus2 > umass1:<Eastman Kodak Company KODAK EASYSHARE C195 Digital Camera, class 0/0, > rev 1.10/1.00, addr 2> on usbus2 > (probe0:umass-sim1:1:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 > (probe0:umass-sim1:1:0:0): CAM status: SCSI Status Error > (probe0:umass-sim1:1:0:0): SCSI status: Check Condition > (probe0:umass-sim1:1:0:0): SCSI sense: NOT READY asc:3a,2 (Medium not present > - tray open) > > usbconfig > ugen0.1:<UHCI root HUB Intel> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) > pwr=SAVE > ugen1.1:<UHCI root HUB Intel> at usbus1, cfg=0 md=HOST spd=FULL (12Mbps) > pwr=SAVE > ugen2.1:<UHCI root HUB Intel> at usbus2, cfg=0 md=HOST spd=FULL (12Mbps) > pwr=SAVE > ugen3.1:<UHCI root HUB Intel> at usbus3, cfg=0 md=HOST spd=FULL (12Mbps) > pwr=SAVE > ugen4.1:<EHCI root HUB Intel> at usbus4, cfg=0 md=HOST spd=HIGH (480Mbps) > pwr=SAVE > ugen4.2:<My Book Western Digital> at usbus4, cfg=0 md=HOST spd=HIGH (480Mbps) > pwr=ON > ugen3.2:<USB Receiver Logitech> at usbus3, cfg=0 md=HOST spd=LOW (1.5Mbps) > pwr=ON > ugen2.2:<KODAK EASYSHARE C195 Digital Camera Eastman Kodak Company> at > usbus2, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON > It appears to be a routine attempt to determine a usb device by devd. Assuming you are trying to access the camera, are you able to mount it? > > > > ----------------------------------------------------------------------------------------------------- > System Name: laptop2.StevenFriedrich.org > Window Manager(s): kde4-4.5.5_1 > X Window System: xorg-7.5.1 X.Org X Server 1.7.7 > OS version: FreeBSD 8.2-RELEASE i386 (5.2 MB kernel) > Platform: HP pavilion zd8000 (zd8215us) > CPU: 2.80GHz Intel Pentium 4 (HTT) with 2 GB memory > > ----------------------------------------------------------------------------------------------------- > FreeBSD Audio Driver (newpcm: 32bit 2009061500/i386) > Installed devices: > pcm0:<Intel ICH6 (82801FB)> (play/rec) default > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4D88499D.2000408>