Date: Wed, 15 Nov 2000 06:19:34 +0000 (GMT) From: visi0n <visi0n@aux-tech.org> To: freebsd-hackers@freebsd.org Subject: libexec directory error ? Message-ID: <Pine.BSF.4.21.0011140801190.163-100000@anthrax.chinatown.org>
next in thread | raw e-mail | index | archive | help
I've a box with FreeBSD 4.1 installed and when I ls -l /usr I saw
something weird...
anthrax# ls -la
total 35
drwxr-xr-x 18 root wheel 512 Oct 17 02:55 .
drwxr-xr-x 15 root wheel 512 Oct 8 02:23 ..
drwxr-xr-x 3 root wheel 512 Oct 10 19:06 X11R6
drwxr-xr-x 3 root wheel 512 Oct 8 02:37 aux
drwxr-xr-x 2 root wheel 6656 Oct 8 02:21 bin
drwxr-xr-x 2 root wheel 512 Oct 8 02:22 compat
drwxr-xr-x 2 root wheel 512 Oct 24 08:22 downloads
drwxr-xr-x 3 root wheel 512 Oct 8 02:23 home
drwxr-xr-x 35 root wheel 3072 Oct 8 02:21 include
drwxr-xr-x 4 root wheel 5632 Jul 28 14:44 lib
drwxr-xr-x 9 root wheel 512 Oct 8 02:19 libdata
drwxr-xr-x 8 root wheel 2199023257088 Oct 8 02:22 libexec
drwxr-xr-x 11 root wheel 512 Oct 8 02:25 local
drwxr-xr-x 2 root wheel 512 Oct 8 02:22 obj
drwxr-xr-x 2 root wheel 4096 Oct 8 02:21 sbin
drwxr-xr-x 25 root wheel 512 Oct 8 02:22 share
drwxr-xr-x 5 root wheel 512 Oct 8 02:21 src
drwxrwxrwt 2 root wheel 512 Oct 28 22:35 tmp
anthrax#
this is a default installation and I didnt change anything in the
configuration even the kernel. My dmesg follows.
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.1-RELEASE #0: Fri Jul 28 14:30:31 GMT 2000
jkh@ref4.freebsd.org:/usr/src/sys/compile/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD-K6(tm) 3D processor (451.03-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x58c Stepping = 12
Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX>
AMD Features=0x80000800<SYSCALL,3DNow!>
real memory = 134152192 (131008K bytes)
config> di lnc0
config> di le0
config> di ie0
config> di fe0
config> di cs0
config> di bt0
config> di aic0
config> di aha0
config> di adv0
config> en sn0
config> po sn0 0x220
config> ir sn0 11
config> f sn0 0
config> en ed0
config> po ed0 0x260
config> ir ed0 9
config> iom ed0 0xd8000
config> f ed0 0
config> q
avail memory = 126341120 (123380K bytes)
Preloaded elf kernel "kernel" at 0xc040d000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc040d09c.
K6-family MTRR support enabled (2 registers)
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib2: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 on
pci0
pci1: <PCI bus> on pcib2
isab0: <VIA 82C586 PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C586 ATA33 controller> port 0xe000-0xe00f at device 7.1 on
pci0
ata0: at 0x1f0 irq 14 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xe400-0xe41f irq 11 at device 7.2
on p$usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub0: port 1 power on failed, IOERROR
uhub0: port 2 power on failed, IOERROR
wb0: <Winbond W89C840F 10/100BaseTX> port 0xe800-0xe87f mem
0xd1400000-0xd14000$wb0: Ethernet address: 00:40:c7:a6:11:ee
miibus0: <MII bus> on wb0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib1: <Host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib1
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
vga0: <Generic ISA VGA> at port 0x3d0-0x3db iomem 0xb8000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: CGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
plip0: <PLIP network interface> on ppbus0
ad0: 516MB <QUANTUM MAVERICK 540A> [1049/16/63] at ata0-master using PIO3
===============================================================================
visi0n
AUX Technologies
[www.aux-tech.org]
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hackers" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0011140801190.163-100000>