Date: Fri, 13 Mar 1998 19:41:39 -0800 (PST) From: Doug White <dwhite@gdi.uoregon.edu> To: "Joe \"Marcus\" Clarke" <marcus@miami.edu> Cc: FreeBSD User Questions List <freebsd-questions@FreeBSD.ORG> Subject: Re: Dialin Message-ID: <Pine.BSF.3.96.980313194058.19404c-100000@gdi.uoregon.edu> In-Reply-To: <Pine.OSF.3.96.980313174041.9082A-100000@jaguar.ir.miami.edu>
next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, 13 Mar 1998, Joe "Marcus" Clarke wrote: > I'm trying to setup dialin on a FreeBSD 2.2.5 machine. I've read the > handbook etry on this a bunch of times, and done everything it's told me > to do for a matching speed config. I can connect to the modem fine, but > I only get garbage. I have a Sierra Data/Fax modem (33.6), and I'm > using > > ttyd2 "/usr/libexec/getty 57600-baud" dialup on > > as my ttys line. My modem is set to disable echo, disable status > messages, drop DTR on exit, RTS/CTS, no XON/XOFF, pickup in one ring, > disable escape sequence (S2=128), and assert DCD on connect. Is there > something I'm missing (i'm leaning toward a speed conflict)? Any help > would be most appreciated. Below is the Hayes-compatible string I use > to initialize my modem (this is verified via tip): Make sure the settings for ttyd2 are set properly; use /etc/rc.serial if necessary. Make sure you modify /dev/ttydi2 to set the initial state. Doug White | University of Oregon Internet: dwhite@resnet.uoregon.edu | Residence Networking Assistant http://gladstone.uoregon.edu/~dwhite | Computer Science Major To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.96.980313194058.19404c-100000>