Date: Sat, 07 Mar 1998 21:01:39 -0800 From: Michael Vlasov <mvlasov@microdin.ru> To: freebsd-questions@FreeBSD.ORG Subject: Hello ! Message-ID: <35022633.3B47@microdin.ru>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format. --------------17F321D54CF1 Content-Type: text/plain; charset=koi8-r Content-Transfer-Encoding: 7bit Hello ! My name is Michael Vlasov. I am want get help from you. My personal workstations PC have a dial up to ISP but i am do not have routing before connect (in modem the normal work ) The command PING - sea that "d not route to host ...." FreeBSD - it is fune systems best that Linux and Sun Solaris !!! Best Regards Michael Vlasov from Moscow mvlasov@microdin.ru --------------17F321D54CF1 Content-Type: text/plain; charset=koi8-r; name="HELP.!!!" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="HELP.!!!" Help !! I am do not connected to my ISP my ISP - Microdin communications (Best !) his adress - 195.128.73.200 his domen - www.micrrodin.ru his telephone 9951001 My machine have netcard EN200 - adress 192.168.1.1 In kernel options PPP = YES When i am connected My ISp I am do not route to all host in the Internet. Command PING do not work - write that "Do not route HOST" Please call me what it is command ADD and options SET IFADDR And please send me samples ! Best Regards , Michael Vlasov --------------17F321D54CF1 Content-Type: text/plain; charset=koi8-r; name="GETTYTAB" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="GETTYTAB" # from: @(#)gettytab 5.14 (Berkeley) 3/27/91 # # Most of the table entries here are just copies of the old getty table, # it is by no means certain, or even likely, that any of them are optimal # for any purpose whatever. Nor is it likely that more than a couple are # even correct. # # The default gettytab entry, used to set defaults for all other # entries, and in cases where getty is called with no table name. # # cb, ce and ck are desirable on most crt's. The non-crt entries need to # be changed to turn them off (:cb@:ce@:ck@:). # # lc should always be on; it's a remainder of some stone age when there # have been terminals around not being able of handling lower-case # characters. Those terminals aren't supported any longer, but getty is # `smart' about them by default. # # Parity defaults to even, but the Pc entry and all the `std' entries # specify no parity. The different parities are: # (none): same as even except -inpck instead of inpck for login. # ep: getty will use raw mode (cs8 -parenb) (unless rw is set) and # fake parity. login will use even parity (cs7 parenb -parodd). # op: same as ep except odd parity (cs7 parenb parodd) for login. # op overrides ep. # ap: same as ep except -inpck instead of inpck for login. # ap overrides op and ep. # np: 1. don't fake parity in getty. The fake parity garbles # characters on non-terminals (like pccons) that don't # support parity. It would probably better for getty not to # try to fake parity. It could just use cbreak mode so as # not to force cs8 and let the hardware handle the parity. # login has to be rely on the hardware anyway. # 2. set PASS8, giving cs8 -parenb -istrip -inpck. # np:ep: same as np except inpck. # np:op: same as np:ep except for parodd (but parodd is overridden). # np:ap: same as np except istrip. # default:\ :cb:ce:ck:lc:fd#1000:im=\r\n FreeBSD (%h) (%t)\r\n\r\n:\ :sp#1200: # # Fixed speed entries # # The "std.NNN" names are known to the special case # portselector code in getty, however they can # be assigned to any table desired. # The "NNN-baud" names are known to the special case # autobaud code in getty, and likewise can # be assigned to any table desired (hopefully the same speed). # a|std.110|110-baud:\ :np:nd#1:cd#1:uc:sp#110: b|std.134|134.5-baud:\ :np:nd#1:cd#2:ff#1:td#1:sp#134:ht:nl: 1|std.150|150-baud:\ :np:nd#1:cd#2:td#1:fd#1:sp#150:ht:nl:lm=\E\72\6\6\17login\72 : c|std.300|300-baud:\ :np:nd#1:cd#1:sp#300: d|std.600|600-baud:\ :np:nd#1:cd#1:sp#600: f|std.1200|1200-baud:\ :np:fd#1:sp#1200: 6|std.2400|2400-baud:\ :np:sp#2400: 7|std.4800|4800-baud:\ :np:sp#4800: 2|std.9600|9600-baud:\ :np:sp#9600: g|std.19200|19200-baud:\ :np:sp#19200: std.38400|38400-baud:\ :np:sp#38400:pp=/usr/local/bin/ppplogin.sh std.57600|57600-baud:\ :np:sp#57600:pp=/usr/local/bin/ppplogin.sh std.115200|115200-baud:\ :np:sp#115200:pp=/usr/local/bin/ppplogin.sh # # Dial in rotary tables, speed selection via 'break' # 0|d300|Dial-300:\ :nx=d1200:cd#2:sp#300: d1200|Dial-1200:\ :nx=d150:fd#1:sp#1200: d150|Dial-150:\ :nx=d110:lm@:tc=150-baud: d110|Dial-110:\ :nx=d300:tc=300-baud: # # Fast dialup terminals, 2400/1200/300 rotary (can start either way) # D2400|d2400|Fast-Dial-2400:\ :nx=D1200:tc=2400-baud: 3|D1200|Fast-Dial-1200:\ :nx=D300:tc=1200-baud: 5|D300|Fast-Dial-300:\ :nx=D2400:tc=300-baud: # #telebit (19200) # t19200:\ :nx=t2400:tc=19200-baud: t2400:\ :nx=t1200:tc=2400-baud: t1200:\ :nx=t19200:tc=1200-baud: # #telebit (9600) # t9600:\ :nx=t2400a:tc=9600-baud: t2400a:\ :nx=t1200a:tc=2400-baud: t1200a:\ :nx=t9600:tc=1200-baud: # # Odd special case terminals # -|tty33|asr33|Pity the poor user of this beast:\ :tc=110-baud: 4|Console|Console Decwriter II:\ :nd@:cd@:rw:tc=300-baud: e|Console-1200|Console Decwriter III:\ :fd@:nd@:cd@:rw:tc=1200-baud: i|Interdata console:\ :uc:sp#0: l|lsi chess terminal:\ :sp#300: X|Xwindow|X window system:\ :fd@:nd@:cd@:rw:sp#9600: P|Pc|Pc console:\ :ht:np:sp#115200: # # Wierdo special case for fast crt's with hardcopy devices # 8|T9600|CRT with hardcopy:\ :nx=T300:tc=9600-baud: 9|T300|CRT with hardcopy (300):\ :nx=T9600:tc=300-baud: # # Plugboard, and misc other terminals # plug-9600|Plugboard-9600:\ :pf#1:tc=9600-baud: p|P9600|Plugboard-9600-rotary:\ :pf#1:nx=P300:tc=9600-baud: q|P300|Plugboard-300:\ :pf#1:nx=P1200:tc=300-baud: r|P1200|Plugboard-1200:\ :pf#1:nx=P9600:tc=1200-baud: # # XXXX Port selector # s|DSW|Port Selector:\ :ps:sp#2400: # # Auto-baud speed detect entry for Micom 600. # Special code in getty will switch this out # to one of the NNN-baud entries. # A|Auto-baud:\ :ab:sp#2400:f0#040: --------------17F321D54CF1 Content-Type: text/plain; charset=koi8-r; name="HOST~1.CON" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="HOST~1.CON" # $Id: host.conf,v 1.2 1993/11/07 01:02:57 wollman Exp $ # Default is to use the nameserver first bind # If that doesn't work, then try the /etc/hosts file hosts # If you have YP/NIS configured, uncomment the next line # nis --------------17F321D54CF1 Content-Type: text/plain; charset=koi8-r; name="HOSTNAME" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="HOSTNAME" home --------------17F321D54CF1 Content-Type: text/plain; charset=koi8-r; name="HOSTS" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="HOSTS" 127.0.0.1 localhost.holtex.ru localhost --------------17F321D54CF1 Content-Type: text/plain; charset=koi8-r; name="HOSTS~1.CON" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="HOSTS~1.CON" 127.0.0.1 localhost 10.0.0.1 home.holtex.ru home --------------17F321D54CF1 Content-Type: text/plain; charset=koi8-r; name="OPTIONS" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="OPTIONS" modem crtscts defaultroute asyncmap 0 mtu 1500 dns1 195.128.73.200 debug --------------17F321D54CF1 Content-Type: text/plain; charset=koi8-r; name="PPP~1.CON" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="PPP~1.CON" default: set device /dev/cuaa0 set speed 38400 set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \"\" ATE1Q0 OK-AT-OK \\dATDP\\T TIMEOUT 50 CONNECT" provider: set phone 9951001 set authname my_login set authkey my_password set login "TIMEOUT 5 login:-\\r-login: \\U word: \\P PPP" set timeout 400 deny lqr set ifaddr 10.0.0.1/0 delete ALL add 0 0 195.128.73.200 dial --------------17F321D54CF1 Content-Type: text/plain; charset=koi8-r; name="RESOLV~1.CON" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="RESOLV~1.CON" nameserver 195.128.73.200 domain microdin.ru domain holtex.ru --------------17F321D54CF1-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?35022633.3B47>