Date: Fri, 7 Apr 2000 01:31:08 -0400 From: Ray Kohler <ray@rjk191.rh.psu.edu> To: Nate Puri <natepuri@office.ompages.com> Cc: freebsd-questions@freebsd.org Subject: Re: ES1370 and 4.0 Message-ID: <20000407013108.A8511@rjk191.rh.psu.edu> In-Reply-To: <20000406220439.A2467@workstation.ompages.com>; from natepuri@office.ompages.com on Thu, Apr 06, 2000 at 10:04:39PM -0700 References: <20000406220439.A2467@workstation.ompages.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, Apr 06, 2000 at 10:04:39PM -0700, Nate Puri wrote: > > what kernel config options to I put to make my es1370 work? I also have an > on board yamaha oplsax as well; I can't seem to get either to work, and I've > tried many configs; any ideas? > > here's what I have now and it didn't work... > > device pcm This is what I use, and it runs my 1370 just fine. Look at the boot messages; was it detected? Possibly it is working, but the volume is too low. Try running '/usr/sbin/mixer vol 50 pcm 50 cd 50' and seeing whether you can hear it now. Adjust the numbers to your liking and stick the proper combination into /etc/rc.local so it will run on boot-up. -- Ray Kohler <rjk191@psu.edu> FreeBSD -- The Power to Serve Parallel lines never meet, unless you bend one or both of them. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20000407013108.A8511>