Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 22 Oct 2005 23:01:21 -0500
From:      Eric Schuele <e.schuele@computer.org>
To:        Eric Schuele <e.schuele@computer.org>
Cc:        Shelby Westman <shelby.westman@gmail.com>, freebsd-questions@freebsd.org
Subject:   Re: ntpd problems
Message-ID:  <435B0B11.3070002@computer.org>
In-Reply-To: <435AFC41.7020101@computer.org>
References:  <4efe47610510220854n2bff8c1el585d03a3a7d08c89@mail.gmail.com> <435AFC41.7020101@computer.org>

next in thread | previous in thread | raw e-mail | index | archive | help
Eric Schuele wrote:
> Shelby Westman wrote:
> 
>> Hello, all,
>>
>> I am a relatively new freeBSD user. The problem I describe below 
>> happens on
>> both a 5.4 install and a 6.0 RC1 install.
>>
>> Right after installing the OS, I enable ntpd in rc.conf, and setup a 
>> simple
> 
> 
> Are you intending on running an NTP daemon?  Or are you just trying to 
> sync your clock with an NTP source?  If the later, try adding the 
> following to your rc.conf:
> 
> ntpdate_enable="YES"
> ntpdate_flags="<your_fav_ntp_server_here>"

FWIW... after checking the man pages, I think ntpdate is being 
deprecated some time in the near future.

ntpd should be used.  So here is what I now have in my rc.conf:

ntpd_enable="YES"
ntpd_flags="-q"

/etc/ntp.conf contains exactly one line:

server north-america.pool.ntp.org

Works fine.

Also... another thought.  You might try disabling IPv6 unless you need 
it. (remove 'options INET6' from kernconf)

> 
> HTH.
> 
>> config file in /etc/ntp.conf. When I reboot, I get this message:
>>
>> Oct 22 10:40:57 alter ntpd[392]: ntpd 4.2.0-a Sun Oct 9 18:33:33 UTC 2005
>> (1)
>> Oct 22 10:40:57 alter ntpd[392]: bind() fd 6, family 28, port 123, addr
>> fe80:1::202:55ff:fe58:2957, in6_is_addr_multicast=0 flags=0 fails: Can't
>> assign requested address
>>
>> Then ntpd does not synchronize the time. I set the clock manually (using
>> date) five minutes ahead to check and in fact it does not get adjusted.
>>
>> I have tried all sorts of things. I tried assigning numeric addresses 
>> rather
>> than host names in the config file. I tried enabling ipv6 in sysinstall.
>> This machine does have a good route to the internet - I can use 
>> nslookup to
>> resolve host names, so I know the networking is working.
>>
>> Below I have quoted the ntp.conf. The log file is empty - nothing is 
>> being
>> written there.
>>
>> Does anyone have any ideas? I am stumped... thanks for your help.
>>
>> Shelby
>>
>> __________________
>>
>> config file as it stands now...
>>
>> logfile /var/log/ntpd.log
>>
>> # deny-by-default policy
>> restrict default ignore
>>
>> #server -4 ntp-2.ece.cmu.edu <http://ntp-2.ece.cmu.edu>;
>> #server -4 ticker.cis.sac.accd.edu <http://ticker.cis.sac.accd.edu>;
>> #server -4 lain.ziaspace.com <http://lain.ziaspace.com>;
>> #server -4 ntp1.linuxmedialabs.com <http://ntp1.linuxmedialabs.com>;
>> server 17.254.0.31 <http://17.254.0.31>;
>>
>> driftfile /var/spool/ntp.drift
>> _______________________________________________
>> freebsd-questions@freebsd.org mailing list
>> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
>> To unsubscribe, send any mail to 
>> "freebsd-questions-unsubscribe@freebsd.org"
>>
> 
> 


-- 
Regards,
Eric



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?435B0B11.3070002>