Date: Mon, 07 Nov 2005 17:05:45 +0800 From: Ganbold <ganbold@micom.mng.net> To: freebsd-net@freebsd.org Cc: glebius@FreeBSD.org Subject: mpd as pppoe server problem Message-ID: <6.2.1.2.2.20051107165813.03b3deb0@202.179.0.80>
next in thread | raw e-mail | index | archive | help
Hi,
I'm trying to configure mpd as a pppoe server in FreeBSD 5.3. However ADSL
user can't log in to pppoe server.
Nothing happens on mpd console.
MX# mpd -f mpd.conf
Multi-link PPP for FreeBSD, by Archie L. Cobbs.
Based on iij-ppp, by Toshiharu OHNO.
mpd: pid 20841, version 3.18 (root@mx 10:43 7-Nov-2005)
[PPPoE] ppp node is "mpd20841-PPPoE"
[PPPoE] using interface ng0
mpd: accept encryption: not applicable
[PPPoE] the max MTU on type "pppoe" links is 1492
[PPPoE] exec: /sbin/ifconfig rl0 up
[PPPoE:PPPoE] [PPPoE] PPPoE server listening on rl0: for service "*"
Here is is my mpd.conf:
default:
load pppoe
pppoe:
new -i ng0 PPPoE PPPoE
set bundle no multilink
set bundle enable compression
set bundle accept encryption
set bundle max-logins 1
set bundle enable radius-acct
set bundle enable radius-auth
set iface idle 0
set iface disable on-demand
set iface disable proxy-arp
set iface enable tcpmssfix
set iface mtu 1500
set iface route default
set link type pppoe
set link mtu 1500
set link no pap chap
set link enable pap chap
set link keep-alive 60 180
set link max-redial -1
set link mtu 1492
set link latency 1
set ccp yes mpp-e40
set ccp yes mpp-e128
set ccp yes mpp-stateless
set pppoe iface rl0
set pppoe service "*"
set pppoe disable originate
set pppoe enable incoming
set ipcp ranges 192.168.5.50/32 192.168.5.128/32
set ipcp dns x.x.x.x
set ipcp yes vjcomp
set ipcp no vjcomp
set radius server x.x.x.x 1812 1813
set radius timeout 10
set radius config /etc/ppp/radius.conf
set radius retries 3
What am I missing on above config? How can I debug mpd ? Because I don't
see any logs coming.
thanks in advance,
Ganbold
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?6.2.1.2.2.20051107165813.03b3deb0>