Date: Mon, 11 Oct 2004 00:25:13 +0200 From: =?ISO-8859-1?Q?Samuel_Mo=F1ux?= <smonux@gmail.com> To: freebsd-acpi@freebsd.org Subject: Re: Network doesn't work with acpi enabled Message-ID: <b052d0d04101015256ffa985a@mail.gmail.com> In-Reply-To: <4169698C.90700@root.org> References: <b052d0d04101003257d92d178@mail.gmail.com> <4169698C.90700@root.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, 10 Oct 2004 09:55:40 -0700, Nate Lawson <nate@root.org> wrote:
> Samuel Mo=F1ux wrote:
> > I have recently installed 5.3-Beta7 on a box with a Jetway
> > motherboard. When acpi is enabled, network doesn't work and console
> > output shows this message
> > xl0: watchdog timeout
> >
> > When its disabled, it seems to work fine. This box was running
> > 5.1-Release some time ago without problems.
> >
> > I don't know anything about ACPI so I hardly can do anything to fix
> > it. Any help will be appreciated.
> >
> > (This could be the same problem that is reported as i386/72215)
> >
> > -- dmesg output (ACPI enabled):
> >
> > acpi0: <JETWAY AWRDACPI> on motherboard
> > acpi0: Power Button (fixed)
>=20
> Ok, it's getting bad -- I'm starting to recognize OEM BIOS reference
> code by its behavior.
>=20
> > xl0: <3Com 3c900B-TPO Etherlink XL> port 0xec00-0xec7f mem
> > 0xd9000000-0xd900007f irq 5 at device
> > 15.0 on pci0
> > xl0: selecting 10baseT transceiver, half duplex
> > xl0: Ethernet address: 00:04:76:db:19:9f
>=20
> A dmesg from boot -v with acpi disabled and enabled would help. The irq
> routing stuff is hidden there.
>=20
> -Nate
>=20
I forgot to mention that the motherboard is a Jetway 993AN/993AS.
- verbose dmesg with acpi
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
=09The Regents of the University of California. All rights reserved.
FreeBSD 5.3-BETA7 #0: Sat Oct 2 21:01:00 UTC 2004
root@wv1u.samsco.home:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a0d000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a0d200.
Calibrating clock(s) ... i8254 clock: 1193281 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 800033259 Hz
CPU: Intel Pentium III (800.03-MHz 686-class CPU)
Origin =3D "GenuineIntel" Id =3D 0x686 Stepping =3D 6
Features=3D0x387f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,=
CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory =3D 402587648 (383 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c29000 - 0x00000000178fffff, 382562304 bytes (93399 pages)
avail memory =3D 384266240 (366 MB)
bios32: Found BIOS32 Service Directory header at 0xc00fac20
bios32: Entry =3D 0xfb0a0 (c00fb0a0) Rev =3D 0 Len =3D 1
pcibios: PCI BIOS entry at 0xf0000+0xb0d0
pnpbios: Found PnP BIOS data at 0xc00fbd40
pnpbios: Entry =3D f0000:bd68 Rev =3D 1.0
Other BIOS signatures found:
wlan: <802.11 Link Layer>
random: <entropy source, Software, Yarrow>
io: <I/O>
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <JETWAY AWRDACPI> on motherboard
acpi0: [MPSAFE]
pci_open(1):=09mode 1 addr port (0x0cf8) is 0x80000060
pci_open(1a):=09mode1res=3D0x80000000 (0x80000000)
pci_cfgcheck:=09device 0 [class=3D060000] [hdr=3D00] is there (id=3D0691110=
6)
pcibios: BIOS version 2.10
Found $PIR table, 7 entries at 0xc00fdb70
PCI-Only Interrupts: 5 10 11
Location Bus Device Pin Link IRQs
slot 1 0 9 A 0x01 3 4 5 7 9 10 11 12 14 15
slot 1 0 9 B 0x02 3 4 5 7 9 10 11 12 14 15
slot 1 0 9 C 0x03 3 4 5 7 9 10 11 12 14 15
slot 1 0 9 D 0x05 3 4 5 7 9 10 11 12 14 15
slot 2 0 11 A 0x02 3 4 5 7 9 10 11 12 14 15
slot 2 0 11 B 0x03 3 4 5 7 9 10 11 12 14 15
slot 2 0 11 C 0x05 3 4 5 7 9 10 11 12 14 15
slot 2 0 11 D 0x01 3 4 5 7 9 10 11 12 14 15
slot 3 0 13 A 0x03 3 4 5 7 9 10 11 12 14 15
slot 3 0 13 B 0x05 3 4 5 7 9 10 11 12 14 15
slot 3 0 13 C 0x01 3 4 5 7 9 10 11 12 14 15
slot 3 0 13 D 0x02 3 4 5 7 9 10 11 12 14 15
slot 4 0 15 A 0x03 3 4 5 7 9 10 11 12 14 15
slot 4 0 15 B 0x05 3 4 5 7 9 10 11 12 14 15
slot 4 0 15 C 0x01 3 4 5 7 9 10 11 12 14 15
slot 4 0 15 D 0x02 3 4 5 7 9 10 11 12 14 15
slot 5 0 17 A 0x05 3 4 5 7 9 10 11 12 14 15
slot 5 0 17 B 0x01 3 4 5 7 9 10 11 12 14 15
slot 5 0 17 C 0x02 3 4 5 7 9 10 11 12 14 15
slot 5 0 17 D 0x03 3 4 5 7 9 10 11 12 14 15
embedded 0 1 A 0x01 3 4 5 7 9 10 11 12 14 15
embedded 0 1 B 0x02 3 4 5 7 9 10 11 12 14 15
embedded 0 1 C 0x03 3 4 5 7 9 10 11 12 14 15
embedded 0 1 D 0x05 3 4 5 7 9 10 11 12 14 15
embedded 0 7 C 0x03 3 4 5 7 9 10 11 12 14 15
embedded 0 7 D 0x05 3 4 5 7 9 10 11 12 14 15
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 7 func 0
acpi0: Power Button (fixed)
ACPI timer looks BAD min =3D 1, max =3D 4, width =3D 3
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 1
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 1
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 1
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 1
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 1
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 1
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 1
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 1
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 1
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU (3 Cx states)> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port
0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on acpi0
ACPI PCI link initial configuration:
\\_SB_.PCI0.LNKA irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 11+
low,level,sharable 0.9.0
\\_SB_.PCI0.LNKB irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 0+
low,level,sharable 0.9.1
\\_SB_.PCI0.LNKC irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 5+
low,level,sharable 0.9.2
\\_SB_.PCI0.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 10+
low,level,sharable 0.9.3
\\_SB_.PCI0.LNKB irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 0+
low,level,sharable 0.11.0
\\_SB_.PCI0.LNKC irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 5+
low,level,sharable 0.11.1
\\_SB_.PCI0.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 10+
low,level,sharable 0.11.2
\\_SB_.PCI0.LNKA irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 11+
low,level,sharable 0.11.3
\\_SB_.PCI0.LNKC irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 5+
low,level,sharable 0.13.0
\\_SB_.PCI0.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 10+
low,level,sharable 0.13.1
\\_SB_.PCI0.LNKA irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 11+
low,level,sharable 0.13.2
\\_SB_.PCI0.LNKB irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 0+
low,level,sharable 0.13.3
\\_SB_.PCI0.LNKC irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 5+
low,level,sharable 0.15.0
\\_SB_.PCI0.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 10+
low,level,sharable 0.15.1
\\_SB_.PCI0.LNKA irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 11+
low,level,sharable 0.15.2
\\_SB_.PCI0.LNKB irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 0+
low,level,sharable 0.15.3
\\_SB_.PCI0.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 10+
low,level,sharable 0.17.0
\\_SB_.PCI0.LNKA irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 11+
low,level,sharable 0.17.1
\\_SB_.PCI0.LNKB irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 0+
low,level,sharable 0.17.2
\\_SB_.PCI0.LNKC irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 5+
low,level,sharable 0.17.3
\\_SB_.PCI0.LNKA irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 11+
low,level,sharable 0.7.0
\\_SB_.PCI0.LNKB irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 0+
low,level,sharable 0.7.1
\\_SB_.PCI0.LNKC irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 5+
low,level,sharable 0.7.2
\\_SB_.PCI0.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 10+
low,level,sharable 0.7.3
\\_SB_.PCI0.LNKA irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 11+
low,level,sharable 0.1.0
\\_SB_.PCI0.LNKB irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 0+
low,level,sharable 0.1.1
\\_SB_.PCI0.LNKC irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 5+
low,level,sharable 0.1.2
\\_SB_.PCI0.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 10+
low,level,sharable 0.1.3
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=3D0
=09map[10]: type 3, range 32, base d0000000, size 26, enabled
found->=09vendor=3D0x1106, dev=3D0x0691, revid=3D0x44
=09bus=3D0, slot=3D0, func=3D0
=09class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0
=09cmdreg=3D0x0006, statreg=3D0x2210, cachelnsz=3D0 (dwords)
=09lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
found->=09vendor=3D0x1106, dev=3D0x8598, revid=3D0x00
=09bus=3D0, slot=3D1, func=3D0
=09class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0
=09cmdreg=3D0x0007, statreg=3D0x2230, cachelnsz=3D0 (dwords)
=09lattimer=3D0x00 (0 ns), mingnt=3D0x0c (3000 ns), maxlat=3D0x00 (0 ns)
found->=09vendor=3D0x1106, dev=3D0x0596, revid=3D0x23
=09bus=3D0, slot=3D7, func=3D0
=09class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1
=09cmdreg=3D0x0087, statreg=3D0x0200, cachelnsz=3D0 (dwords)
=09lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
=09map[20]: type 4, range 32, base 0000e000, size 4, enabled
found->=09vendor=3D0x1106, dev=3D0x0571, revid=3D0x10
=09bus=3D0, slot=3D7, func=3D1
=09class=3D01-01-8a, hdrtype=3D0x00, mfdev=3D0
=09cmdreg=3D0x0007, statreg=3D0x0290, cachelnsz=3D0 (dwords)
=09lattimer=3D0x20 (960 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
=09powerspec 2 supports D0 D3 current D0
=09map[20]: type 4, range 32, base 0000e400, size 5, enabled
pcib0: matched entry for 0.7.INTD (src \\_SB_.PCI0.LNKD)
pcib0: possible interrupts: 1 3 4 5 6 7 10 11 12 14 15
ACPI PCI link arbitrated settings:
\\_SB_.PCI0.LNKA (references 7, priority 145173):
=09interrupts:=09 11 10 5 12 7 6 4 3 15 =
14 1
=09penalty:=09 280 280 330 5280 5280 5280 5280 5280 50280 502801=
00280
\\_SB_.PCI0.LNKB (references 7, priority 145173):
=09interrupts:=09 11 10 5 12 7 6 4 3 15 =
14 1
=09penalty:=09 280 280 330 5280 5280 5280 5280 5280 50280 502801=
00280
\\_SB_.PCI0.LNKC (references 7, priority 145173):
=09interrupts:=09 11 10 5 12 7 6 4 3 15 =
14 1
=09penalty:=09 280 280 330 5280 5280 5280 5280 5280 50280 502801=
00280
\\_SB_.PCI0.LNKD (references 7, priority 145173):
=09interrupts:=09 11 10 5 12 7 6 4 3 15 =
14 1
=09penalty:=09 280 280 330 5280 5280 5280 5280 5280 50280 502801=
00280
pcib0: slot 7 INTD routed to irq 10 via \\_SB_.PCI0.LNKD
found->=09vendor=3D0x1106, dev=3D0x3038, revid=3D0x11
=09bus=3D0, slot=3D7, func=3D2
=09class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0
=09cmdreg=3D0x0007, statreg=3D0x0210, cachelnsz=3D8 (dwords)
=09lattimer=3D0x20 (960 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
=09intpin=3Dd, irq=3D10
=09powerspec 2 supports D0 D3 current D0
found->=09vendor=3D0x1106, dev=3D0x3050, revid=3D0x30
=09bus=3D0, slot=3D7, func=3D3
=09class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0
=09cmdreg=3D0x0000, statreg=3D0x0280, cachelnsz=3D0 (dwords)
=09lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
=09map[10]: type 4, range 32, base 0000e800, size 6, enabled
pcib0: matched entry for 0.9.INTA (src \\_SB_.PCI0.LNKA)
pcib0: possible interrupts: 1 3 4 5 6 7 10 11 12 14 15
ACPI PCI link arbitrated settings:
\\_SB_.PCI0.LNKA (references 7, priority 147178):
=09interrupts:=09 11 5 10 12 7 6 4 3 15 =
14 1
=09penalty:=09 560 610 630 5560 5560 5560 5560 5560 50560 505601=
00560
\\_SB_.PCI0.LNKB (references 7, priority 147178):
=09interrupts:=09 11 5 10 12 7 6 4 3 15 =
14 1
=09penalty:=09 560 610 630 5560 5560 5560 5560 5560 50560 505601=
00560
\\_SB_.PCI0.LNKC (references 7, priority 147178):
=09interrupts:=09 11 5 10 12 7 6 4 3 15 =
14 1
=09penalty:=09 560 610 630 5560 5560 5560 5560 5560 50560 505601=
00560
pcib0: slot 9 INTA routed to irq 11 via \\_SB_.PCI0.LNKA
found->=09vendor=3D0x1274, dev=3D0x5880, revid=3D0x02
=09bus=3D0, slot=3D9, func=3D0
=09class=3D04-01-00, hdrtype=3D0x00, mfdev=3D0
=09cmdreg=3D0x0005, statreg=3D0x0410, cachelnsz=3D0 (dwords)
=09lattimer=3D0x20 (960 ns), mingnt=3D0x0c (3000 ns), maxlat=3D0x80 (32000 =
ns)
=09intpin=3Da, irq=3D11
=09powerspec 1 supports D0 D2 D3 current D0
=09map[10]: type 4, range 32, base 0000ec00, size 7, enabled
=09map[14]: type 1, range 32, base d9000000, size 7, enabled
pcib0: matched entry for 0.15.INTA (src \\_SB_.PCI0.LNKC)
pcib0: possible interrupts: 1 3 4 5 6 7 10 11 12 14 15
ACPI PCI link arbitrated settings:
\\_SB_.PCI0.LNKB (references 7, priority 149182):
=09interrupts:=09 5 11 10 12 7 6 4 3 15 =
14 1
=09penalty:=09 890 910 910 5840 5840 5840 5840 5840 50840 508401=
00840
\\_SB_.PCI0.LNKC (references 7, priority 149182):
=09interrupts:=09 5 11 10 12 7 6 4 3 15 =
14 1
=09penalty:=09 890 910 910 5840 5840 5840 5840 5840 50840 508401=
00840
pcib0: slot 15 INTA routed to irq 5 via \\_SB_.PCI0.LNKC
found->=09vendor=3D0x10b7, dev=3D0x9004, revid=3D0x04
=09bus=3D0, slot=3D15, func=3D0
=09class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0
=09cmdreg=3D0x0007, statreg=3D0x0210, cachelnsz=3D8 (dwords)
=09lattimer=3D0x20 (960 ns), mingnt=3D0x0a (2500 ns), maxlat=3D0x30 (12000 =
ns)
=09intpin=3Da, irq=3D5
=09powerspec 1 supports D0 D1 D2 D3 current D0
agp0: <VIA 82C691 (Apollo Pro) host to PCI bridge> mem
0xd0000000-0xd3ffffff at device 0.0 on pci0
agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xd0000000
agp0: allocating GATT for aperture of size 256M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xd4000000-0xd5ffffff
pcib1: prefetched decode 0xd6000000-0xd7ffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=3D1
=09map[10]: type 1, range 32, base d4000000, size 24, enabled
pcib1: device (null) requested decoded memory range 0xd4000000-0xd4ffffff
=09map[14]: type 3, range 32, base d6000000, size 25, enabled
pcib1: device (null) requested decoded memory range 0xd6000000-0xd7ffffff
pcib0: matched entry for 0.1.INTA (src \\_SB_.PCI0.LNKA)
pcib0: slot 1 INTA is already routed to irq 11
pcib1: slot 0 INTA is routed to irq 11
found->=09vendor=3D0x10de, dev=3D0x002d, revid=3D0x15
=09bus=3D1, slot=3D0, func=3D0
=09class=3D03-00-00, hdrtype=3D0x00, mfdev=3D0
=09cmdreg=3D0x0007, statreg=3D0x02b0, cachelnsz=3D0 (dwords)
=09lattimer=3D0x20 (960 ns), mingnt=3D0x05 (1250 ns), maxlat=3D0x01 (250 ns=
)
=09intpin=3Da, irq=3D11
=09powerspec 1 supports D0 D3 current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C596B UDMA66 controller> port
0xe000-0xe00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on
pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xe000
ata0: channel #0 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D50
ata0-master: stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata0-slave: stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata0: reset tp2 stat0=3D50 stat1=3D50 devices=3D0x3<ATA_SLAVE,ATA_MASTER>
ata0: [MPSAFE]
ata1: channel #1 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D50
ata1-master: stat=3D0x10 err=3D0x01 lsb=3D0x14 msb=3D0xeb
ata1-slave: stat=3D0x10 err=3D0x01 lsb=3D0x14 msb=3D0xeb
ata1: reset tp2 stat0=3D10 stat1=3D10 devices=3D0xc<ATAPI_SLAVE,ATAPI_MASTE=
R>
ata1: [MPSAFE]
uhci0: <VIA 83C572 USB controller> port 0xe400-0xe41f irq 10 at device
7.2 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xe400
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge, HOST-PCI> at device 7.3 (no driver attached)
pci0: <multimedia, audio> at device 9.0 (no driver attached)
xl0: <3Com 3c900B-TPO Etherlink XL> port 0xec00-0xec7f mem
0xd9000000-0xd900007f irq 5 at device 15.0 on pci0
xl0: Reserved 0x80 bytes for rid 0x14 type 3 at 0xd9000000
xl0: using memory mapped I/O
xl0: media options word: 8
xl0: guessing 10BaseT transceiver
xl0: found 10baseT
xl0: selecting 10baseT transceiver, half duplex
xl0: bpf attached
xl0: Ethernet address: 00:04:76:db:19:9f
xl0: [MPSAFE]
fdc0: <floppy drive controller> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 80
fdc0: [MPSAFE]
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1: irq maps: 0x1 0x9 0x1 0x1
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
unknown: not probed (disabled)
unknown: not probed (disabled)
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
psmcpnp0 irq 12 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0047
psm0: <PS/2 Mouse> flags 0x24 irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model 4D+ Mouse, device ID 8-00, 4 buttons
psm0: config:00000024, flags:00000008, packet size:3
psm0: syncmask:c8, syncbits:00
unknown: not probed (disabled)
unknown: not probed (disabled)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ex_isa_identify()
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
ahc_isa_probe 14: ioport 0xec00 alloc failed
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
fb: new array size 4
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81=20
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96=20
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81=20
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96=20
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81=20
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96=20
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 800033259 Hz quality 800
Timecounters tick every 10.000 msec
lo0: bpf attached
cpu0: set speed to 100.0%
acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0%
ata0-slave: pio=3D0x0c wdma=3D0x22 udma=3D0x45 cable=3D80pin
ata0-master: pio=3D0x0c wdma=3D0x22 udma=3D0x45 cable=3D80pin
ata0-master: setting PIO4 on VIA 82C596B chip
ata0-master: setting UDMA66 on VIA 82C596B chip
ata0-slave: setting PIO4 on VIA 82C596B chip
ata0-slave: setting UDMA66 on VIA 82C596B chip
ad0: <WDC WD200EB-00BHF0/15.15M15> ATA-5 disk at ata0-master
ad0: 19092MB (39102336 sectors), 38792 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA66
ar: FreeBSD check1 failed
ad1: <ST360021A/3.19> ATA-5 disk at ata0-slave
ad1: 57241MB (117231408 sectors), 116301 C, 16 H, 63 S, 512 B
ad1: 16 secs/int, 1 depth queue, UDMA66
ar: FreeBSD check1 failed
ata1-slave: pio=3D0x0c wdma=3D0x22 udma=3D0xffffffff cable=3D40pin
ata1-master: pio=3D0x0c wdma=3D0x22 udma=3D0x42 cable=3D40pin
ata1-master: setting PIO4 on VIA 82C596B chip
ata1-master: setting UDMA33 on VIA 82C596B chip
ata1-slave: setting PIO4 on VIA 82C596B chip
acd0: <ATAPI-CD ROM-DRIVE-50MAX/VER 50NT> CDROM drive at ata1 as master
acd0: read 687KB/s (6875KB/s), 128KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, packet
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
acd1: <PCRW804/2,0> CDRW drive at ata1 as slave
acd1: read 5515KB/s (5515KB/s) write 1377KB/s (1377KB/s), 2048KB buffer, PI=
O4
acd1: Reads: CDR, CDRW, CDDA stream, packet
acd1: Writes: CDR, CDRW, test write
acd1: Audio: play, 2 volume levels
acd1: Mechanism: ejectable tray, unlocked
acd1: Medium: no/blank disc
GEOM: new disk ad0
GEOM: new disk ad1
[0] f:80 typ:11 s(CHS):0/1/1 e(CHS):637/254/63 s:63 l:10249407
[1] f:00 typ:5 s(CHS):638/0/1 e(CHS):1023/254/63 s:10249470 l:28852740
[2] f:00 typ:0 s(CHS):1022/254/63 e(CHS):1022/254/63 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 5247696384 end 5247728639
GEOM: Configure ad0s2, start 5247728640 length 14772602880 end 20020331519
[0] f:00 typ:131 s(CHS):0/1/1 e(CHS):85/254/63 s:63 l:1381527
[1] f:00 typ:5 s(CHS):86/0/1 e(CHS):1023/254/63 s:1381590 l:68372640
[2] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/254/63 s:69754230 l:4747207=
5
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad1s1, start 32256 length 707341824 end 707374079
GEOM: Configure ad1s2, start 707374080 length 35006791680 end 35714165759
GEOM: Configure ad1s3, start 35714165760 length 24305702400 end 60019868159
MBREXT Slice 5 on ad0s2:
[0] f:00 typ:7 s(CHS):638/1/1 e(CHS):1023/254/63 s:63 l:19551042
[1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63 s:19551105 l:9301635
GEOM: Configure ad0s5, start 32256 length 10010133504 end 10010165759
MBREXT Slice 6 on ad0s2:
[0] f:00 typ:131 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:9301572
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s6, start 10010198016 length 4762404864 end 14772602879
MBREXT Slice 5 on ad1s2:
[0] f:00 typ:130 s(CHS):86/1/1 e(CHS):135/254/63 s:63 l:803187
[1] f:00 typ:5 s(CHS):136/0/1 e(CHS):1023/254/63 s:803250 l:23454900
GEOM: Configure ad1s5, start 32256 length 411231744 end 411263999
MBREXT Slice 6 on ad1s2:
[0] f:00 typ:131 s(CHS):136/1/1 e(CHS):1023/254/63 s:63 l:23454837
[1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63 s:24258150 l:25398765
GEOM: Configure ad1s6, start 411296256 length 12008876544 end 12420172799
MBREXT Slice 7 on ad1s2:
[0] f:00 typ:131 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:25398702
[1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63 s:49656915 l:1975995
GEOM: Configure ad1s7, start 12420205056 length 13004135424 end 25424340479
MBREXT Slice 8 on ad1s2:
[0] f:00 typ:131 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:1975932
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad1s8, start 25424372736 length 1011677184 end 26436049919
GEOM: Configure ad1s3a, start 0 length 536870912 end 536870911
GEOM: Configure ad1s3b, start 16777216000 length 419430400 end 17196646399
GEOM: Configure ad1s3c, start 0 length 24305702400 end 24305702399
GEOM: Configure ad1s3d, start 536870912 length 134217728 end 671088639
GEOM: Configure ad1s3e, start 671088640 length 16106127360 end 16777215999
Mounting root from ufs:/dev/ad1s3a
start_init: trying /sbin/init
xl0: watchdog timeout
xl0: watchdog timeout
- verbose dmesg without acpi
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
=09The Regents of the University of California. All rights reserved.
FreeBSD 5.3-BETA7 #0: Sat Oct 2 21:01:00 UTC 2004
root@wv1u.samsco.home:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc09b9000.
Calibrating clock(s) ... i8254 clock: 1193281 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 800033427 Hz
CPU: Intel Pentium III (800.03-MHz 686-class CPU)
Origin =3D "GenuineIntel" Id =3D 0x686 Stepping =3D 6
Features=3D0x387f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,=
CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory =3D 402587648 (383 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c29000 - 0x00000000178fffff, 382562304 bytes (93399 pages)
avail memory =3D 384274432 (366 MB)
bios32: Found BIOS32 Service Directory header at 0xc00fac20
bios32: Entry =3D 0xfb0a0 (c00fb0a0) Rev =3D 0 Len =3D 1
pcibios: PCI BIOS entry at 0xf0000+0xb0d0
pnpbios: Found PnP BIOS data at 0xc00fbd40
pnpbios: Entry =3D f0000:bd68 Rev =3D 1.0
Other BIOS signatures found:
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
io: <I/O>
mem: <memory>
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1):=09mode 1 addr port (0x0cf8) is 0x80000060
pci_open(1a):=09mode1res=3D0x80000000 (0x80000000)
pci_cfgcheck:=09device 0 [class=3D060000] [hdr=3D00] is there (id=3D0691110=
6)
pcibios: BIOS version 2.10
Found $PIR table, 7 entries at 0xc00fdb70
PCI-Only Interrupts: 5 10 11
Location Bus Device Pin Link IRQs
slot 1 0 9 A 0x01 3 4 5 7 9 10 11 12 14 15
slot 1 0 9 B 0x02 3 4 5 7 9 10 11 12 14 15
slot 1 0 9 C 0x03 3 4 5 7 9 10 11 12 14 15
slot 1 0 9 D 0x05 3 4 5 7 9 10 11 12 14 15
slot 2 0 11 A 0x02 3 4 5 7 9 10 11 12 14 15
slot 2 0 11 B 0x03 3 4 5 7 9 10 11 12 14 15
slot 2 0 11 C 0x05 3 4 5 7 9 10 11 12 14 15
slot 2 0 11 D 0x01 3 4 5 7 9 10 11 12 14 15
slot 3 0 13 A 0x03 3 4 5 7 9 10 11 12 14 15
slot 3 0 13 B 0x05 3 4 5 7 9 10 11 12 14 15
slot 3 0 13 C 0x01 3 4 5 7 9 10 11 12 14 15
slot 3 0 13 D 0x02 3 4 5 7 9 10 11 12 14 15
slot 4 0 15 A 0x03 3 4 5 7 9 10 11 12 14 15
slot 4 0 15 B 0x05 3 4 5 7 9 10 11 12 14 15
slot 4 0 15 C 0x01 3 4 5 7 9 10 11 12 14 15
slot 4 0 15 D 0x02 3 4 5 7 9 10 11 12 14 15
slot 5 0 17 A 0x05 3 4 5 7 9 10 11 12 14 15
slot 5 0 17 B 0x01 3 4 5 7 9 10 11 12 14 15
slot 5 0 17 C 0x02 3 4 5 7 9 10 11 12 14 15
slot 5 0 17 D 0x03 3 4 5 7 9 10 11 12 14 15
embedded 0 1 A 0x01 3 4 5 7 9 10 11 12 14 15
embedded 0 1 B 0x02 3 4 5 7 9 10 11 12 14 15
embedded 0 1 C 0x03 3 4 5 7 9 10 11 12 14 15
embedded 0 1 D 0x05 3 4 5 7 9 10 11 12 14 15
embedded 0 7 C 0x03 3 4 5 7 9 10 11 12 14 15
embedded 0 7 D 0x05 3 4 5 7 9 10 11 12 14 15
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 7 Entries> on motherboard
$PIR: Links after initial probe:
Link IRQ Rtd Ref IRQs
0x1 255 N 6 3 4 5 7 9 10 11 12 14 15
0x2 255 N 6 3 4 5 7 9 10 11 12 14 15
0x3 255 N 7 3 4 5 7 9 10 11 12 14 15
0x5 255 N 7 3 4 5 7 9 10 11 12 14 15
$PIR: Found matching pin for 0.9.INTA at func 0: 11
$PIR: Found matching pin for 0.15.INTA at func 0: 5
$PIR: Found matching pin for 0.7.INTD at func 2: 10
$PIR: Links after initial IRQ discovery:
Link IRQ Rtd Ref IRQs
0x1 11 Y 6 3 4 5 7 9 10 11 12 14 15
0x2 255 N 6 3 4 5 7 9 10 11 12 14 15
0x3 5 Y 7 3 4 5 7 9 10 11 12 14 15
0x5 10 Y 7 3 4 5 7 9 10 11 12 14 15
$PIR: IRQs used by BIOS: 5 10 11
$PIR: Interrupt Weights:
[ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ]
[ 0 0 0 0 0 7 0 0 0 0 7 6 0 0 0 0 ]
pci0: <PCI bus> on pcib0
pci0: physical bus=3D0
=09map[10]: type 3, range 32, base d0000000, size 26, enabled
found->=09vendor=3D0x1106, dev=3D0x0691, revid=3D0x44
=09bus=3D0, slot=3D0, func=3D0
=09class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0
=09cmdreg=3D0x0006, statreg=3D0x2210, cachelnsz=3D0 (dwords)
=09lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
found->=09vendor=3D0x1106, dev=3D0x8598, revid=3D0x00
=09bus=3D0, slot=3D1, func=3D0
=09class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0
=09cmdreg=3D0x0007, statreg=3D0x2230, cachelnsz=3D0 (dwords)
=09lattimer=3D0x00 (0 ns), mingnt=3D0x0c (3000 ns), maxlat=3D0x00 (0 ns)
found->=09vendor=3D0x1106, dev=3D0x0596, revid=3D0x23
=09bus=3D0, slot=3D7, func=3D0
=09class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1
=09cmdreg=3D0x0087, statreg=3D0x0200, cachelnsz=3D0 (dwords)
=09lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
=09map[20]: type 4, range 32, base 0000e000, size 4, enabled
found->=09vendor=3D0x1106, dev=3D0x0571, revid=3D0x10
=09bus=3D0, slot=3D7, func=3D1
=09class=3D01-01-8a, hdrtype=3D0x00, mfdev=3D0
=09cmdreg=3D0x0007, statreg=3D0x0290, cachelnsz=3D0 (dwords)
=09lattimer=3D0x20 (960 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
=09powerspec 2 supports D0 D3 current D0
=09map[20]: type 4, range 32, base 0000e400, size 5, enabled
$PIR: 0:7 INTD routed to irq 10
found->=09vendor=3D0x1106, dev=3D0x3038, revid=3D0x11
=09bus=3D0, slot=3D7, func=3D2
=09class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0
=09cmdreg=3D0x0007, statreg=3D0x0210, cachelnsz=3D8 (dwords)
=09lattimer=3D0x20 (960 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
=09intpin=3Dd, irq=3D10
=09powerspec 2 supports D0 D3 current D0
found->=09vendor=3D0x1106, dev=3D0x3050, revid=3D0x30
=09bus=3D0, slot=3D7, func=3D3
=09class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0
=09cmdreg=3D0x0000, statreg=3D0x0280, cachelnsz=3D0 (dwords)
=09lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
=09map[10]: type 4, range 32, base 0000e800, size 6, enabled
$PIR: 0:9 INTA routed to irq 11
found->=09vendor=3D0x1274, dev=3D0x5880, revid=3D0x02
=09bus=3D0, slot=3D9, func=3D0
=09class=3D04-01-00, hdrtype=3D0x00, mfdev=3D0
=09cmdreg=3D0x0005, statreg=3D0x0410, cachelnsz=3D0 (dwords)
=09lattimer=3D0x20 (960 ns), mingnt=3D0x0c (3000 ns), maxlat=3D0x80 (32000 =
ns)
=09intpin=3Da, irq=3D11
=09powerspec 1 supports D0 D2 D3 current D0
=09map[10]: type 4, range 32, base 0000ec00, size 7, enabled
=09map[14]: type 1, range 32, base d9000000, size 7, enabled
$PIR: 0:15 INTA routed to irq 5
found->=09vendor=3D0x10b7, dev=3D0x9004, revid=3D0x04
=09bus=3D0, slot=3D15, func=3D0
=09class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0
=09cmdreg=3D0x0007, statreg=3D0x0210, cachelnsz=3D8 (dwords)
=09lattimer=3D0x20 (960 ns), mingnt=3D0x0a (2500 ns), maxlat=3D0x30 (12000 =
ns)
=09intpin=3Da, irq=3D5
=09powerspec 1 supports D0 D1 D2 D3 current D0
agp0: <VIA 82C691 (Apollo Pro) host to PCI bridge> mem
0xd0000000-0xd3ffffff at device 0.0 on pci0
agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xd0000000
agp0: allocating GATT for aperture of size 256M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xd4000000-0xd5ffffff
pcib1: prefetched decode 0xd6000000-0xd7ffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=3D1
=09map[10]: type 1, range 32, base d4000000, size 24, enabled
pcib1: device (null) requested decoded memory range 0xd4000000-0xd4ffffff
=09map[14]: type 3, range 32, base d6000000, size 25, enabled
pcib1: device (null) requested decoded memory range 0xd6000000-0xd7ffffff
$PIR: 0:1 INTA routed to irq 11
pcib1: slot 0 INTA is routed to irq 11
found->=09vendor=3D0x10de, dev=3D0x002d, revid=3D0x15
=09bus=3D1, slot=3D0, func=3D0
=09class=3D03-00-00, hdrtype=3D0x00, mfdev=3D0
=09cmdreg=3D0x0007, statreg=3D0x02b0, cachelnsz=3D0 (dwords)
=09lattimer=3D0x20 (960 ns), mingnt=3D0x05 (1250 ns), maxlat=3D0x01 (250 ns=
)
=09intpin=3Da, irq=3D11
=09powerspec 1 supports D0 D3 current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C596B UDMA66 controller> port
0xe000-0xe00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on
pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xe000
ata0: channel #0 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D50
ata0-master: stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata0-slave: stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata0: reset tp2 stat0=3D50 stat1=3D50 devices=3D0x3<ATA_SLAVE,ATA_MASTER>
ata0: [MPSAFE]
ata1: channel #1 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D50
ata1-master: stat=3D0x10 err=3D0x01 lsb=3D0x14 msb=3D0xeb
ata1-slave: stat=3D0x10 err=3D0x01 lsb=3D0x14 msb=3D0xeb
ata1: reset tp2 stat0=3D10 stat1=3D10 devices=3D0xc<ATAPI_SLAVE,ATAPI_MASTE=
R>
ata1: [MPSAFE]
uhci0: <VIA 83C572 USB controller> port 0xe400-0xe41f irq 10 at device
7.2 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xe400
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge, HOST-PCI> at device 7.3 (no driver attached)
pci0: <multimedia, audio> at device 9.0 (no driver attached)
xl0: <3Com 3c900B-TPO Etherlink XL> port 0xec00-0xec7f mem
0xd9000000-0xd900007f irq 5 at device 15.0 on pci0
xl0: Reserved 0x80 bytes for rid 0x14 type 3 at 0xd9000000
xl0: using memory mapped I/O
xl0: media options word: 8
xl0: guessing 10BaseT transceiver
xl0: found 10baseT
xl0: selecting 10baseT transceiver, half duplex
xl0: bpf attached
xl0: Ethernet address: 00:04:76:db:19:9f
xl0: [MPSAFE]
cpu0 on motherboard
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ex_isa_identify()
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
pnpbios: 15 devices, largest 98 bytes
PNP0200: adding dma mask 0x10
PNP0200: adding io range 0-0xf, size=3D0x10, align=3D0
PNP0200: adding io range 0x81-0x83, size=3D0x3, align=3D0
PNP0200: adding io range 0x87-0x87, size=3D0x1, align=3D0
PNP0200: adding io range 0x89-0x8b, size=3D0x3, align=3D0
PNP0200: adding io range 0x8f-0x91, size=3D0x3, align=3D0
PNP0200: adding io range 0xc0-0xdf, size=3D0x20, align=3D0
pnpbios: handle 1 device ID PNP0200 (0002d041)
PNP0100: adding irq mask 0x1
PNP0100: adding io range 0x40-0x43, size=3D0x4, align=3D0
pnpbios: handle 2 device ID PNP0100 (0001d041)
PNP0b00: adding irq mask 0x100
PNP0b00: adding io range 0x70-0x71, size=3D0x2, align=3D0
pnpbios: handle 3 device ID PNP0b00 (000bd041)
PNP0303: adding irq mask 0x2
PNP0303: adding io range 0x60-0x60, size=3D0x1, align=3D0
PNP0303: adding io range 0x64-0x64, size=3D0x1, align=3D0
pnpbios: handle 4 device ID PNP0303 (0303d041)
PNP0800: adding io range 0x61-0x61, size=3D0x1, align=3D0
pnpbios: handle 5 device ID PNP0800 (0008d041)
PNP0c04: adding irq mask 0x2000
PNP0c04: adding io range 0xf0-0xff, size=3D0x10, align=3D0
pnpbios: handle 6 device ID PNP0c04 (040cd041)
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=3D0xa0000
PNP0c01: adding fixed memory32 range 0xfffe0000-0xffffffff, size=3D0x20000
PNP0c01: adding fixed memory32 range 0x100000-0x17ffffff, size=3D0x17f00000
pnpbios: handle 7 device ID PNP0c01 (010cd041)
PNP0c02: adding fixed memory32 range 0xf0000-0xf3fff, size=3D0x4000
PNP0c02: adding fixed memory32 range 0xf4000-0xf7fff, size=3D0x4000
PNP0c02: adding fixed memory32 range 0xf8000-0xfbfff, size=3D0x4000
PNP0c02: adding fixed memory32 range 0xfc000-0xfffff, size=3D0x4000
pnpbios: handle 8 device ID PNP0c02 (020cd041)
PNP0a03: adding io range 0x4d0-0x4d1, size=3D0x2, align=3D0
PNP0a03: adding io range 0xcf8-0xcff, size=3D0x8, align=3D0
PNP0a03: adding io range 0x480-0x48f, size=3D0x10, align=3D0
PNP0a03: adding io range 0x4000-0x407f, size=3D0x80, align=3D0
PNP0a03: adding io range 0x4080-0x40ff, size=3D0x80, align=3D0
PNP0a03: adding io range 0x5000-0x501f, size=3D0x20, align=3D0
pnpbios: handle 9 device ID PNP0a03 (030ad041)
PNP0f13: adding irq mask 0x1000
pnpbios: handle 10 device ID PNP0f13 (130fd041)
PNP0501: adding irq mask 0x10
PNP0501: adding io range 0x3f8-0x3ff, size=3D0x8, align=3D0
pnpbios: handle 12 device ID PNP0501 (0105d041)
PNP0700: adding dma mask 0x4
PNP0700: adding io range 0x3f2-0x3f5, size=3D0x4, align=3D0
PNP0700: adding irq mask 0x40
pnpbios: handle 13 device ID PNP0700 (0007d041)
PNP0401: adding dma mask 0x8
PNP0401: adding irq mask 0x80
PNP0401: adding io range 0x378-0x37f, size=3D0x8, align=3D0
PNP0401: adding io range 0x778-0x77b, size=3D0x4, align=3D0
pnpbios: handle 15 device ID PNP0401 (0104d041)
PNP0501: adding irq mask 0x8
PNP0501: adding io range 0x2f8-0x2ff, size=3D0x8, align=3D0
pnpbios: handle 16 device ID PNP0501 (0105d041)
ahc_isa_probe 14: ioport 0xec00 alloc failed
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0047
psm0: <PS/2 Mouse> flags 0x24 irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model 4D+ Mouse, device ID 8-00, 4 buttons
psm0: config:00000024, flags:00000008, packet size:3
psm0: syncmask:c8, syncbits:00
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0: ic_type 90 part_id 80
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: ic_type 90 part_id 80
fdc0: [MPSAFE]
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
fb: new array size 4
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: irq maps: 0x1 0x9 0x1 0x1
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81=20
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96=20
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81=20
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96=20
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81=20
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96=20
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
adv1: Invalid baseport of 0x0 specified. Nearest valid baseport is
0x100. Failing probe.
adv1: Invalid baseport of 0x40 specified. Nearest valid baseport is
0x100. Failing probe.
adv1: Invalid baseport of 0x70 specified. Nearest valid baseport is
0x100. Failing probe.
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0303> at port 0x60 on isa0
adv1: Invalid baseport of 0x61 specified. Nearest valid baseport is
0x100. Failing probe.
unknown: <PNP0800> failed to probe at port 0x61 on isa0
adv1: Invalid baseport of 0xf0 specified. Nearest valid baseport is
0x100. Failing probe.
ahc0: No resources allocated.
ahc0: No resources allocated.
adv1: Invalid baseport of 0x4d0 specified. Nearest valid baseport is
0x330. Failing probe.
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0f13> at irq 12 on isa0
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0700> at port 0x3f2-0x3f5 on isa0
unknown: <PNP0401> can't assign resources (port)
unknown: <PNP0401> at port 0x378-0x37f on isa0
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> at port 0x2f8-0x2ff on isa0
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 800033427 Hz quality 800
Timecounters tick every 10.000 msec
lo0: bpf attached
ata0-slave: pio=3D0x0c wdma=3D0x22 udma=3D0x45 cable=3D80pin
ata0-master: pio=3D0x0c wdma=3D0x22 udma=3D0x45 cable=3D80pin
ata0-master: setting PIO4 on VIA 82C596B chip
ata0-master: setting UDMA66 on VIA 82C596B chip
ata0-slave: setting PIO4 on VIA 82C596B chip
ata0-slave: setting UDMA66 on VIA 82C596B chip
ad0: <WDC WD200EB-00BHF0/15.15M15> ATA-5 disk at ata0-master
ad0: 19092MB (39102336 sectors), 38792 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA66
ar: FreeBSD check1 failed
ad1: <ST360021A/3.19> ATA-5 disk at ata0-slave
ad1: 57241MB (117231408 sectors), 116301 C, 16 H, 63 S, 512 B
ad1: 16 secs/int, 1 depth queue, UDMA66
ar: FreeBSD check1 failed
ata1-slave: pio=3D0x0c wdma=3D0x22 udma=3D0xffffffff cable=3D40pin
ata1-master: pio=3D0x0c wdma=3D0x22 udma=3D0x42 cable=3D40pin
ata1-master: setting PIO4 on VIA 82C596B chip
ata1-master: setting UDMA33 on VIA 82C596B chip
ata1-slave: setting PIO4 on VIA 82C596B chip
acd0: <ATAPI-CD ROM-DRIVE-50MAX/VER 50NT> CDROM drive at ata1 as master
acd0: read 687KB/s (6875KB/s), 128KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, packet
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
acd1: <PCRW804/2,0> CDRW drive at ata1 as slave
acd1: read 5515KB/s (5515KB/s) write 1377KB/s (1377KB/s), 2048KB buffer, PI=
O4
acd1: Reads: CDR, CDRW, CDDA stream, packet
acd1: Writes: CDR, CDRW, test write
acd1: Audio: play, 2 volume levels
acd1: Mechanism: ejectable tray, unlocked
acd1: Medium: no/blank disc
GEOM: new disk ad0
GEOM: new disk ad1
[0] f:80 typ:11 s(CHS):0/1/1 e(CHS):637/254/63 s:63 l:10249407
[1] f:00 typ:5 s(CHS):638/0/1 e(CHS):1023/254/63 s:10249470 l:28852740
[2] f:00 typ:0 s(CHS):1022/254/63 e(CHS):1022/254/63 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 5247696384 end 5247728639
GEOM: Configure ad0s2, start 5247728640 length 14772602880 end 20020331519
[0] f:00 typ:131 s(CHS):0/1/1 e(CHS):85/254/63 s:63 l:1381527
[1] f:00 typ:5 s(CHS):86/0/1 e(CHS):1023/254/63 s:1381590 l:68372640
[2] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/254/63 s:69754230 l:4747207=
5
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad1s1, start 32256 length 707341824 end 707374079
GEOM: Configure ad1s2, start 707374080 length 35006791680 end 35714165759
GEOM: Configure ad1s3, start 35714165760 length 24305702400 end 60019868159
MBREXT Slice 5 on ad0s2:
[0] f:00 typ:7 s(CHS):638/1/1 e(CHS):1023/254/63 s:63 l:19551042
[1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63 s:19551105 l:9301635
GEOM: Configure ad0s5, start 32256 length 10010133504 end 10010165759
MBREXT Slice 6 on ad0s2:
[0] f:00 typ:131 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:9301572
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s6, start 10010198016 length 4762404864 end 14772602879
MBREXT Slice 5 on ad1s2:
[0] f:00 typ:130 s(CHS):86/1/1 e(CHS):135/254/63 s:63 l:803187
[1] f:00 typ:5 s(CHS):136/0/1 e(CHS):1023/254/63 s:803250 l:23454900
GEOM: Configure ad1s5, start 32256 length 411231744 end 411263999
MBREXT Slice 6 on ad1s2:
[0] f:00 typ:131 s(CHS):136/1/1 e(CHS):1023/254/63 s:63 l:23454837
[1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63 s:24258150 l:25398765
GEOM: Configure ad1s6, start 411296256 length 12008876544 end 12420172799
MBREXT Slice 7 on ad1s2:
[0] f:00 typ:131 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:25398702
[1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63 s:49656915 l:1975995
GEOM: Configure ad1s7, start 12420205056 length 13004135424 end 25424340479
MBREXT Slice 8 on ad1s2:
[0] f:00 typ:131 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:1975932
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad1s8, start 25424372736 length 1011677184 end 26436049919
GEOM: Configure ad1s3a, start 0 length 536870912 end 536870911
GEOM: Configure ad1s3b, start 16777216000 length 419430400 end 17196646399
GEOM: Configure ad1s3c, start 0 length 24305702400 end 24305702399
GEOM: Configure ad1s3d, start 536870912 length 134217728 end 671088639
GEOM: Configure ad1s3e, start 671088640 length 16106127360 end 16777215999
Mounting root from ufs:/dev/ad1s3a
start_init: trying /sbin/init
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?b052d0d04101015256ffa985a>