Date: Tue, 28 Jul 1998 17:37:15 -0500 From: Paul Saab <paul@mu.org> To: freebsd-scsi@FreeBSD.ORG Subject: Ultra2 problems w/ CAM 2.2 snap Message-ID: <19980728173715.A25840@mu.org>
next in thread | raw e-mail | index | archive | help
I don't remember if this has been addressed or not but I got a
machine today with an 2940U2W and an Ultra II Drive (Quantum Viking
II). I tried to format the fisk and got the following....
(da1:ahc0:0:1:0): WRITE(10). CDB: 2a 0 0 88 c 6a 0 0 1 0
(da1:ahc0:0:1:0): ILLEGAL REQUEST asc:21,0
(da1:ahc0:0:1:0): Logical block address out of range
attached is the dmesg.
Paul
FreeBSD 2.2CAM-19980716-SNAP #0: Tue Jul 28 16:38:06 GMT 1998
root@XXXXXXXXXXXXXXXXX:/usr/src/sys/compile/LOCAL
CPU: Pentium II (quarter-micron) (398.78-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x651 Stepping=1
Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,<b16>,<b17>,MMX,<b24>>
real memory = 268435456 (262144K bytes)
avail memory = 260763648 (254652K bytes)
Probing for devices on PCI bus 0:
chip0 <generic PCI bridge (vendor=8086 device=7190 subclass=0)> rev 2 on pci0:0:0
chip1 <generic PCI bridge (vendor=8086 device=7191 subclass=4)> rev 2 on pci0:1:0
chip2 <Intel 82371AB PCI-ISA bridge> rev 2 on pci0:7:0
chip3 <Intel 82371AB IDE interface> rev 1 on pci0:7:1
chip4 <Intel 82371AB USB interface> rev 1 int d irq 14 on pci0:7:2
chip5 <Intel 82371AB Power management controller> rev 2 on pci0:7:3
chip6 <generic PCI bridge (vendor=1011 device=0024 subclass=4)> rev 2 on pci0:14:0
xl0 <3Com 3c905B Fast Etherlink XL 10/100BaseTX> rev 0 int a irq 14 on pci0:17:0
xl0: Ethernet address: 00:c0:4f:79:6c:7c
chip7 <generic PCI bridge (vendor=1011 device=0024 subclass=4)> rev 3 on pci0:19:0
Probing for devices on PCI bus 1:
vga0 <VGA-compatible display device> rev 1 int a irq 11 on pci1:0:0
Probing for devices on PCI bus 2:
de0 <Digital 21140A Fast Ethernet> rev 34 int a irq 10 on pci2:4:0
de0: ZNYX ZX34X 21140A [10-100Mb/s] pass 2.2
de0: address 00:c0:95:e0:3c:cc
de1 <Digital 21140A Fast Ethernet> rev 34 int a irq 15 on pci2:5:0
de1: ZNYX ZX34X 21140A [10-100Mb/s] pass 2.2
de1: address 00:c0:95:e0:3c:cd
de2 <Digital 21140A Fast Ethernet> rev 34 int a irq 14 on pci2:6:0
de2: ZNYX ZX34X 21140A [10-100Mb/s] pass 2.2
de2: address 00:c0:95:e0:3c:ce
de3 <Digital 21140A Fast Ethernet> rev 34 int a irq 11 on pci2:7:0
de3: ZNYX ZX34X 21140A [10-100Mb/s] pass 2.2
de3: address 00:c0:95:e0:3c:cf
Probing for devices on PCI bus 3:
ahc0 <Adaptec aic7890/91 Ultra2 SCSI adapter> rev 0 int a irq 15 on pci3:10:0
ahc0: aic7890/91 Wide Channel A, SCSI Id=7, 32/255 SCBs
ahc1 <Adaptec aic7880 Ultra SCSI adapter> rev 1 int a irq 15 on pci3:14:0
ahc1: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: WARNING: video mode switching is only partially supported
sc0: VGA color <16 virtual consoles, flags=0x0>
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
lpt1 not found at 0xffffffff
mse0 not found at 0x23c
psm0 not found at 0x60
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wt0 not found at 0x300
mcd0 not found at 0x300
matcdc0 not found at 0x230
scd0 not found at 0x230
npx0 flags 0x1 on motherboard
npx0: INT 16 interface
xl0: autoneg complete, link status good (half-duplex, 10Mbps)
de3: autosense failed: cable problem?
de2: autosense failed: cable problem?
de1: autosense failed: cable problem?
de0: autosense failed: cable problem?
da1 at ahc0 bus 0 target 1 lun 0
da1: <QUANTUM VIKING II 4.5WLS 3506> Fixed Direct Access SCSI2 device
da1: 40.0MB/s transfers (20.0MHz, offset 31, 16bit), Tagged Queueing Enabled
da1: 4350MB (8910423 512 byte sectors: 255H 63S/T 554C)
cd0 at ahc1 bus 0 target 5 lun 0
cd0: <NEC CD-ROM DRIVE:464 1.05> Removable CD-ROM SCSI2 device
cd0: 20.0MB/s transfers (20.0MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
da0 at ahc0 bus 0 target 0 lun 0
da0: <IBM DCAS-34330W S61A> Fixed Direct Access SCSI2 device
da0: 40.0MB/s transfers (20.0MHz, offset 15, 16bit), Tagged Queueing Enabled
da0: 4134MB (8467200 512 byte sectors: 255H 63S/T 527C)
(da1:ahc0:0:1:0): WRITE(10). CDB: 2a 0 0 88 c 6a 0 0 1 0
(da1:ahc0:0:1:0): ILLEGAL REQUEST asc:21,0
(da1:ahc0:0:1:0): Logical block address out of range
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19980728173715.A25840>