Date: Wed, 30 Aug 2000 16:49:42 -0500 From: "Deakle, Jeff H." <JHDeakle@ener.com> To: "'freebsd-hackers@freebsd.org'" <freebsd-hackers@freebsd.org> Subject: Kernel ? Message-ID: <51F410294EBDD3118F6600805F8B207833B31A@ntmail1.ener.com>
next in thread | raw e-mail | index | archive | help
This message is in MIME format. Since your mail reader does not understand this format, some or all of this message may not be legible. ------_=_NextPart_001_01C012CC.347FC630 Content-Type: text/plain; charset="iso-8859-1" I have an odd thing happening. I have to Kernel config file that are the same except for two lines that are both remarked out. When each is compiled (without debug) one is 2.2meg and the other is over 8 meg. I have included the to files below. I assume there is a hidden character in the file some where. Could someone take a look and see if they can find the problem? The first config is the 8 meg. --------------------------------------------------------------- # # GENERIC -- Generic kernel configuration file for FreeBSD/i386 # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.freebsd.org/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.ORG/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ./LINT configuration file. If you are # in doubt as to the purpose or necessity of a line, check first in LINT. # # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.246 2000/03/09 16:32:55 jlemon Exp $ machine i386 #cpu I386_CPU #cpu I486_CPU cpu I586_CPU cpu I686_CPU ident GENERIC maxusers 32 #makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options INET6 #IPv6 communications protocols options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options MFS #Memory Filesystem options MD_ROOT #MD is a potential root device options NFS #Network Filesystem options NFS_ROOT #NFS usable as root device, NFS required options MSDOSFS #MSDOS Filesystem options CD9660 #ISO 9660 Filesystem options CD9660_ROOT #CD-ROM usable as root, CD9660 required options PROCFS #Process filesystem options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI options UCONSOLE #Allow users to grab the console options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options KTRACE #ktrace(1) support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options P1003_1B #Posix P1003_1B real-time extentions options _KPOSIX_PRIORITY_SCHEDULING options ICMP_BANDLIM #Rate limit bad replies # To make an SMP kernel, the next two are needed options SMP # Symmetric MultiProcessor Kernel options APIC_IO # Symmetric (APIC) I/O # Optionally these may need tweaked, (defaults shown): options NCPU=2 # number of CPUs options NBUS=4 # number of busses options NAPIC=1 # number of IO APICs options NINTR=24 # number of INTs device isa #device eisa device pci # Floppy drives device fdc0 at isa? port IO_FD1 irq 6 drq 2 device fd0 at fdc0 drive 0 #device fd1 at fdc0 drive 1 # ATA and ATAPI devices #device ata0 at isa? port IO_WD1 irq 14 #device ata1 at isa? port IO_WD2 irq 15 #device ata #device atadisk # ATA disk drives #device atapicd # ATAPI CDROM drives #device atapifd # ATAPI floppy drives #device atapist # ATAPI tape drives #options ATA_STATIC_ID #Static device numbering #options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI devices # SCSI Controllers #device ahb # EISA AHA1742 family #device ahc # AHA2940 and onboard AIC7xxx devices #device amd # AMD 53C974 (Teckram DC-390(T)) #device dpt # DPT Smartcache - See LINT for options! #device isp # Qlogic family #device ncr # NCR/Symbios Logic device sym # NCR/Symbios Logic (newer chipsets) #device adv0 at isa? #device adw #device bt0 at isa? #device aha0 at isa? #device aic0 at isa? # SCSI peripherals device scbus # SCSI bus (required) device da # Direct Access (disks) device sa # Sequential Access (tape etc) device cd # CD device pass # Passthrough device (direct SCSI access) # RAID controllers #device ida # Compaq Smart RAID #device amr # AMI MegaRAID #device mlx # Mylex DAC960 family # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc0 at isa? port IO_KBD device atkbd0 at atkbdc? irq 1 device psm0 at atkbdc? irq 12 device vga0 at isa? # splash screen/screen saver pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? #options XSERVER # support for X server on a vt console #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std # Floating point support - do not disable. device npx0 at nexus? port IO_NPX irq 13 # Power management support (see LINT for more options) #device apm0 at nexus? disable flags 0x20 # Advanced Power Management # PCCARD (PCMCIA) support #device card #device pcic0 at isa? irq 10 port 0x3e0 iomem 0xd0000 #device pcic1 at isa? irq 11 port 0x3e2 iomem 0xd4000 disable # Serial (COM) ports device sio0 at isa? port IO_COM1 flags 0x10 irq 4 device sio1 at isa? port IO_COM2 irq 3 #device sio2 at isa? disable port IO_COM3 irq 5 #device sio3 at isa? disable port IO_COM4 irq 9 # Parallel port device ppc0 at isa? irq 7 device ppbus # Parallel port bus (required) device lpt # Printer device plip # TCP/IP over parallel device ppi # Parallel port interface device #device vpo # Requires scbus and da # PCI Ethernet NICs. #device de # DEC/Intel DC21x4x (``Tulip'') device fxp # Intel EtherExpress PRO/100B (82557, 82558) #device tx # SMC 9432TX (83c170 ``EPIC'') #device vx # 3Com 3c590, 3c595 (``Vortex'') #device wx # Intel Gigabit Ethernet Card (``Wiseman'') # PCI Ethernet NICs that use the common MII bus controller code. #device miibus # MII bus support #device dc # DEC/Intel 21143 and various workalikes #device rl # RealTek 8129/8139 #device sf # Adaptec AIC-6915 (``Starfire'') #device sis # Silicon Integrated Systems SiS 900/SiS 7016 #device ste # Sundance ST201 (D-Link DFE-550TX) #device tl # Texas Instruments ThunderLAN #device vr # VIA Rhine, Rhine II #device wb # Winbond W89C840F #device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') # ISA Ethernet NICs. #device ed0 at isa? port 0x280 irq 10 iomem 0xd8000 #device ex #device ep # WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really # exists only as a PCMCIA device, so there is no ISA attatement needed # and resources will always be dynamically assigned by the pccard code. #device wi # Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will # work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP # mode (the factory default). If you set the switches on your ISA # card for a manually chosen I/O address and IRQ, you must specify # those paremeters here. #device an # The probe order of these is presently determined by i386/isa/isa_compat.c. #device ie0 at isa? port 0x300 irq 10 iomem 0xd0000 #device fe0 at isa? port 0x300 #device le0 at isa? port 0x300 irq 5 iomem 0xd0000 #device lnc0 at isa? port 0x280 irq 10 drq 0 #device cs0 at isa? port 0x300 #device sn0 at isa? port 0x300 irq 10 # requires PCCARD (PCMCIA) support to be activated #device xe0 at isa? # Pseudo devices - the number indicates how many units to allocated. pseudo-device loop # Network loopback pseudo-device ether # Ethernet support pseudo-device sl 1 # Kernel SLIP pseudo-device ppp 1 # Kernel PPP pseudo-device tun # Packet tunnel. pseudo-device pty # Pseudo-ttys (telnet etc) pseudo-device md # Memory "disks" pseudo-device gif 4 # IPv6 and IPv4 tunneling pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation) # The `bpf' pseudo-device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! pseudo-device bpf #Berkeley packet filter # USB support #device uhci # UHCI PCI->USB interface #device ohci # OHCI PCI->USB interface #device usb # USB Bus (required) #device ugen # Generic #device uhid # "Human Interface Devices" #device ukbd # Keyboard #device ulpt # Printer #device umass # Disks/Mass storage - Requires scbus and da #device ums # Mouse # USB Ethernet, requires mii #device aue # ADMtek USB ethernet #device cue # CATC USB ethernet #device kue # Kawasaki LSI USB ethernet #device snd0 device pcm --------------------------------------------------------------- --------------------------------------------------------------- # Kernel from Kevin # GENERIC -- Generic kernel configuration file for FreeBSD/i386 # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.freebsd.org/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.ORG/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ./LINT configuration file. If you are # in doubt as to the purpose or necessity of a line, check first in LINT. # # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.246 2000/03/09 16:32:55 jlemon Exp $ machine i386 #cpu I386_CPU #cpu I486_CPU cpu I586_CPU cpu I686_CPU ident CANCRI maxusers 32 #makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options INET6 #IPv6 communications protocols options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options MFS #Memory Filesystem options MD_ROOT #MD is a potential root device options NFS #Network Filesystem options NFS_ROOT #NFS usable as root device, NFS required options MSDOSFS #MSDOS Filesystem options CD9660 #ISO 9660 Filesystem options CD9660_ROOT #CD-ROM usable as root, CD9660 required options PROCFS #Process filesystem options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI options UCONSOLE #Allow users to grab the console options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options KTRACE #ktrace(1) support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options P1003_1B #Posix P1003_1B real-time extentions options _KPOSIX_PRIORITY_SCHEDULING options ICMP_BANDLIM #Rate limit bad replies # To make an SMP kernel, the next two are needed options SMP # Symmetric MultiProcessor Kernel options APIC_IO # Symmetric (APIC) I/O # Optionally these may need tweaked, (defaults shown): options NCPU=2 # number of CPUs options NBUS=4 # number of busses options NAPIC=1 # number of IO APICs options NINTR=24 # number of INTs device isa #device eisa device pci # Floppy drives device fdc0 at isa? port IO_FD1 irq 6 drq 2 device fd0 at fdc0 drive 0 #device fd1 at fdc0 drive 1 # ATA and ATAPI devices #device ata0 at isa? port IO_WD1 irq 14 #device ata1 at isa? port IO_WD2 irq 15 #device ata #device atadisk # ATA disk drives #device atapicd # ATAPI CDROM drives #device atapifd # ATAPI floppy drives #device atapist # ATAPI tape drives #options ATA_STATIC_ID #Static device numbering #options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI devices # SCSI Controllers #device ahb # EISA AHA1742 family #device ahc # AHA2940 and onboard AIC7xxx devices #device amd # AMD 53C974 (Teckram DC-390(T)) #device dpt # DPT Smartcache - See LINT for options! #device isp # Qlogic family #device ncr # NCR/Symbios Logic device sym # NCR/Symbios Logic (newer chipsets) #device adv0 at isa? #device adw #device bt0 at isa? #device aha0 at isa? #device aic0 at isa? # SCSI peripherals device scbus # SCSI bus (required) device da # Direct Access (disks) device sa # Sequential Access (tape etc) device cd # CD device pass # Passthrough device (direct SCSI access) # RAID controllers #device ida # Compaq Smart RAID #device amr # AMI MegaRAID #device mlx # Mylex DAC960 family # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc0 at isa? port IO_KBD device atkbd0 at atkbdc? irq 1 device psm0 at atkbdc? irq 12 device vga0 at isa? # splash screen/screen saver pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? #options XSERVER # support for X server on a vt console #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std # Floating point support - do not disable. device npx0 at nexus? port IO_NPX irq 13 # Power management support (see LINT for more options) #device apm0 at nexus? disable flags 0x20 # Advanced Power Management # PCCARD (PCMCIA) support #device card #device pcic0 at isa? irq 10 port 0x3e0 iomem 0xd0000 #device pcic1 at isa? irq 11 port 0x3e2 iomem 0xd4000 disable # Serial (COM) ports device sio0 at isa? port IO_COM1 flags 0x10 irq 4 device sio1 at isa? port IO_COM2 irq 3 #device sio2 at isa? disable port IO_COM3 irq 5 #device sio3 at isa? disable port IO_COM4 irq 9 # Parallel port device ppc0 at isa? irq 7 device ppbus # Parallel port bus (required) device lpt # Printer device plip # TCP/IP over parallel device ppi # Parallel port interface device #device vpo # Requires scbus and da # PCI Ethernet NICs. #device de # DEC/Intel DC21x4x (``Tulip'') device fxp # Intel EtherExpress PRO/100B (82557, 82558) #device tx # SMC 9432TX (83c170 ``EPIC'') #device vx # 3Com 3c590, 3c595 (``Vortex'') #device wx # Intel Gigabit Ethernet Card (``Wiseman'') # PCI Ethernet NICs that use the common MII bus controller code. #device miibus # MII bus support #device dc # DEC/Intel 21143 and various workalikes #device rl # RealTek 8129/8139 #device sf # Adaptec AIC-6915 (``Starfire'') #device sis # Silicon Integrated Systems SiS 900/SiS 7016 #device ste # Sundance ST201 (D-Link DFE-550TX) #device tl # Texas Instruments ThunderLAN #device vr # VIA Rhine, Rhine II #device wb # Winbond W89C840F #device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') # ISA Ethernet NICs. #device ed0 at isa? port 0x280 irq 10 iomem 0xd8000 #device ex #device ep # WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really # exists only as a PCMCIA device, so there is no ISA attatement needed # and resources will always be dynamically assigned by the pccard code. #device wi # Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will # work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP # mode (the factory default). If you set the switches on your ISA # card for a manually chosen I/O address and IRQ, you must specify # those paremeters here. #device an # The probe order of these is presently determined by i386/isa/isa_compat.c. #device ie0 at isa? port 0x300 irq 10 iomem 0xd0000 #device fe0 at isa? port 0x300 #device le0 at isa? port 0x300 irq 5 iomem 0xd0000 #device lnc0 at isa? port 0x280 irq 10 drq 0 #device cs0 at isa? port 0x300 #device sn0 at isa? port 0x300 irq 10 # requires PCCARD (PCMCIA) support to be activated #device xe0 at isa? # Pseudo devices - the number indicates how many units to allocated. pseudo-device loop # Network loopback pseudo-device ether # Ethernet support pseudo-device sl 1 # Kernel SLIP pseudo-device ppp 1 # Kernel PPP pseudo-device tun # Packet tunnel. pseudo-device pty # Pseudo-ttys (telnet etc) pseudo-device md # Memory "disks" pseudo-device gif 4 # IPv6 and IPv4 tunneling pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation) # The `bpf' pseudo-device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! pseudo-device bpf #Berkeley packet filter # USB support #device uhci # UHCI PCI->USB interface #device ohci # OHCI PCI->USB interface #device usb # USB Bus (required) #device ugen # Generic #device uhid # "Human Interface Devices" #device ukbd # Keyboard #device ulpt # Printer #device umass # Disks/Mass storage - Requires scbus and da #device ums # Mouse # USB Ethernet, requires mii #device aue # ADMtek USB ethernet #device cue # CATC USB ethernet #device kue # Kawasaki LSI USB ethernet #device snd0 #device pcm0 at isa? port ? tty irq 10 drq 1 flags 0x0 device pcm --------------------------------------------------------------------- Thanks for the help. Jeff Deakle Direct = (281)721-4680 Fax = (281)721-4600 ------_=_NextPart_001_01C012CC.347FC630 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN"> <HTML> <HEAD> <META HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; = charset=3Diso-8859-1"> <META NAME=3D"Generator" CONTENT=3D"MS Exchange Server version = 5.5.2650.12"> <TITLE>Kernel ?</TITLE> </HEAD> <BODY> <P><FONT SIZE=3D2>I have an odd thing happening. I have to Kernel = config file that are the same except for two lines that are both = remarked out. </FONT></P> <P><FONT SIZE=3D2>When each is compiled (without debug) one is 2.2meg = and the other is over 8 meg. I have included the to files = below. I assume there is a hidden character in the file some = where. </FONT></P> <P><FONT SIZE=3D2>Could someone take a look and see if they can find = the problem?</FONT> </P> <P><FONT SIZE=3D2>The first config is the 8 meg.</FONT> </P> <BR> <P><FONT = SIZE=3D2>---------------------------------------------------------------= </FONT> <BR><FONT SIZE=3D2>#</FONT> <BR><FONT SIZE=3D2># GENERIC -- Generic kernel configuration file for = FreeBSD/i386</FONT> <BR><FONT SIZE=3D2>#</FONT> <BR><FONT SIZE=3D2># For more information on this file, please read the = handbook section on</FONT> <BR><FONT SIZE=3D2># Kernel Configuration Files:</FONT> <BR><FONT SIZE=3D2>#</FONT> <BR><FONT SIZE=3D2># <A = HREF=3D"http://www.freebsd.org/handbook/kernelconfig-config.html" = TARGET=3D"_blank">http://www.freebsd.org/handbook/kernelconfig-config.ht= ml</A></FONT> <BR><FONT SIZE=3D2>#</FONT> <BR><FONT SIZE=3D2># The handbook is also available locally in = /usr/share/doc/handbook</FONT> <BR><FONT SIZE=3D2># if you've installed the doc distribution, = otherwise always see the</FONT> <BR><FONT SIZE=3D2># FreeBSD World Wide Web server (<A = HREF=3D"http://www.FreeBSD.ORG/" = TARGET=3D"_blank">http://www.FreeBSD.ORG/</A>) for the</FONT> <BR><FONT SIZE=3D2># latest information.</FONT> <BR><FONT SIZE=3D2>#</FONT> <BR><FONT SIZE=3D2># An exhaustive list of options and more detailed = explanations of the</FONT> <BR><FONT SIZE=3D2># device lines is also present in the ./LINT = configuration file. If you are</FONT> <BR><FONT SIZE=3D2># in doubt as to the purpose or necessity of a line, = check first in LINT.</FONT> <BR><FONT SIZE=3D2>#</FONT> <BR><FONT SIZE=3D2># $FreeBSD: src/sys/i386/conf/GENERIC,v 1.246 = 2000/03/09 16:32:55 jlemon Exp $</FONT> </P> <P><FONT SIZE=3D2>machine = i386</FONT> <BR><FONT SIZE=3D2>#cpu = I386_CPU</FONT> <BR><FONT SIZE=3D2>#cpu = I486_CPU</FONT> <BR><FONT SIZE=3D2>cpu = I586_CPU</FONT> <BR><FONT SIZE=3D2>cpu = I686_CPU</FONT> <BR><FONT SIZE=3D2>ident = GENERIC</FONT> <BR><FONT SIZE=3D2>maxusers = 32</FONT> </P> <P><FONT SIZE=3D2>#makeoptions = DEBUG=3D-g = #Build kernel with gdb(1) = debug symbols</FONT> </P> <P><FONT SIZE=3D2>options = MATH_EMULATE = #Support for x87 = emulation</FONT> <BR><FONT SIZE=3D2>options = INET = #InterNETworking</FONT> <BR><FONT SIZE=3D2>options = INET6 = #IPv6 communications = protocols</FONT> <BR><FONT SIZE=3D2>options = FFS = #Berkeley Fast = Filesystem</FONT> <BR><FONT SIZE=3D2>options = FFS_ROOT = #FFS usable as root device = [keep this!]</FONT> <BR><FONT SIZE=3D2>options = MFS = #Memory Filesystem</FONT> <BR><FONT SIZE=3D2>options = MD_ROOT = #MD is a potential root = device</FONT> <BR><FONT SIZE=3D2>options = NFS = #Network Filesystem</FONT> <BR><FONT SIZE=3D2>options = NFS_ROOT = #NFS usable as root device, = NFS required</FONT> <BR><FONT SIZE=3D2>options = MSDOSFS = #MSDOS Filesystem</FONT> <BR><FONT SIZE=3D2>options = CD9660 = #ISO 9660 Filesystem</FONT> <BR><FONT SIZE=3D2>options = CD9660_ROOT = #CD-ROM usable as root, = CD9660 required</FONT> <BR><FONT SIZE=3D2>options = PROCFS = #Process filesystem</FONT> <BR><FONT SIZE=3D2>options = COMPAT_43 = #Compatible with BSD 4.3 = [KEEP THIS!]</FONT> <BR><FONT SIZE=3D2>options = SCSI_DELAY=3D15000 #Delay (in = ms) before probing SCSI</FONT> <BR><FONT SIZE=3D2>options = UCONSOLE = #Allow users to grab the = console</FONT> <BR><FONT SIZE=3D2>options = USERCONFIG = #boot -c editor</FONT> <BR><FONT SIZE=3D2>options = VISUAL_USERCONFIG #visual boot -c = editor</FONT> <BR><FONT SIZE=3D2>options = KTRACE = #ktrace(1) support</FONT> <BR><FONT SIZE=3D2>options = SYSVSHM = #SYSV-style shared = memory</FONT> <BR><FONT SIZE=3D2>options = SYSVMSG = #SYSV-style message = queues</FONT> <BR><FONT SIZE=3D2>options = SYSVSEM = #SYSV-style = semaphores</FONT> <BR><FONT SIZE=3D2>options = P1003_1B = #Posix P1003_1B real-time = extentions</FONT> <BR><FONT SIZE=3D2>options = _KPOSIX_PRIORITY_SCHEDULING</FONT> <BR><FONT SIZE=3D2>options = ICMP_BANDLIM  = ; #Rate limit bad replies</FONT> </P> <P><FONT SIZE=3D2># To make an SMP kernel, the next two are = needed</FONT> <BR><FONT SIZE=3D2>options = SMP = # Symmetric MultiProcessor = Kernel</FONT> <BR><FONT SIZE=3D2>options = APIC_IO = # Symmetric (APIC) = I/O</FONT> <BR><FONT SIZE=3D2># Optionally these may need tweaked, (defaults = shown):</FONT> <BR><FONT SIZE=3D2>options = NCPU=3D2 = # number of CPUs</FONT> <BR><FONT SIZE=3D2>options = NBUS=3D4 = # number of busses</FONT> <BR><FONT SIZE=3D2>options = NAPIC=3D1 = # number of IO APICs</FONT> <BR><FONT SIZE=3D2>options = NINTR=3D24 = # number of INTs</FONT> </P> <P><FONT SIZE=3D2>device = isa</FONT> <BR><FONT SIZE=3D2>#device = eisa</FONT> <BR><FONT SIZE=3D2>device = pci</FONT> </P> <P><FONT SIZE=3D2># Floppy drives</FONT> <BR><FONT SIZE=3D2>device = fdc0 at = isa? port IO_FD1 irq 6 drq 2</FONT> <BR><FONT SIZE=3D2>device = fd0 = at fdc0 drive 0</FONT> <BR><FONT SIZE=3D2>#device = fd1 at fdc0 drive 1</FONT> </P> <P><FONT SIZE=3D2># ATA and ATAPI devices</FONT> <BR><FONT SIZE=3D2>#device = ata0 at isa? port IO_WD1 irq 14</FONT> <BR><FONT SIZE=3D2>#device = ata1 at isa? port IO_WD2 irq 15</FONT> <BR><FONT SIZE=3D2>#device = ata</FONT> <BR><FONT SIZE=3D2>#device = atadisk = # ATA disk drives</FONT> <BR><FONT SIZE=3D2>#device = atapicd = # ATAPI CDROM drives</FONT> <BR><FONT SIZE=3D2>#device = atapifd = # ATAPI floppy drives</FONT> <BR><FONT SIZE=3D2>#device = atapist = # ATAPI tape drives</FONT> <BR><FONT SIZE=3D2>#options = ATA_STATIC_ID = #Static device numbering</FONT> <BR><FONT SIZE=3D2>#options = ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI = devices</FONT> </P> <P><FONT SIZE=3D2># SCSI Controllers</FONT> <BR><FONT SIZE=3D2>#device = ahb = # EISA AHA1742 family</FONT> <BR><FONT SIZE=3D2>#device = ahc = # AHA2940 and onboard AIC7xxx devices</FONT> <BR><FONT SIZE=3D2>#device = amd = # AMD 53C974 (Teckram DC-390(T))</FONT> <BR><FONT SIZE=3D2>#device = dpt = # DPT Smartcache - See LINT for options!</FONT> <BR><FONT SIZE=3D2>#device = isp = # Qlogic family</FONT> <BR><FONT SIZE=3D2>#device = ncr = # NCR/Symbios Logic</FONT> <BR><FONT SIZE=3D2>device = sym = # NCR/Symbios Logic (newer = chipsets)</FONT> </P> <P><FONT SIZE=3D2>#device = adv0 at isa?</FONT> <BR><FONT SIZE=3D2>#device = adw</FONT> <BR><FONT SIZE=3D2>#device = bt0 at isa?</FONT> <BR><FONT SIZE=3D2>#device = aha0 at isa?</FONT> <BR><FONT SIZE=3D2>#device = aic0 at isa?</FONT> </P> <P><FONT SIZE=3D2># SCSI peripherals</FONT> <BR><FONT SIZE=3D2>device = scbus = # SCSI bus (required)</FONT> <BR><FONT SIZE=3D2>device = = da = # Direct Access = (disks)</FONT> <BR><FONT SIZE=3D2>device = = sa = # Sequential Access (tape = etc)</FONT> <BR><FONT SIZE=3D2>device = = cd = # CD</FONT> <BR><FONT SIZE=3D2>device = pass = # Passthrough device (direct = SCSI access)</FONT> </P> <P><FONT SIZE=3D2># RAID controllers</FONT> <BR><FONT SIZE=3D2>#device = ida = # Compaq Smart RAID</FONT> <BR><FONT SIZE=3D2>#device = amr = # AMI MegaRAID</FONT> <BR><FONT SIZE=3D2>#device = mlx = # Mylex DAC960 family</FONT> </P> <P><FONT SIZE=3D2># atkbdc0 controls both the keyboard and the PS/2 = mouse</FONT> <BR><FONT SIZE=3D2>device = atkbdc0 at isa? port = IO_KBD</FONT> <BR><FONT SIZE=3D2>device = atkbd0 at atkbdc? irq = 1</FONT> <BR><FONT SIZE=3D2>device = psm0 at = atkbdc? irq 12</FONT> </P> <P><FONT SIZE=3D2>device = vga0 at = isa?</FONT> </P> <P><FONT SIZE=3D2># splash screen/screen saver</FONT> <BR><FONT SIZE=3D2>pseudo-device splash</FONT> </P> <P><FONT SIZE=3D2># syscons is the default console driver, resembling = an SCO console</FONT> <BR><FONT SIZE=3D2>device = sc0 = at isa?</FONT> </P> <P><FONT SIZE=3D2># Enable this and PCVT_FREEBSD for pcvt vt220 = compatible console driver</FONT> <BR><FONT SIZE=3D2>#device = vt0 at isa?</FONT> <BR><FONT SIZE=3D2>#options = XSERVER = # support for X server on a = vt console</FONT> <BR><FONT SIZE=3D2>#options = FAT_CURSOR = # start with block = cursor</FONT> <BR><FONT SIZE=3D2># If you have a ThinkPAD, uncomment this along with = the rest of the PCVT lines</FONT> <BR><FONT SIZE=3D2>#options = PCVT_SCANSET=3D2 # IBM = keyboards are non-std</FONT> </P> <P><FONT SIZE=3D2># Floating point support - do not disable.</FONT> <BR><FONT SIZE=3D2>device = npx0 at = nexus? port IO_NPX irq 13</FONT> </P> <P><FONT SIZE=3D2># Power management support (see LINT for more = options)</FONT> <BR><FONT SIZE=3D2>#device = apm0 at nexus? disable flags 0x20 # Advanced Power = Management</FONT> </P> <P><FONT SIZE=3D2># PCCARD (PCMCIA) support</FONT> <BR><FONT SIZE=3D2>#device = card</FONT> <BR><FONT SIZE=3D2>#device = pcic0 at isa? irq 10 port 0x3e0 iomem 0xd0000</FONT> <BR><FONT SIZE=3D2>#device = pcic1 at isa? irq 11 port 0x3e2 iomem 0xd4000 = disable</FONT> </P> <P><FONT SIZE=3D2># Serial (COM) ports</FONT> <BR><FONT SIZE=3D2>device = sio0 at = isa? port IO_COM1 flags 0x10 irq 4</FONT> <BR><FONT SIZE=3D2>device = sio1 at = isa? port IO_COM2 irq 3</FONT> <BR><FONT SIZE=3D2>#device = sio2 at isa? disable port IO_COM3 irq 5</FONT> <BR><FONT SIZE=3D2>#device = sio3 at isa? disable port IO_COM4 irq 9</FONT> </P> <P><FONT SIZE=3D2># Parallel port</FONT> <BR><FONT SIZE=3D2>device = ppc0 at = isa? irq 7</FONT> <BR><FONT SIZE=3D2>device = ppbus = # Parallel port bus = (required)</FONT> <BR><FONT SIZE=3D2>device = lpt = # Printer</FONT> <BR><FONT SIZE=3D2>device = plip = # TCP/IP over = parallel</FONT> <BR><FONT SIZE=3D2>device = ppi = # Parallel port interface = device</FONT> <BR><FONT SIZE=3D2>#device = vpo = # Requires scbus and da</FONT> </P> <BR> <P><FONT SIZE=3D2># PCI Ethernet NICs.</FONT> <BR><FONT SIZE=3D2>#device = de = # DEC/Intel DC21x4x = (``Tulip'')</FONT> <BR><FONT SIZE=3D2>device = fxp = # Intel EtherExpress = PRO/100B (82557, 82558)</FONT> <BR><FONT SIZE=3D2>#device = tx = # SMC 9432TX (83c170 = ``EPIC'')</FONT> <BR><FONT SIZE=3D2>#device = vx = # 3Com 3c590, 3c595 = (``Vortex'')</FONT> <BR><FONT SIZE=3D2>#device = wx = # Intel Gigabit Ethernet = Card (``Wiseman'')</FONT> </P> <P><FONT SIZE=3D2># PCI Ethernet NICs that use the common MII bus contro= ller code.</FONT> <BR><FONT SIZE=3D2>#device = miibus # MII bus = support</FONT> <BR><FONT SIZE=3D2>#device = dc = # DEC/Intel 21143 and = various workalikes</FONT> <BR><FONT SIZE=3D2>#device = rl = # RealTek 8129/8139</FONT> <BR><FONT SIZE=3D2>#device = sf = # Adaptec AIC-6915 = (``Starfire'')</FONT> <BR><FONT SIZE=3D2>#device = sis = # Silicon Integrated Systems SiS 900/SiS 7016</FONT> <BR><FONT SIZE=3D2>#device = ste = # Sundance ST201 (D-Link DFE-550TX)</FONT> <BR><FONT SIZE=3D2>#device = tl = # Texas Instruments = ThunderLAN</FONT> <BR><FONT SIZE=3D2>#device = vr = # VIA Rhine, Rhine II</FONT> <BR><FONT SIZE=3D2>#device = wb = # Winbond W89C840F</FONT> <BR><FONT SIZE=3D2>#device = xl = # 3Com 3c90x (``Boomerang'', = ``Cyclone'')</FONT> </P> <P><FONT SIZE=3D2># ISA Ethernet NICs.</FONT> <BR><FONT SIZE=3D2>#device = ed0 at isa? port 0x280 irq 10 iomem = 0xd8000</FONT> <BR><FONT SIZE=3D2>#device = ex</FONT> <BR><FONT SIZE=3D2>#device = ep</FONT> <BR><FONT SIZE=3D2># WaveLAN/IEEE 802.11 wireless NICs. Note: the = WaveLAN/IEEE really</FONT> <BR><FONT SIZE=3D2># exists only as a PCMCIA device, so there is no ISA = attatement needed</FONT> <BR><FONT SIZE=3D2># and resources will always be dynamically assigned = by the pccard code.</FONT> <BR><FONT SIZE=3D2>#device = wi</FONT> <BR><FONT SIZE=3D2># Aironet 4500/4800 802.11 wireless NICs. Note: the = declaration below will</FONT> <BR><FONT SIZE=3D2># work for PCMCIA and PCI cards, as well as ISA = cards set to ISA PnP</FONT> <BR><FONT SIZE=3D2># mode (the factory default). If you set the = switches on your ISA</FONT> <BR><FONT SIZE=3D2># card for a manually chosen I/O address and IRQ, = you must specify</FONT> <BR><FONT SIZE=3D2># those paremeters here.</FONT> <BR><FONT SIZE=3D2>#device = an</FONT> <BR><FONT SIZE=3D2># The probe order of these is presently determined = by i386/isa/isa_compat.c.</FONT> <BR><FONT SIZE=3D2>#device = ie0 at isa? port 0x300 irq 10 iomem = 0xd0000</FONT> <BR><FONT SIZE=3D2>#device = fe0 at isa? port 0x300</FONT> <BR><FONT SIZE=3D2>#device = le0 at isa? port 0x300 irq 5 iomem = 0xd0000</FONT> <BR><FONT SIZE=3D2>#device = lnc0 at isa? port 0x280 irq 10 drq 0</FONT> <BR><FONT SIZE=3D2>#device = cs0 at isa? port 0x300</FONT> <BR><FONT SIZE=3D2>#device = sn0 at isa? port 0x300 irq 10</FONT> <BR><FONT SIZE=3D2># requires PCCARD (PCMCIA) support to be = activated</FONT> <BR><FONT SIZE=3D2>#device = xe0 at isa?</FONT> </P> <P><FONT SIZE=3D2># Pseudo devices - the number indicates how many = units to allocated.</FONT> <BR><FONT SIZE=3D2>pseudo-device loop = # Network loopback</FONT> <BR><FONT SIZE=3D2>pseudo-device ether = # Ethernet support</FONT> <BR><FONT SIZE=3D2>pseudo-device = sl 1 = # Kernel SLIP</FONT> <BR><FONT SIZE=3D2>pseudo-device = ppp 1 # = Kernel PPP</FONT> <BR><FONT SIZE=3D2>pseudo-device = tun = # Packet tunnel.</FONT> <BR><FONT SIZE=3D2>pseudo-device = pty = # Pseudo-ttys (telnet etc)</FONT> <BR><FONT SIZE=3D2>pseudo-device = md = # Memory = "disks"</FONT> <BR><FONT SIZE=3D2>pseudo-device = gif 4 # = IPv6 and IPv4 tunneling</FONT> <BR><FONT SIZE=3D2>pseudo-device faith = 1 # IPv6-to-IPv4 relaying = (translation)</FONT> </P> <P><FONT SIZE=3D2># The `bpf' pseudo-device enables the Berkeley Packet = Filter.</FONT> <BR><FONT SIZE=3D2># Be aware of the administrative consequences of = enabling this!</FONT> <BR><FONT SIZE=3D2>pseudo-device = bpf = #Berkeley packet filter</FONT> </P> <P><FONT SIZE=3D2># USB support</FONT> <BR><FONT SIZE=3D2>#device = uhci # = UHCI PCI->USB interface</FONT> <BR><FONT SIZE=3D2>#device = ohci # = OHCI PCI->USB interface</FONT> <BR><FONT SIZE=3D2>#device = usb = # USB Bus (required)</FONT> <BR><FONT SIZE=3D2>#device = ugen # = Generic</FONT> <BR><FONT SIZE=3D2>#device = uhid # = "Human Interface Devices"</FONT> <BR><FONT SIZE=3D2>#device = ukbd # = Keyboard</FONT> <BR><FONT SIZE=3D2>#device = ulpt # = Printer</FONT> <BR><FONT SIZE=3D2>#device = umass # = Disks/Mass storage - Requires scbus and da</FONT> <BR><FONT SIZE=3D2>#device = ums = # Mouse</FONT> <BR><FONT SIZE=3D2># USB Ethernet, requires mii</FONT> <BR><FONT SIZE=3D2>#device = aue = # ADMtek USB ethernet</FONT> <BR><FONT SIZE=3D2>#device = cue = # CATC USB ethernet</FONT> <BR><FONT SIZE=3D2>#device = kue = # Kawasaki LSI USB ethernet</FONT> </P> <P><FONT SIZE=3D2>#device snd0</FONT> <BR><FONT SIZE=3D2>device pcm</FONT> </P> <P><FONT = SIZE=3D2>---------------------------------------------------------------= </FONT> <BR><FONT = SIZE=3D2>---------------------------------------------------------------= </FONT> <BR><FONT SIZE=3D2># Kernel from Kevin</FONT> <BR><FONT SIZE=3D2># GENERIC -- Generic kernel configuration file for = FreeBSD/i386</FONT> <BR><FONT SIZE=3D2>#</FONT> <BR><FONT SIZE=3D2># For more information on this file, please read the = handbook section on</FONT> <BR><FONT SIZE=3D2># Kernel Configuration Files:</FONT> <BR><FONT SIZE=3D2>#</FONT> <BR><FONT SIZE=3D2># <A = HREF=3D"http://www.freebsd.org/handbook/kernelconfig-config.html" = TARGET=3D"_blank">http://www.freebsd.org/handbook/kernelconfig-config.ht= ml</A></FONT> <BR><FONT SIZE=3D2>#</FONT> <BR><FONT SIZE=3D2># The handbook is also available locally in = /usr/share/doc/handbook</FONT> <BR><FONT SIZE=3D2># if you've installed the doc distribution, = otherwise always see the</FONT> <BR><FONT SIZE=3D2># FreeBSD World Wide Web server (<A = HREF=3D"http://www.FreeBSD.ORG/" = TARGET=3D"_blank">http://www.FreeBSD.ORG/</A>) for the</FONT> <BR><FONT SIZE=3D2># latest information.</FONT> <BR><FONT SIZE=3D2>#</FONT> <BR><FONT SIZE=3D2># An exhaustive list of options and more detailed = explanations of the</FONT> <BR><FONT SIZE=3D2># device lines is also present in the ./LINT = configuration file. If you are</FONT> <BR><FONT SIZE=3D2># in doubt as to the purpose or necessity of a line, = check first in LINT.</FONT> <BR><FONT SIZE=3D2>#</FONT> <BR><FONT SIZE=3D2># $FreeBSD: src/sys/i386/conf/GENERIC,v 1.246 = 2000/03/09 16:32:55 jlemon Exp $</FONT> </P> <P><FONT SIZE=3D2>machine = i386</FONT> <BR><FONT SIZE=3D2>#cpu = I386_CPU</FONT> <BR><FONT SIZE=3D2>#cpu = I486_CPU</FONT> <BR><FONT SIZE=3D2>cpu = I586_CPU</FONT> <BR><FONT SIZE=3D2>cpu = I686_CPU</FONT> <BR><FONT SIZE=3D2>ident = CANCRI</FONT> <BR><FONT SIZE=3D2>maxusers = 32</FONT> </P> <P><FONT SIZE=3D2>#makeoptions = DEBUG=3D-g = #Build kernel with gdb(1) = debug symbols</FONT> </P> <P><FONT SIZE=3D2>options = MATH_EMULATE = #Support for x87 = emulation</FONT> <BR><FONT SIZE=3D2>options = INET = #InterNETworking</FONT> <BR><FONT SIZE=3D2>options = INET6 = #IPv6 communications = protocols</FONT> <BR><FONT SIZE=3D2>options = FFS = #Berkeley Fast = Filesystem</FONT> <BR><FONT SIZE=3D2>options = FFS_ROOT = #FFS usable as root device = [keep this!]</FONT> <BR><FONT SIZE=3D2>options = MFS = #Memory Filesystem</FONT> <BR><FONT SIZE=3D2>options = MD_ROOT = #MD is a potential root = device</FONT> <BR><FONT SIZE=3D2>options = NFS = #Network Filesystem</FONT> <BR><FONT SIZE=3D2>options = NFS_ROOT = #NFS usable as root device, = NFS required</FONT> <BR><FONT SIZE=3D2>options = MSDOSFS = #MSDOS Filesystem</FONT> <BR><FONT SIZE=3D2>options = CD9660 = #ISO 9660 Filesystem</FONT> <BR><FONT SIZE=3D2>options = CD9660_ROOT = #CD-ROM usable as root, = CD9660 required</FONT> <BR><FONT SIZE=3D2>options = PROCFS = #Process filesystem</FONT> <BR><FONT SIZE=3D2>options = COMPAT_43 = #Compatible with BSD 4.3 = [KEEP THIS!]</FONT> <BR><FONT SIZE=3D2>options = SCSI_DELAY=3D15000 #Delay (in = ms) before probing SCSI</FONT> <BR><FONT SIZE=3D2>options = UCONSOLE = #Allow users to grab the = console</FONT> <BR><FONT SIZE=3D2>options = USERCONFIG = #boot -c editor</FONT> <BR><FONT SIZE=3D2>options = VISUAL_USERCONFIG #visual boot -c = editor</FONT> <BR><FONT SIZE=3D2>options = KTRACE = #ktrace(1) support</FONT> <BR><FONT SIZE=3D2>options = SYSVSHM = #SYSV-style shared = memory</FONT> <BR><FONT SIZE=3D2>options = SYSVMSG = #SYSV-style message = queues</FONT> <BR><FONT SIZE=3D2>options = SYSVSEM = #SYSV-style = semaphores</FONT> <BR><FONT SIZE=3D2>options = P1003_1B = #Posix P1003_1B real-time = extentions</FONT> <BR><FONT SIZE=3D2>options = _KPOSIX_PRIORITY_SCHEDULING</FONT> <BR><FONT SIZE=3D2>options = ICMP_BANDLIM = #Rate limit bad = replies</FONT> </P> <P><FONT SIZE=3D2># To make an SMP kernel, the next two are = needed</FONT> <BR><FONT SIZE=3D2>options = SMP = # Symmetric MultiProcessor = Kernel</FONT> <BR><FONT SIZE=3D2>options = APIC_IO = # Symmetric (APIC) = I/O</FONT> <BR><FONT SIZE=3D2># Optionally these may need tweaked, (defaults = shown):</FONT> <BR><FONT SIZE=3D2>options = NCPU=3D2 = # number of CPUs</FONT> <BR><FONT SIZE=3D2>options = NBUS=3D4 = # number of busses</FONT> <BR><FONT SIZE=3D2>options = NAPIC=3D1 = # number of IO APICs</FONT> <BR><FONT SIZE=3D2>options = NINTR=3D24 = # number of INTs</FONT> </P> <P><FONT SIZE=3D2>device = isa</FONT> <BR><FONT SIZE=3D2>#device = eisa</FONT> <BR><FONT SIZE=3D2>device = pci</FONT> </P> <P><FONT SIZE=3D2># Floppy drives</FONT> <BR><FONT SIZE=3D2>device = fdc0 at = isa? port IO_FD1 irq 6 drq 2</FONT> <BR><FONT SIZE=3D2>device = fd0 = at fdc0 drive 0</FONT> <BR><FONT SIZE=3D2>#device = fd1 at fdc0 drive 1</FONT> </P> <P><FONT SIZE=3D2># ATA and ATAPI devices</FONT> <BR><FONT SIZE=3D2>#device = ata0 at isa? port IO_WD1 irq 14</FONT> <BR><FONT SIZE=3D2>#device = ata1 at isa? port IO_WD2 irq 15</FONT> <BR><FONT SIZE=3D2>#device = ata</FONT> <BR><FONT SIZE=3D2>#device = atadisk = # ATA disk drives</FONT> <BR><FONT SIZE=3D2>#device = atapicd = # ATAPI CDROM drives</FONT> <BR><FONT SIZE=3D2>#device = atapifd = # ATAPI floppy drives</FONT> <BR><FONT SIZE=3D2>#device = atapist = # ATAPI tape drives</FONT> <BR><FONT SIZE=3D2>#options = ATA_STATIC_ID = #Static device numbering</FONT> <BR><FONT SIZE=3D2>#options = ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI = devices</FONT> </P> <P><FONT SIZE=3D2># SCSI Controllers</FONT> <BR><FONT SIZE=3D2>#device = ahb = # EISA AHA1742 family</FONT> <BR><FONT SIZE=3D2>#device = ahc = # AHA2940 and onboard AIC7xxx devices</FONT> <BR><FONT SIZE=3D2>#device = amd = # AMD 53C974 (Teckram DC-390(T))</FONT> <BR><FONT SIZE=3D2>#device = dpt = # DPT Smartcache - See LINT for options!</FONT> <BR><FONT SIZE=3D2>#device = isp = # Qlogic family</FONT> <BR><FONT SIZE=3D2>#device = ncr = # NCR/Symbios Logic</FONT> <BR><FONT SIZE=3D2>device = sym = # NCR/Symbios Logic (newer = chipsets)</FONT> </P> <P><FONT SIZE=3D2>#device = adv0 at isa?</FONT> <BR><FONT SIZE=3D2>#device = adw</FONT> <BR><FONT SIZE=3D2>#device = bt0 at isa?</FONT> <BR><FONT SIZE=3D2>#device = aha0 at isa?</FONT> <BR><FONT SIZE=3D2>#device = aic0 at isa?</FONT> </P> <P><FONT SIZE=3D2># SCSI peripherals</FONT> <BR><FONT SIZE=3D2>device = scbus = # SCSI bus (required)</FONT> <BR><FONT SIZE=3D2>device = = da = # Direct Access = (disks)</FONT> <BR><FONT SIZE=3D2>device = = sa = # Sequential Access (tape = etc)</FONT> <BR><FONT SIZE=3D2>device = = cd = # CD</FONT> <BR><FONT SIZE=3D2>device = pass = # Passthrough device (direct = SCSI access)</FONT> </P> <P><FONT SIZE=3D2># RAID controllers</FONT> <BR><FONT SIZE=3D2>#device = ida = # Compaq Smart RAID</FONT> <BR><FONT SIZE=3D2>#device = amr = # AMI MegaRAID</FONT> <BR><FONT SIZE=3D2>#device = mlx = # Mylex DAC960 family</FONT> </P> <P><FONT SIZE=3D2># atkbdc0 controls both the keyboard and the PS/2 = mouse</FONT> <BR><FONT SIZE=3D2>device = atkbdc0 at isa? port = IO_KBD</FONT> <BR><FONT SIZE=3D2>device = atkbd0 at atkbdc? irq = 1</FONT> <BR><FONT SIZE=3D2>device = psm0 at = atkbdc? irq 12</FONT> </P> <P><FONT SIZE=3D2>device = vga0 at = isa?</FONT> </P> <P><FONT SIZE=3D2># splash screen/screen saver</FONT> <BR><FONT SIZE=3D2>pseudo-device splash</FONT> </P> <P><FONT SIZE=3D2># syscons is the default console driver, resembling = an SCO console</FONT> <BR><FONT SIZE=3D2>device = sc0 = at isa?</FONT> </P> <P><FONT SIZE=3D2># Enable this and PCVT_FREEBSD for pcvt vt220 = compatible console driver</FONT> <BR><FONT SIZE=3D2>#device = vt0 at isa?</FONT> <BR><FONT SIZE=3D2>#options = XSERVER = # support for X server on a = vt console</FONT> <BR><FONT SIZE=3D2>#options = FAT_CURSOR = # start with block = cursor</FONT> <BR><FONT SIZE=3D2># If you have a ThinkPAD, uncomment this along with = the rest of the PCVT lines</FONT> <BR><FONT SIZE=3D2>#options = PCVT_SCANSET=3D2 # IBM = keyboards are non-std</FONT> </P> <P><FONT SIZE=3D2># Floating point support - do not disable.</FONT> <BR><FONT SIZE=3D2>device = npx0 at = nexus? port IO_NPX irq 13</FONT> </P> <P><FONT SIZE=3D2># Power management support (see LINT for more = options)</FONT> <BR><FONT SIZE=3D2>#device = apm0 at nexus? disable flags 0x20 # Advanced Power = Management</FONT> </P> <P><FONT SIZE=3D2># PCCARD (PCMCIA) support</FONT> <BR><FONT SIZE=3D2>#device = card</FONT> <BR><FONT SIZE=3D2>#device = pcic0 at isa? irq 10 port 0x3e0 iomem 0xd0000</FONT> <BR><FONT SIZE=3D2>#device = pcic1 at isa? irq 11 port 0x3e2 iomem 0xd4000 = disable</FONT> </P> <P><FONT SIZE=3D2># Serial (COM) ports</FONT> <BR><FONT SIZE=3D2>device = sio0 at = isa? port IO_COM1 flags 0x10 irq 4</FONT> <BR><FONT SIZE=3D2>device = sio1 at = isa? port IO_COM2 irq 3</FONT> <BR><FONT SIZE=3D2>#device = sio2 at isa? disable port IO_COM3 irq 5</FONT> <BR><FONT SIZE=3D2>#device = sio3 at isa? disable port IO_COM4 irq 9</FONT> </P> <P><FONT SIZE=3D2># Parallel port</FONT> <BR><FONT SIZE=3D2>device = ppc0 at = isa? irq 7</FONT> <BR><FONT SIZE=3D2>device = ppbus = # Parallel port bus = (required)</FONT> <BR><FONT SIZE=3D2>device = lpt = # Printer</FONT> <BR><FONT SIZE=3D2>device = plip = # TCP/IP over = parallel</FONT> <BR><FONT SIZE=3D2>device = ppi = # Parallel port interface = device</FONT> <BR><FONT SIZE=3D2>#device = vpo = # Requires scbus and da</FONT> </P> <BR> <P><FONT SIZE=3D2># PCI Ethernet NICs.</FONT> <BR><FONT SIZE=3D2>#device = de = # DEC/Intel DC21x4x = (``Tulip'')</FONT> <BR><FONT SIZE=3D2>device = fxp = # Intel EtherExpress = PRO/100B (82557, 82558)</FONT> <BR><FONT SIZE=3D2>#device = tx = # SMC 9432TX (83c170 = ``EPIC'')</FONT> <BR><FONT SIZE=3D2>#device = vx = # 3Com 3c590, 3c595 = (``Vortex'')</FONT> <BR><FONT SIZE=3D2>#device = wx = # Intel Gigabit Ethernet = Card (``Wiseman'')</FONT> </P> <P><FONT SIZE=3D2># PCI Ethernet NICs that use the common MII bus = controller code.</FONT> <BR><FONT SIZE=3D2>#device = miibus # MII bus = support</FONT> <BR><FONT SIZE=3D2>#device = dc = # DEC/Intel 21143 and = various workalikes</FONT> <BR><FONT SIZE=3D2>#device = rl = # RealTek 8129/8139</FONT> <BR><FONT SIZE=3D2>#device = sf = # Adaptec AIC-6915 = (``Starfire'')</FONT> <BR><FONT SIZE=3D2>#device = sis = # Silicon Integrated Systems SiS 900/SiS 7016</FONT> <BR><FONT SIZE=3D2>#device = ste = # Sundance ST201 (D-Link DFE-550TX)</FONT> <BR><FONT SIZE=3D2>#device = tl = # Texas Instruments = ThunderLAN</FONT> <BR><FONT SIZE=3D2>#device = vr = # VIA Rhine, Rhine II</FONT> <BR><FONT SIZE=3D2>#device = wb = # Winbond W89C840F</FONT> <BR><FONT SIZE=3D2>#device = xl = # 3Com 3c90x (``Boomerang'', = ``Cyclone'')</FONT> </P> <P><FONT SIZE=3D2># ISA Ethernet NICs.</FONT> <BR><FONT SIZE=3D2>#device = ed0 at isa? port 0x280 irq 10 iomem = 0xd8000</FONT> <BR><FONT SIZE=3D2>#device = ex</FONT> <BR><FONT SIZE=3D2>#device = ep</FONT> <BR><FONT SIZE=3D2># WaveLAN/IEEE 802.11 wireless NICs. Note: the = WaveLAN/IEEE really</FONT> <BR><FONT SIZE=3D2># exists only as a PCMCIA device, so there is no ISA = attatement needed</FONT> <BR><FONT SIZE=3D2># and resources will always be dynamically assigned = by the pccard code.</FONT> <BR><FONT SIZE=3D2>#device = wi</FONT> <BR><FONT SIZE=3D2># Aironet 4500/4800 802.11 wireless NICs. Note: the = declaration below will</FONT> <BR><FONT SIZE=3D2># work for PCMCIA and PCI cards, as well as ISA = cards set to ISA PnP</FONT> <BR><FONT SIZE=3D2># mode (the factory default). If you set the = switches on your ISA</FONT> <BR><FONT SIZE=3D2># card for a manually chosen I/O address and IRQ, = you must specify</FONT> <BR><FONT SIZE=3D2># those paremeters here.</FONT> <BR><FONT SIZE=3D2>#device = an</FONT> <BR><FONT SIZE=3D2># The probe order of these is presently determined = by i386/isa/isa_compat.c.</FONT> <BR><FONT SIZE=3D2>#device = ie0 at isa? port 0x300 irq 10 iomem = 0xd0000</FONT> <BR><FONT SIZE=3D2>#device = fe0 at isa? port 0x300</FONT> <BR><FONT SIZE=3D2>#device = le0 at isa? port 0x300 irq 5 iomem = 0xd0000</FONT> <BR><FONT SIZE=3D2>#device = lnc0 at isa? port 0x280 irq 10 drq 0</FONT> <BR><FONT SIZE=3D2>#device = cs0 at isa? port 0x300</FONT> <BR><FONT SIZE=3D2>#device = sn0 at isa? port 0x300 irq 10</FONT> <BR><FONT SIZE=3D2># requires PCCARD (PCMCIA) support to be = activated</FONT> <BR><FONT SIZE=3D2>#device = xe0 at isa?</FONT> </P> <P><FONT SIZE=3D2># Pseudo devices - the number indicates how many = units to allocated.</FONT> <BR><FONT SIZE=3D2>pseudo-device loop = # Network loopback</FONT> <BR><FONT SIZE=3D2>pseudo-device ether = # Ethernet support</FONT> <BR><FONT SIZE=3D2>pseudo-device = sl 1 = # Kernel SLIP</FONT> <BR><FONT SIZE=3D2>pseudo-device = ppp 1 # = Kernel PPP</FONT> <BR><FONT SIZE=3D2>pseudo-device = tun = # Packet tunnel.</FONT> <BR><FONT SIZE=3D2>pseudo-device = pty = # Pseudo-ttys (telnet etc)</FONT> <BR><FONT SIZE=3D2>pseudo-device = md = # Memory = "disks"</FONT> <BR><FONT SIZE=3D2>pseudo-device = gif 4 # = IPv6 and IPv4 tunneling</FONT> <BR><FONT SIZE=3D2>pseudo-device faith = 1 # IPv6-to-IPv4 relaying = (translation)</FONT> </P> <P><FONT SIZE=3D2># The `bpf' pseudo-device enables the Berkeley Packet = Filter.</FONT> <BR><FONT SIZE=3D2># Be aware of the administrative consequences of = enabling this!</FONT> <BR><FONT SIZE=3D2>pseudo-device = bpf = #Berkeley packet filter</FONT> </P> <P><FONT SIZE=3D2># USB support</FONT> <BR><FONT SIZE=3D2>#device = uhci # = UHCI PCI->USB interface</FONT> <BR><FONT SIZE=3D2>#device = ohci # = OHCI PCI->USB interface</FONT> <BR><FONT SIZE=3D2>#device = usb = # USB Bus (required)</FONT> <BR><FONT SIZE=3D2>#device = ugen # = Generic</FONT> <BR><FONT SIZE=3D2>#device = uhid # = "Human Interface Devices"</FONT> <BR><FONT SIZE=3D2>#device = ukbd # = Keyboard</FONT> <BR><FONT SIZE=3D2>#device = ulpt # = Printer</FONT> <BR><FONT SIZE=3D2>#device = umass # = Disks/Mass storage - Requires scbus and da</FONT> <BR><FONT SIZE=3D2>#device = ums = # Mouse</FONT> <BR><FONT SIZE=3D2># USB Ethernet, requires mii</FONT> <BR><FONT SIZE=3D2>#device = aue = # ADMtek USB ethernet</FONT> <BR><FONT SIZE=3D2>#device = cue = # CATC USB ethernet</FONT> <BR><FONT SIZE=3D2>#device = kue = # Kawasaki LSI USB ethernet</FONT> </P> <P><FONT SIZE=3D2>#device snd0</FONT> <BR><FONT SIZE=3D2>#device pcm0 at isa? port ? tty irq 10 drq 1 flags = 0x0</FONT> <BR><FONT SIZE=3D2>device pcm</FONT> </P> <P><FONT = SIZE=3D2>---------------------------------------------------------------= ------</FONT> </P> <BR> <BR> <P><FONT SIZE=3D2>Thanks for the help.</FONT> </P> <BR> <P><FONT SIZE=3D2>Jeff Deakle</FONT> </P> <P><FONT SIZE=3D2>Direct =3D (281)721-4680</FONT> <BR><FONT SIZE=3D2>Fax =3D (281)721-4600</FONT> </P> </BODY> </HTML> ------_=_NextPart_001_01C012CC.347FC630-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hackers" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?51F410294EBDD3118F6600805F8B207833B31A>