Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 27 Jan 2008 12:57:27 +0200
From:      Stefan Lambrev <stefan.lambrev@moneybookers.com>
To:        Kris Kennaway <kris@FreeBSD.org>
Cc:        freebsd-hackers@freebsd.org, Ivan Voras <ivoras@freebsd.org>
Subject:   Re: gettimeofday() in hping
Message-ID:  <479C6397.1000101@moneybookers.com>
In-Reply-To: <47988F12.2050303@moneybookers.com>
References:  <4795CC13.7080601@moneybookers.com>	<4795FE54.9090606@moneybookers.com>	<86lk6i0vzk.fsf@ds4.des.no>	<479605E2.6070709@moneybookers.com>	<fn5c7u$i7e$2@ger.gmane.org>	<47964356.6030602@moneybookers.com>	<479647FB.3070909@FreeBSD.org>	<47970EE2.5000400@moneybookers.com>	<fn7evj$smv$1@ger.gmane.org>	<479754E6.1060101@moneybookers.com>	<9bbcef730801230802n5c52832bk60c6afc47be578f4@mail.gmail.com>	<479794DB.4020504@FreeBSD.org>	<47985936.2030705@moneybookers.com> <47986FDE.3030402@FreeBSD.org> <47988F12.2050303@moneybookers.com>

next in thread | previous in thread | raw e-mail | index | archive | help
Greetings,

Stefan Lambrev wrote:
> Greetings,
>
> Kris Kennaway wrote:
>> Stefan Lambrev wrote:
>>
>>>> It is the socket buffer that is filling up.  Either the application 
>>>> is not increasing it to large enough size or the default maximum is 
>>>> too low (Linux may set a larger default).  Try increasing 
>>>> kern.ipc.maxsockbuf and confirming with the source and/or ktrace 
>>>> that it is doing the right setsockopt() call.
>>> Increasing kern.ipc.maxsockbuf doesn't help.
>>>
>>> Actually this is the code that failed and print this error:
>>>
>>>        result = sendto(sockraw, packet, packetsize, 0,
>>>                (struct sockaddr*)&remote, sizeof(remote));
>>>
>>>        if (result == -1 && errno != EINTR && !opt_rand_dest && 
>>> !opt_rand_source) {
>>>                perror("[send_ip] sendto");
>>>
>>> Those are the only references for setsockopt when ktracing:
>>> 3385 hping    CALL  __sysctl(0xbfbfe870,0x6,0,0xbfbfe888,0,0)
>>>  3385 hping    RET   __sysctl 0
>>>  3385 hping    CALL  __sysctl(0xbfbfe870,0x6,0x28305180,0xbfbfe888,0,0)
>>>  3385 hping    RET   __sysctl 0
>>>  3385 hping    CALL  socket(PF_INET,SOCK_DGRAM,IPPROTO_IP)
>>>  3385 hping    RET   socket 3
>>>  3385 hping    CALL  
>>> setsockopt(0x3,SOL_SOCKET,SO_BROADCAST,0xbfbfe884,0x4)
>>>  3385 hping    RET   setsockopt 0
>>>  3385 hping    CALL  connect(0x3,0x8067da0,0x10)
>>>  3385 hping    RET   connect 0
>>>  3385 hping    CALL  getsockname(0x3,0xbfbfe874,0xbfbfe888)
>>>  3385 hping    RET   getsockname 0
>>>  3385 hping    CALL  close(0x3)
>>>  3385 hping    RET   close 0
>>>  3385 hping    CALL  socket(PF_INET,SOCK_RAW,IPPROTO_RAW)
>>>  3385 hping    RET   socket 3
>>>  3385 hping    CALL  
>>> setsockopt(0x3,SOL_SOCKET,SO_BROADCAST,0xbfbfe914,0x4)
>>>  3385 hping    RET   setsockopt 0
>>>  3385 hping    CALL  setsockopt(0x3,0,0x2,0xbfbfe914,0x4)
>>>  3385 hping    RET   setsockopt 0
>>>  3385 hping    CALL  open(0xbfbfe8a4,O_RDWR,<unused>0)
>>>  3385 hping    NAMI  "/dev/bpf0"
>>>  3385 hping    RET   open -1 errno 16 Device busy
>>>  3385 hping    CALL  open(0xbfbfe8a4,O_RDWR,<unused>0)
>>>  3385 hping    NAMI  "/dev/bpf1"
>>>  3385 hping    RET   open 4
>>
>> OK, try adding the setsockopt(...SO_SNDBUF...) call.
> Will something like this do the trick?
>
> void socket_sndbuf(int sd)
> {
>        long int bufsize;
>        bufsize = 65536;
>        if (setsockopt(sd, SOL_SOCKET, SO_SNDBUF,
>                        (char *)&bufsize, sizeof(int)) == -1)
>        {
>                printf("[socket_sndbuf] can't set SO_SNDBUF option\n");
>        }
> }
>
> I'm not a C developer so pardon me if I made something stupid :)
> Also how can I make bufsize = default settings*2 for example?
>
> I tried this code and here is what ktrace show now:
> 65372 hping3   CALL  socket(PF_INET,SOCK_DGRAM,IPPROTO_IP)
> 65372 hping3   RET   socket 3
> 65372 hping3   CALL  
> setsockopt(0x3,SOL_SOCKET,SO_BROADCAST,0xbfbfe844,0x4)
> 65372 hping3   RET   setsockopt 0
> 65372 hping3   CALL  connect(0x3,0x8067e20,0x10)
> 65372 hping3   RET   connect 0
> 65372 hping3   CALL  getsockname(0x3,0xbfbfe834,0xbfbfe848)
> 65372 hping3   RET   getsockname 0
> 65372 hping3   CALL  close(0x3)
> 65372 hping3   RET   close 0
> 65372 hping3   CALL  socket(PF_INET,SOCK_RAW,IPPROTO_RAW)
> 65372 hping3   RET   socket 3
> 65372 hping3   CALL  
> setsockopt(0x3,SOL_SOCKET,SO_BROADCAST,0xbfbfe8d4,0x4)
> 65372 hping3   RET   setsockopt 0
> 65372 hping3   CALL  setsockopt(0x3,0,0x2,0xbfbfe8d4,0x4)
> 65372 hping3   RET   setsockopt 0
> 65372 hping3   CALL  setsockopt(0x3,SOL_SOCKET,SO_SNDBUF,0xbfbfe8d4,0x4)
> 65372 hping3   RET   setsockopt 0
>
>>
>> Kris
>> _______________________________________________
>> freebsd-hackers@freebsd.org mailing list
>> http://lists.freebsd.org/mailman/listinfo/freebsd-hackers
>> To unsubscribe, send any mail to 
>> "freebsd-hackers-unsubscribe@freebsd.org"
>
I finally managed to get ktrace of falling hping

  2250 hping3   RET   sendto 40/0x28
  2250 hping3   CALL  sigaction(SIGALRM,0x7fffffffe7b0,0x7fffffffe790)
  2250 hping3   RET   sigaction 0
  2250 hping3   CALL  setitimer(0,0x7fffffffe7c0,0x7fffffffe7a0)
  2250 hping3   RET   setitimer 0
  2250 hping3   CALL  gettimeofday(0x7fffffffe780,0)
  2250 hping3   RET   gettimeofday 0
  2250 hping3   CALL  gettimeofday(0x7fffffffe780,0)
  2250 hping3   RET   gettimeofday 0
  2250 hping3   CALL  sendto(0x3,0x800e1b050,0x28,0,0x522600,0x10)
  2250 hping3   GIO   fd 3 wrote 40 bytes
       0x0000 4500 2800 c3f0 0000 4006 0000 0a03 0303 0a03 0301 9570 
0050 6b32 4398 30f3 e723 5002 0200 3737 0000  
|E.(.....@............p.Pk2C.0..#P...77..|
  2250 hping3   RET   sendto 40/0x28
  2250 hping3   CALL  sigaction(SIGALRM,0x7fffffffe7b0,0x7fffffffe790)
  2250 hping3   RET   sigaction 0
  2250 hping3   CALL  setitimer(0,0x7fffffffe7c0,0x7fffffffe7a0)
  2250 hping3   RET   setitimer 0
  2250 hping3   CALL  gettimeofday(0x7fffffffe780,0)
  2250 hping3   RET   gettimeofday 0
  2250 hping3   CALL  gettimeofday(0x7fffffffe780,0)
  2250 hping3   RET   gettimeofday 0
  2250 hping3   CALL  sendto(0x3,0x800e1b050,0x28,0,0x522600,0x10)
  2250 hping3   RET   sendto -1 errno 55 No buffer space available
  2250 hping3   CALL  writev(0x2,0x7fffffffe6a0,0x4)
  2250 hping3   GIO   fd 2 wrote 44 bytes
       "[send_ip] sendto: No buffer space available
       "
  2250 hping3   RET   writev 44/0x2c
  2250 hping3   CALL  close(0x3)
  2250 hping3   RET   close 0
  2250 hping3   CALL  close(0x4)
  2250 hping3   RET   close 0
  2250 hping3   CALL  exit(0x1)

and it only confirms that sendto failed.
BTW this is with patched source after calling setsockopt(..SO_SNDBUF..)
where bufsize = 165536.


-- 

Best Wishes,
Stefan Lambrev
ICQ# 24134177




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?479C6397.1000101>