Date: Fri, 21 Jan 2000 15:09:13 -0600 (CST) From: Gene Harris <zeus@tetronsoftware.com> To: George Vagner <george@www.timandpatrick.com> Cc: questions@FreeBSD.ORG Subject: Re: flags 0xa0ffa0ff help Message-ID: <Pine.BSF.4.10.10001211505230.4003-100000@tetron02.tetronsoftware.com> In-Reply-To: <XFMail.000121131710.george@vagner.com>
next in thread | previous in thread | raw e-mail | index | archive | help
You might want to set your flags to b0ffb0ff. This turns on LBA in the driver. The flag 0a only allows for 32 bit transfers and probing for pci ide dma controllers. Although, from the error message, it looks like you might have a bad spot on your hard drive. HTH *==============================================* *Gene Harris http://www.tetronsoftware.com* *FreeBSD Novice * *All ORBS.org SMTP connections are denied! * *==============================================* On Fri, 21 Jan 2000, George Vagner wrote: > when i boot up i get this message, I have flags 0xa0ffa0ff set in my > kernel and an udma drive Maxtor 85250D6 and an Udma cable is connected. > nothing is on the second controller and a Udma cdrom is on the primary > controllers second channel. > > The mainboard is a tyan 1598c2 with 164meg ram, amd 350, adaptec 1542cf > controller for the tape drive, and soundblaster 16 PNP for sound > matrox mystique pci for video. > > i tried changing my bios to LBA but that made no difference. > > where am i going wrong here...? > > > changing root device to wd0s1a > wd0s1a: reverting to PIO mode writing fsbn 196672 of 196672-196687 (wd0s1 bn 196 > 672; cn 12 tn 61 sn 49) (status 51<rdy,seekdone,err> error 84<badblk,abort>) > > > ---------------------------------- > E-Mail: George Vagner <george@vagner.com> > Date: 21-Jan-00 > Time: 13:10:17 > > This message was sent by XFMail > ---------------------------------- > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.10.10001211505230.4003-100000>