Date: Fri, 22 Jun 2007 13:30:08 GMT From: Gavin Atkinson <gavin@FreeBSD.org> To: freebsd-usb@FreeBSD.org Subject: Re: usb/74453: Q-lity CD-RW USB ECW-043 (ScanLogic SL11R chipset) does not work Message-ID: <200706221330.l5MDU8Vh035393@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR usb/74453; it has been noted by GNATS.
From: Gavin Atkinson <gavin@FreeBSD.org>
To: bug-followup@FreeBSD.org
Cc:
Subject: Re: usb/74453: Q-lity CD-RW USB ECW-043 (ScanLogic SL11R chipset)
does not work
Date: Fri, 22 Jun 2007 14:28:37 +0100
For the audit-trail:
-------- Forwarded Message --------
From: Federico Galvez-Durand Besnard <fico@del.ufrj.br>
Date: Fri, 22 Jun 2007 11:23:34 +0200
Yes, it is still the same problem:
++++ Begin Follow-up ++++
camelot# uname -a
FreeBSD camelot.local 6.2-RELEASE-p5 FreeBSD 6.2-RELEASE-p5 #0: Thu Jun
21 19:23:02 CEST 2007
root@camelot.local:/usr/obj/usr/src/sys/CAMELOT i386
camelot# dmesg | grep umass0
umass0: ScanLogic USBIDE ScanLogic USBIDE, rev 1.10/2.61, addr 2
umass0: Invalid CSW: tag 849 should be 1
umass0: Invalid CSW: tag 849 should be 2
umass0: Invalid CSW: tag 849 should be 3
umass0: Invalid CSW: tag 849 should be 4
umass0: Invalid CSW: tag 849 should be 5
umass0: Invalid CSW: tag 849 should be 6
(da0:umass-sim0:0:0:0): got CAM status 0x4
(da0:umass-sim0:0:0:0): fatal error, failed to attach to device
(da0:umass-sim0:0:0:0): lost device
umass0: Invalid CSW: tag 849 should be 7
umass0: Invalid CSW: tag 849 should be 8
umass0: Invalid CSW: tag 849 should be 9
umass0: Invalid CSW: tag 849 should be 10
umass0: Invalid CSW: tag 849 should be 11
(da0:umass-sim0:0:0:0): removing device entry
Opened disk da0 -> 5
root@camelot# camcontrol devlist -v
scbus0 on ata0 bus 0:
< > at scbus0 target -1 lun -1 ()
scbus1 on ata1 bus 0:
<TOSHIBA DVD-ROM SD-C2402 1317> at scbus1 target 0 lun 0 (pass0,cd0)
< > at scbus1 target -1 lun -1 ()
scbus2 on umass-sim0 bus 0:
< > at scbus2 target 0 lun 0 (pass1)
scbus-1 on xpt0 bus 0:
< > at scbus-1 target -1 lun -1 (xpt0)
root@camelot# usbdevs -v
Controller /dev/usb0:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x0000), rev 1.00
port 1 addr 2: full speed, self powered, config 1, ScanLogic
USBIDE(0x0002), ScanLogic USBIDE(0x04ce), rev 2.61
port 2 powered
root@camelot# diff -u umass.c.orig /usr/src/sys/dev/usb/umass.c
--- umass.c.orig Thu Jun 21 19:02:27 2007
+++ /usr/src/sys/dev/usb/umass.c Thu Jun 21 19:02:58 2007
@@ -460,7 +460,7 @@
},
{ USB_VENDOR_SCANLOGIC, USB_PRODUCT_SCANLOGIC_SL11R, RID_WILDCARD,
UMASS_PROTO_ATAPI | UMASS_PROTO_BBB,
- NO_INQUIRY
+ NO_INQUIRY | WRONG_CSWSIG
},
{ USB_VENDOR_SHUTTLE, USB_PRODUCT_SHUTTLE_EUSB, RID_WILDCARD,
UMASS_PROTO_ATAPI | UMASS_PROTO_CBI_I,
++++ End Follow-up ++++
Some comments:
This was my original post:
http://lists.freebsd.org/mailman/htdig/freebsd-usb/2004-December/000318.html
I went through my files and found some work I did and reported to this list:
http://lists.freebsd.org/mailman/htdig/freebsd-usb/2005-February/000660.html
As far as I remember, I managed to mount this CDROM and use it in RO mode.
I could not make the kernel recognise it as a RW device.
At that time, I got many cheap working flash drives > 512MB and a new
machine, so this machine (PIII@800MHz/384MB mem) was assigned to a
mission in which backup on CD was no longer necessary.
This hacking was no longer a priority.
And now I guess I did not report my work in the right way because I
can't see these messages:
http://lists.freebsd.org/mailman/htdig/freebsd-usb/2004-December/000318.html
http://lists.freebsd.org/mailman/htdig/freebsd-usb/2005-February/000660.html
linked to my orginial PR:
Number: 74453
Category: usb
Synopsis: Q-lity CD-RW USB ECW-043 (ScanLogic SL11R chipset) does not
work
Severity: non-critical
Priority: low
Responsible: freebsd-usb@FreeBSD.org
State: feedback
Class: sw-bug
Arrival-Date: Sat Nov 27 17:30:24 GMT 2004
Closed-Date:
Last-Modified: Thu Jun 14 17:50:21 GMT 2007
Originator: Federico Besnard
Release: 5.3 Stable
I need to pay more attention on how to handle a PR.
Thanks.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200706221330.l5MDU8Vh035393>