Date: Fri, 8 Dec 2000 11:37:03 +0100 From: Mark Rowlands <mark.rowlands@minmail.net> To: freebsd-questions@freebsd.org Cc: njh@kernighan.demon.co.uk;, root@groenquist.com Subject: profiling timer expired....again Message-ID: <00120811370304.45860@web1.tninet.se>
next in thread | raw e-mail | index | archive | help
I get this error "profiling timer expired" causing init: /bin/sh terminates abnormally in /etc/rc exiting to single user mode this cropped up a while (August - September) ago with 4.1R-4.1stable and mysteriously vanished. it seemed to be possibly related to qlogic cards using the isp driver. Any $.02 welcome (Euro accepted as well) tried upgrading bios of qlogic to no effect Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.2-RELEASE #0: Mon Nov 20 13:02:55 GMT 2000 jkh@bento.FreeBSD.org:/usr/src/sys/compile/GENERIC Timecounter "i8254" frequency 1193182 Hz CPU: Pentium/P55C (232.11-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x543 Stepping = 3 Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX> real memory = 100663296 (98304K bytes) config> di sn0 config> di lnc0 config> di ie0 config> di fe0 config> di ed0 config> di cs0 config> di bt0 config> di aic0 config> di aha0 config> di adv0 config> q avail memory = 93646848 (91452K bytes) Preloaded elf kernel "kernel" at 0xc0436000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc043609c. Intel Pentium detected, installing workaround for F00F bug md0: Malloc disk npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 isab0: <Intel 82371SB PCI to ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX3 ATA controller> port 0xffa0-0xffaf at device 7.1 on pci0 ata1: at 0x170 irq 15 on atapci0 pci0: <S3 Trio graphics accelerator> at 8.0 irq 10 isp0: <Qlogic ISP 1020/1040 PCI SCSI Adapter> port 0xfc00-0xfcff mem 0xffbef000-0x xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xf880-0xf8ff mem 0xffbeec00-0xffbeec xl0: Ethernet address: 00:10:4b:b2:0e:69 miibus0: <MII bus> on xl0 xlphy0: <3Com internal media interface> on miibus0 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0: configured irq 4 not in bitmap of probed irqs 0 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 sio1: configured irq 3 not in bitmap of probed irqs 0 ppc0: parallel port not found. acd0: CDROM <NEC CD-ROM DRIVE:282> at ata1-slave using PIO3 Waiting 15 seconds for SCSI devices to settle isp0: 0.0 get user period 0xc offset 0x8 flags 0xfd00 isp0: 0.0 get current period 0x19 offset 0x0 flags 0xc500 isp0: 0.0 set current period 0xc offset 0x8 flags 0xfd00 Mounting root from ufs:/dev/da0s1a da0 at isp0 bus 0 target 0 lun 0 da0: <SEAGATE ST34572W 0876> Fixed Direct Access SCSI-2 device isp0: 0.0 get current period 0xc offset 0x8 flags 0xfd00 da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled da0: 4340MB (8888924 512 byte sectors: 255H 63S/T 553C) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?00120811370304.45860>