Date: Mon, 25 Feb 2008 09:07:19 +0300 From: Lystopad Oleksandr <laa@laa.zp.ua> To: John Nielsen <lists@jnielsen.net> Cc: freebsd-questions@freebsd.org Subject: Re: wi0 (4.11) <=> rum0 (7.0) Message-ID: <20080225060719.GA2055@laa.zp.ua> In-Reply-To: <200802211056.59969.lists@jnielsen.net> References: <20080221074609.GN79704@laa.zp.ua> <200802211056.59969.lists@jnielsen.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Hello, John Nielsen! On Thu, Feb 21, 2008 at 10:56:59AM -0500 lists@jnielsen.net wrote about "Re: wi0 (4.11) <=> rum0 (7.0)": > On Thursday 21 February 2008 02:46:09 am Lystopad Oleksandr wrote: > > Hi! > > > > I have two FreeBSD boxes. One with 4.11 and wi0 device, and another > > with 7.0-PRE with rum0 device. I need to connect wi0 and rum0 via > > adhoc mode. 7.0 cant find wi0 device with ifconfig rum0 scan. > > > > Please, help me to connect this two networks together. > > > > ifconfig rum0: > > rum0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu > > 1500 ether 00:c0:a8:f4:53:18 > > media: IEEE 802.11 Wireless Ethernet DS/11Mbps mode 11b <adhoc> > > status: no carrier > > ssid MYNET channel 1 (2412 Mhz 11b) bssid 00:02:2d:30:2d:22 > > authmode OPEN privacy OFF txpower 50 scanvalid 60 bgscan > > bgscanintvl 300 bgscanidle 250 roam:rssi11b 7 roam:rate11b 1 > > roaming MANUAL > > > > ifconfig wi0: > > wi0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > > inet 10.xx.xx.10 netmask 0xfffffffc broadcast 10.xx.xx.11 > > ether 00:02:2d:30:2d:22 > > media: IEEE 802.11 Wireless Ethernet autoselect (DS/11Mbps > > <adhoc>) status: associated > > ssid MYNET 1:RS > > stationname my-name > > channel 1 authmode OPEN powersavemode OFF powersavesleep 100 > > wepmode OFF weptxkey 1 > > I'm pretty sure you only want one of the adapters in ad-hoc mode. The > other one can just be in station mode. Thanks, John for your reply! But I can not find station mode in handbook. Please, point me to right place to read about it. Thanks. -- Oleksandr Lystopad
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20080225060719.GA2055>