Date: Thu, 4 Jan 2001 14:13:32 +0000 (GMT) From: Nick Hibma <n_hibma@calcaphon.com> To: Samuel Tardieu <sam@inf.enst.fr> Cc: freebsd-mobile@FreeBSD.ORG Subject: Re: Integrated memory stick reader Message-ID: <Pine.BSF.4.20.0101041413180.12179-100000@henny.webweaving.org> In-Reply-To: <2001-01-04-15-03-03%2Btrackit%2Bsam@inf.enst.fr>
next in thread | previous in thread | raw e-mail | index | archive | help
Did you load the ugen module?
Nick
On Thu, 4 Jan 2001, Samuel Tardieu wrote:
> On 4/01, Nick Hibma wrote:
>
> | If you have the laptop, load the usb, umass and ugen modules (in that
> | order) and see whether the device is attached to. If so, it is. It might
> | however be that in some cases it is an IDE device.
>
> I cannot see it, neither does "camcontrol rescan 0".
>
> | Or send the output of dmesg.
>
> This is a -CURRENT cvsuped one hour ago.
>
> Copyright (c) 1992-2001 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD 5.0-CURRENT #0: Thu Jan 4 14:31:57 CET 2001
> root@trillian.enst.fr:/usr/obj/usr/src/sys/TRILLIAN
> Timecounter "i8254" frequency 1193182 Hz
> CPU: Pentium III/Pentium III Xeon/Celeron (645.21-MHz 686-class CPU)
> Origin = "GenuineIntel" Id = 0x683 Stepping = 3
> Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
> real memory = 134152192 (131008K bytes)
> avail memory = 126152704 (123196K bytes)
> Preloaded elf kernel "kernel" at 0xc0446000.
> Preloaded elf module "ipl.ko" at 0xc044609c.
> link_elf: symbol pfil_add_hook undefined
> KLD file ipl.ko - could not finalize loading
> Pentium Pro MTRR support enabled
> ACPI debug layer 0x0 debug level 0x0
> Using $PIR table, 7 entries at 0xc00fdf50
> apm0: <APM BIOS> on motherboard
> apm0: found APM BIOS v1.2, connected at v1.2
> acpi0: <SONY Z1 > on motherboard
> acpi_tz0: <thermal zone> on acpi0
> acpi_tz0: current temperature 65.9C
> acpi_button0: <Control Method Power Button Device> on acpi0
> acpi_pcib0: <Host-PCI bridge> on acpi0
> pci0: <PCI bus> on acpi_pcib0
> pcib1: <PCI-PCI bridge> at device 1.0 on pci0
> pci1: <PCI bus> on pcib1
> vga_pci0: <VGA-compatible display device> mem 0xfeb00000-0xfebfffff,0xfe400000-0xfe7fffff,0xfc000000-0xfdffffff irq 9 at device 0.0 on pci1
> isab0: <PCI-ISA bridge> at device 7.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel PIIX4 ATA33 controller> port 0xfc90-0xfc9f at device 7.1 on pci0
> ata0: at 0x1f0 irq 14 on atapci0
> ata1: at 0x170 irq 15 on atapci0
> uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xfca0-0xfcbf irq 9 at device 7.2 on pci0
> usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
> usb0: USB revision 1.0
> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> pci0: <bridge, PCI-unknown> at 7.3 (no driver attached)
> pci0: <serial bus, FireWire> at 8.0 (no driver attached)
> pcm0: <Yamaha DS-1E (YMF744)> port 0xfc8c-0xfc8f,0xfcc0-0xfcff mem 0xfedf8000-0xfedfffff irq 9 at device 9.0 on pci0
> pci0: <simple comms> at 10.0 (no driver attached)
> fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xfc40-0xfc7f mem 0xfec00000-0xfecfffff,0xfedf6000-0xfedf6fff irq 9 at device 11.0 on pci0
> fxp0: Ethernet address 08:00:46:0c:b4:c7
> pcic-pci0: <Ricoh RL5C475 PCI-CardBus Bridge> at device 12.0 on pci0
> pci0: <old, non-VGA display device> at 13.0 (no driver attached)
> acpi_ec0: <embedded controller> on acpi0
> acpi_cmbat0: <Control method Battery> on acpi0
> acpi_acad0: <AC adapter> on acpi0
> acpi_acad0: On Line
> acpi_pr0: <processor device> on acpi0
> acpi_pr0: supported power states: C0 (0us) C1 (0us) C2 (10us)
> acpi_pr0: supported throttling states: 100% 87% 75% 62% 50% 37% 25% 12%
> acpi_timer0: <24-bit timer at 3.579545MHz> on acpi0
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
> atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
> kbd0 at atkbd0
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: model GlidePoint, device ID 0
> pcic0: <Intel i82365> at port 0x3e0 iomem 0xd0000 irq 10 on isa0
> pcic0: management irq 10
> pccard0: <PC Card bus -- kludge version> on pcic0
> pmtimer0 on isa0
> ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
> ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
> ppc0: FIFO with 16/16/8 bytes threshold
> plip0: <PLIP network interface> on ppbus0
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> ppi0: <Parallel I/O> on ppbus0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> sio0: type 16550A
> sio1: configured irq 3 not in bitmap of probed irqs 0
> spic0: <Sony Programmable I/O Controller> at port 0x10a0-0x10a4 on isa0
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> atspeaker0: <AT speaker> at port 0x61 on isa0
> unknown: <PNP0303> can't assign resources
> unknown: <PNP0F13> can't assign resources
> unknown: <SNY6001> can't assign resources
> ppc1: parallel port not found.
> ppc1: parallel port not found.
> unknown: <PNP0401> can't assign resources
> ppc1: parallel port not found.
> IPsec: Initialized Security Association Processing.
> ad0: 11513MB <IBM-DARA-212000> [23392/16/63] at ata0-master UDMA33
> Mounting root from ufs:/dev/ad0s2a
>
>
>
>
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-mobile" in the body of the message
>
--
Qube Software, Ltd. Private:
n_hibma@qubesoft.com n_hibma@webweaving.org
n_hibma@freebsd.org
http://www.qubesoft.com/ http://www.etla.net/~n_hibma/
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.20.0101041413180.12179-100000>