Date: Thu, 26 Jul 2001 04:14:19 +0000 From: "Phuoc Nguyen" <vungtau@hotmail.com> To: jonathan.chen@itouch.co.nz Cc: freebsd-questions@FreeBSD.ORG, ipthomas_77@yahoo.com, vungtau@hotmail.com Subject: Re: Can not configure XFree86 Server for ATI Rage Fury Pro 32MB AGP Message-ID: <F122A53mPqsoWGaaDi300008a83@hotmail.com>
next in thread | raw e-mail | index | archive | help
Hi all, I installed FreeBSD 4.2 on my machine with ATI Rage Fury Pro 32MB AGP. I installed XFree86 4.1.0 and chose "y" options most of the time except for Japanese font, small font, etc. However, I got error when I run the command "XFree86 -configure": "Fatal server error: XFree86 has found a valid card configuration. Unfortunately the appropriate data has not been added to xf86PciInfo.h. Please forward 'scanpci -v' output to XFree86 support team" Here is the output: "pci bus 0x0 cardnum 0x00 function 0x0000: vendor 0x1106 device 0x0691 VIA Device unknown STATUS 0x2210 COMMAND 0x0006 CLASS 0x06 0x00 0x00 REVISION 0x44 pci bus 0x0 cardnum 0x01 function 0x0000: vendor 0x1106 device 0x8598 VIA VT 82C598 MVP3 PCI/AGP Bridge STATUS 0x2230 COMMAND 0x0007 CLASS 0x06 0x04 0x00 REVISION 0x00 HEADER 0x01 LATENCY 0x00 PRIBUS 0x00 SECBUS 0x01 SUBBUS 0x01 SECLT 0x00 IOBASE 0x9000 IOLIM 0x9fff SECSTATUS 0x0000 NOPREFETCH_MEMBASE 0xd8000000 MEMLIM 0xd9ffffff PREFETCH_MEMBASE 0xd4000000 MEMLIM 0xd7ffffff NO_FAST_B2B NO_SEC_BUS_RST NO_M_ABRT VGA_EN ISA_EN NO_PERR_EN pci bus 0x0 cardnum 0x07 function 0x0000: vendor 0x1106 device 0x0596 VIA Device unknown CardVendor 0x1106 card 0x0000 (VIA, Card unknown) STATUS 0x0200 COMMAND 0x0087 CLASS 0x06 0x01 0x00 REVISION 0x12 HEADER 0x80 LATENCY 0x00 pci bus 0x0 cardnum 0x07 function 0x0001: vendor 0x1106 device 0x0571 VIA VT 82C586 MVP3 IDE Bridge STATUS 0x0280 COMMAND 0x0007 CLASS 0x01 0x01 0x8a REVISION 0x06 BIST 0x00 HEADER 0x00 LATENCY 0x20 CACHE 0x00 BASE4 0x0000a001 addr 0x0000a000 I/O MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x00 INT_LINE 0xff BYTE_0 0x3a09f20b BYTE_1 0x00 BYTE_2 0x00 BYTE_3 0x00 pci bus 0x0 cardnum 0x07 function 0x0002: vendor 0x1106 device 0x3038 VIA VT 82C586 MVP3 USB Controller CardVendor 0x0925 card 0x1234 (Card unknown) STATUS 0x0200 COMMAND 0x0007 CLASS 0x0c 0x03 0x00 REVISION 0x08 BIST 0x00 HEADER 0x00 LATENCY 0x20 CACHE 0x08 BASE4 0x0000a401 addr 0x0000a400 I/O MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x04 INT_LINE 0x0a pci bus 0x0 cardnum 0x07 function 0x0003: vendor 0x1106 device 0x3051 VIA Device unknown STATUS 0x0280 COMMAND 0x0000 CLASS 0x06 0x00 0x00 REVISION 0x20 pci bus 0x0 cardnum 0x0f function 0x0000: vendor 0x105a device 0x4d30 Device unknown CardVendor 0x105a card 0x4d33 (Card unknown) STATUS 0x0210 COMMAND 0x0007 CLASS 0x01 0x80 0x00 REVISION 0x02 BIST 0x00 HEADER 0x00 LATENCY 0x20 CACHE 0x00 BASE0 0x0000a801 addr 0x0000a800 I/O BASE1 0x0000ac01 addr 0x0000ac00 I/O BASE2 0x0000b001 addr 0x0000b000 I/O BASE3 0x0000b401 addr 0x0000b400 I/O BASE4 0x0000b801 addr 0x0000b800 I/O BASE5 0xdb100000 addr 0xdb100000 MEM MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x01 INT_LINE 0x0b pci bus 0x0 cardnum 0x10 function 0x0000: vendor 0x1102 device 0x0002 Creative Labs Device unknown CardVendor 0x1102 card 0x8040 (Creative Labs, Card unknown) STATUS 0x0290 COMMAND 0x0005 CLASS 0x04 0x01 0x00 REVISION 0x05 BIST 0x00 HEADER 0x80 LATENCY 0x20 CACHE 0x00 BASE0 0x0000bc01 addr 0x0000bc00 I/O MAX_LAT 0x14 MIN_GNT 0x02 INT_PIN 0x01 INT_LINE 0x09 pci bus 0x0 cardnum 0x10 function 0x0001: vendor 0x1102 device 0x7002 Creative Labs Device unknown CardVendor 0x1102 card 0x0020 (Creative Labs, Card unknown) STATUS 0x0290 COMMAND 0x0005 CLASS 0x09 0x80 0x00 REVISION 0x05 BIST 0x00 HEADER 0x80 LATENCY 0x20 CACHE 0x00 BASE0 0x0000c001 addr 0x0000c000 I/O pci bus 0x0 cardnum 0x11 function 0x0000: vendor 0x8086 device 0x1030 Intel Device unknown CardVendor 0x8086 card 0x1030 (Intel, Card unknown) STATUS 0x0290 COMMAND 0x0007 CLASS 0x02 0x00 0x00 REVISION 0x08 BIST 0x00 HEADER 0x00 LATENCY 0x20 CACHE 0x08 BASE0 0xdb120000 addr 0xdb120000 MEM BASE1 0x0000c401 addr 0x0000c400 I/O BASE2 0xdb000000 addr 0xdb000000 MEM MAX_LAT 0x38 MIN_GNT 0x08 INT_PIN 0x01 INT_LINE 0x09 pci bus 0x1 cardnum 0x00 function 0x0000: vendor 0x1002 device 0x5446 ATI Device unknown CardVendor 0x1002 card 0x0018 (ATI, Card unknown) STATUS 0x02b0 COMMAND 0x0087 CLASS 0x03 0x00 0x00 REVISION 0x00 BIST 0x00 HEADER 0x00 LATENCY 0x20 CACHE 0x08 BASE0 0xd4000008 addr 0xd4000000 MEM PREFETCHABLE BASE1 0x00009001 addr 0x00009000 I/O BASE2 0xd9000000 addr 0xd9000000 MEM MAX_LAT 0x00 MIN_GNT 0x08 INT_PIN 0x01 INT_LINE 0x0b" Please help me fix it. Thank you very much. Phuoc From: Jonathan Chen <jonathan.chen@itouch.co.nz> To: Phuoc Nguyen <vungtau@hotmail.com> CC: freebsd-questions@FreeBSD.ORG Subject: Re: Can not configure XFree86 Server for ATI Rage Fury Pro 32MB AGP Date: Fri, 20 Jul 2001 10:16:52 +1200 On Thu, Jul 19, 2001 at 09:27:36PM +0000, Phuoc Nguyen wrote: > I use FreeBSD4.2; thus, I think my version is 4.X. > BTW, what is the name of video card you had chosen? > My video card is Rage Fury Pro 32 MB AGP but I > do not see it in the video card list of FreeBSD4.2 > Thanks. You need to build XFree86-4 from the ports system. The ATI Rage series is supported: http://www.xfree86.org/4.1.0/Status6.html Give that a try and then get back to us. -- Jonathan Chen <jonathan.chen@itouch.co.nz> ---------------------------------------------------------------------- Don't worry about avoiding temptation, as you grow older, it starts avoiding you. _________________________________________________________________ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?F122A53mPqsoWGaaDi300008a83>