Date: Thu, 26 Jul 2001 00:45:06 -0400 From: Joe Clarke <marcus@marcuscom.com> To: Phuoc Nguyen <vungtau@hotmail.com> Cc: jonathan.chen@itouch.co.nz, freebsd-questions@FreeBSD.ORG, ipthomas_77@yahoo.com, vungtau@hotmail.com Subject: Re: Can not configure XFree86 Server for ATI Rage Fury Pro 32MB AGP Message-ID: <20010726004506.A23421@shumai.marcuscom.com> In-Reply-To: <F122A53mPqsoWGaaDi300008a83@hotmail.com>; from vungtau@hotmail.com on Thu, Jul 26, 2001 at 00:14:19 -0400 References: <F122A53mPqsoWGaaDi300008a83@hotmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
You probably want to send this to the XFree86 support people (see http://www.xfree86.org for more details), and not the FreeBSD support people. However, I have never needed to run XFree86 -configure. I run xf86config, then take a quick glance at the resulting /etc/X11/XF86Config file, and if that looks good, I run startx to test. I have never configured a Rage Fury Pro, though XFree 4.0.3 works for my GeForce II and my ATI AIW Pro. Joe Clarke On 2001.07.26 00:14 Phuoc Nguyen wrote: > Hi all, > > I installed FreeBSD 4.2 on my machine with ATI Rage Fury Pro 32MB AGP. > I installed XFree86 4.1.0 and chose "y" options most of the time except > for > Japanese font, small font, etc. However, I got error when I run the > command > "XFree86 -configure": > > "Fatal server error: > XFree86 has found a valid card configuration. > Unfortunately the appropriate data has not been added to xf86PciInfo.h. > Please forward 'scanpci -v' output to XFree86 support team" > > Here is the output: > "pci bus 0x0 cardnum 0x00 function 0x0000: vendor 0x1106 device 0x0691 > VIA Device unknown > STATUS 0x2210 COMMAND 0x0006 > CLASS 0x06 0x00 0x00 REVISION 0x44 > > pci bus 0x0 cardnum 0x01 function 0x0000: vendor 0x1106 device 0x8598 > VIA VT 82C598 MVP3 PCI/AGP Bridge > STATUS 0x2230 COMMAND 0x0007 > CLASS 0x06 0x04 0x00 REVISION 0x00 > HEADER 0x01 LATENCY 0x00 > PRIBUS 0x00 SECBUS 0x01 SUBBUS 0x01 SECLT 0x00 > IOBASE 0x9000 IOLIM 0x9fff SECSTATUS 0x0000 > NOPREFETCH_MEMBASE 0xd8000000 MEMLIM 0xd9ffffff > PREFETCH_MEMBASE 0xd4000000 MEMLIM 0xd7ffffff > NO_FAST_B2B NO_SEC_BUS_RST NO_M_ABRT VGA_EN ISA_EN NO_PERR_EN > > pci bus 0x0 cardnum 0x07 function 0x0000: vendor 0x1106 device 0x0596 > VIA Device unknown > CardVendor 0x1106 card 0x0000 (VIA, Card unknown) > STATUS 0x0200 COMMAND 0x0087 > CLASS 0x06 0x01 0x00 REVISION 0x12 > HEADER 0x80 LATENCY 0x00 > > pci bus 0x0 cardnum 0x07 function 0x0001: vendor 0x1106 device 0x0571 > VIA VT 82C586 MVP3 IDE Bridge > STATUS 0x0280 COMMAND 0x0007 > CLASS 0x01 0x01 0x8a REVISION 0x06 > BIST 0x00 HEADER 0x00 LATENCY 0x20 CACHE 0x00 > BASE4 0x0000a001 addr 0x0000a000 I/O > MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x00 INT_LINE 0xff > BYTE_0 0x3a09f20b BYTE_1 0x00 BYTE_2 0x00 BYTE_3 0x00 > > pci bus 0x0 cardnum 0x07 function 0x0002: vendor 0x1106 device 0x3038 > VIA VT 82C586 MVP3 USB Controller > CardVendor 0x0925 card 0x1234 (Card unknown) > STATUS 0x0200 COMMAND 0x0007 > CLASS 0x0c 0x03 0x00 REVISION 0x08 > BIST 0x00 HEADER 0x00 LATENCY 0x20 CACHE 0x08 > BASE4 0x0000a401 addr 0x0000a400 I/O > MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x04 INT_LINE 0x0a > > pci bus 0x0 cardnum 0x07 function 0x0003: vendor 0x1106 device 0x3051 > VIA Device unknown > STATUS 0x0280 COMMAND 0x0000 > CLASS 0x06 0x00 0x00 REVISION 0x20 > > pci bus 0x0 cardnum 0x0f function 0x0000: vendor 0x105a device 0x4d30 > Device unknown > CardVendor 0x105a card 0x4d33 (Card unknown) > STATUS 0x0210 COMMAND 0x0007 > CLASS 0x01 0x80 0x00 REVISION 0x02 > BIST 0x00 HEADER 0x00 LATENCY 0x20 CACHE 0x00 > BASE0 0x0000a801 addr 0x0000a800 I/O > BASE1 0x0000ac01 addr 0x0000ac00 I/O > BASE2 0x0000b001 addr 0x0000b000 I/O > BASE3 0x0000b401 addr 0x0000b400 I/O > BASE4 0x0000b801 addr 0x0000b800 I/O > BASE5 0xdb100000 addr 0xdb100000 MEM > MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x01 INT_LINE 0x0b > > pci bus 0x0 cardnum 0x10 function 0x0000: vendor 0x1102 device 0x0002 > Creative Labs Device unknown > CardVendor 0x1102 card 0x8040 (Creative Labs, Card unknown) > STATUS 0x0290 COMMAND 0x0005 > CLASS 0x04 0x01 0x00 REVISION 0x05 > BIST 0x00 HEADER 0x80 LATENCY 0x20 CACHE 0x00 > BASE0 0x0000bc01 addr 0x0000bc00 I/O > MAX_LAT 0x14 MIN_GNT 0x02 INT_PIN 0x01 INT_LINE 0x09 > > pci bus 0x0 cardnum 0x10 function 0x0001: vendor 0x1102 device 0x7002 > Creative Labs Device unknown > CardVendor 0x1102 card 0x0020 (Creative Labs, Card unknown) > STATUS 0x0290 COMMAND 0x0005 > CLASS 0x09 0x80 0x00 REVISION 0x05 > BIST 0x00 HEADER 0x80 LATENCY 0x20 CACHE 0x00 > BASE0 0x0000c001 addr 0x0000c000 I/O > > pci bus 0x0 cardnum 0x11 function 0x0000: vendor 0x8086 device 0x1030 > Intel Device unknown > CardVendor 0x8086 card 0x1030 (Intel, Card unknown) > STATUS 0x0290 COMMAND 0x0007 > CLASS 0x02 0x00 0x00 REVISION 0x08 > BIST 0x00 HEADER 0x00 LATENCY 0x20 CACHE 0x08 > BASE0 0xdb120000 addr 0xdb120000 MEM > BASE1 0x0000c401 addr 0x0000c400 I/O > BASE2 0xdb000000 addr 0xdb000000 MEM > MAX_LAT 0x38 MIN_GNT 0x08 INT_PIN 0x01 INT_LINE 0x09 > > pci bus 0x1 cardnum 0x00 function 0x0000: vendor 0x1002 device 0x5446 > ATI Device unknown > CardVendor 0x1002 card 0x0018 (ATI, Card unknown) > STATUS 0x02b0 COMMAND 0x0087 > CLASS 0x03 0x00 0x00 REVISION 0x00 > BIST 0x00 HEADER 0x00 LATENCY 0x20 CACHE 0x08 > BASE0 0xd4000008 addr 0xd4000000 MEM PREFETCHABLE > BASE1 0x00009001 addr 0x00009000 I/O > BASE2 0xd9000000 addr 0xd9000000 MEM > MAX_LAT 0x00 MIN_GNT 0x08 INT_PIN 0x01 INT_LINE 0x0b" > > Please help me fix it. > Thank you very much. > > Phuoc > > > > > > From: Jonathan Chen <jonathan.chen@itouch.co.nz> > To: Phuoc Nguyen <vungtau@hotmail.com> > CC: freebsd-questions@FreeBSD.ORG > Subject: Re: Can not configure XFree86 Server for ATI Rage Fury Pro 32MB > AGP > Date: Fri, 20 Jul 2001 10:16:52 +1200 > > On Thu, Jul 19, 2001 at 09:27:36PM +0000, Phuoc Nguyen wrote: > > I use FreeBSD4.2; thus, I think my version is 4.X. > > BTW, what is the name of video card you had chosen? > > My video card is Rage Fury Pro 32 MB AGP but I > > do not see it in the video card list of FreeBSD4.2 > > Thanks. > > You need to build XFree86-4 from the ports system. The ATI Rage series > is supported: > > http://www.xfree86.org/4.1.0/Status6.html > > Give that a try and then get back to us. > -- > Jonathan Chen <jonathan.chen@itouch.co.nz> > ---------------------------------------------------------------------- > Don't worry about avoiding temptation, > as you grow older, it starts avoiding you. > > > _________________________________________________________________ > Get your FREE download of MSN Explorer at > http://explorer.msn.com/intl.asp > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010726004506.A23421>