Date: Tue, 30 Sep 2014 10:51:10 +1000 From: Outback Dingo <outbackdingo@gmail.com> To: Steven Hartland <killing@multiplay.co.uk> Cc: freebsd-stable@freebsd.org, Karl Denninger <karl@denninger.net> Subject: Re: MPS Message-ID: <CAKYr3zwbvQp2HsbQfDrA9dhiv-xRk9jEzsdHyEkXg2_OMAhBwQ@mail.gmail.com> In-Reply-To: <E2DBE4F68F8145E4BBBE79197C39E1D2@multiplay.co.uk> References: <5429BB41.8080609@denninger.net> <018BC41041EE4DF589EF5D834AD45BAD@multiplay.co.uk> <CAN6yY1v2MyOMahcTEagjxKQ33q56MmSwHx87_ZqyVYR5RDH8Mw@mail.gmail.com> <5429F820.6040305@denninger.net> <E2DBE4F68F8145E4BBBE79197C39E1D2@multiplay.co.uk>
next in thread | previous in thread | raw e-mail | index | archive | help
I thought there was a tool to "blink" a specific drive light, when we built our chassis we had a similar issue, and found ses tools to be helpful. however we we using a high end storage device with enclosures and 2 8211 LSI cards with geom_multipath / HA On Tue, Sep 30, 2014 at 10:41 AM, Steven Hartland <killing@multiplay.co.uk> wrote: > ----- Original Message ----- From: "Karl Denninger" <karl@denninger.net> > > Glabel works fine across the board provided you put it on a slice rather >> than a disk, which I do anyway so as to maintain "nice-nice" with AF >> (4k) disks along with leaving a small amount of space at the end >> unallocated, so if by some chance a different brand replacement drive >> isn't quite the same number of sectors it can be dropped into the pool >> as a replacement. >> > > You can also use gpart add with a -l <label> > > Regards > Steve > > _______________________________________________ > freebsd-stable@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAKYr3zwbvQp2HsbQfDrA9dhiv-xRk9jEzsdHyEkXg2_OMAhBwQ>