Date: Fri, 7 Apr 2000 12:02:38 -0400 From: "Paul Haddad" <paul@pth.com> To: <questions@freebsd.org> Subject: Weird boot problem with netpliance iopener Message-ID: <014601bfa0aa$b69250f0$0bac2ac0@pth.com>
next in thread | raw e-mail | index | archive | help
Hi All,
I've got a small version of / fs mounted read only in the 16MB sandisk of a
netpliance iopener.
If I hit tab during machine startup (this gets rid of the iopener logo image
and shows the iopener mounting the sandisk as the primary slave) then the
machine properly boots.
If I don't the machine hangs right after the Booting [kernel]... line.
Anyone know why? I've included dmesg output in case it helps.
---
Paul Haddad (paul@pth.com)
Remember, even if you win the rat race -- you're still a rat.
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-STABLE #1: Thu Apr 6 19:21:10 EDT 2000
root@netserver.pth.com:/usr/tmp/src/sys/compile/IOPENER
Timecounter "i8254" frequency 1193182 Hz
CPU: IDT WinChip C6 (200.46-MHz 586-class CPU)
Origin = "CentaurHauls" Id = 0x541 Stepping = 1
Features=0x8000b5<FPU,DE,TSC,MSR,MCE,MMX>
real memory = 31457280 (30720K bytes)
avail memory = 27594752 (26948K bytes)
Preloaded elf kernel "kernel" at 0xc0320000.
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib2: <PCI to PCI bridge (vendor=1106 device=8501)> at device 1.0 on pci0
pci1: <PCI bus> on pcib2
pci1: <Trident model 8420 VGA-compatible display device> at 0.0
isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA66 controller> port 0xe000-0xe00f at device 7.1 on
pci0
ata0: at 0x1f0 irq 14 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xe400-0xe41f irq 15 at device 7.2
on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
aue0: SMC, Inc EZ USB/Ethernet Converter, rev 1.10/1.01, addr 2
aue0: Ethernet address: 00:e0:29:59:d1:3e
miibus0: <MII bus> on aue0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
uhci1: <VIA 83C572 USB controller> port 0xe800-0xe81f irq 15 at device 7.3
on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pcib1: <Host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib1
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
pcm0: <Yamaha OPL-SAx> at port
0x220-0x22f,0x530-0x537,0x388-0x38f,0x330-0x331,0x370-0x371 irq 5 drq 1,3 on
isa0
ad1: 15MB <SunDisk SDTB-128> [490/2/32] at ata0-slave using PIO1
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?014601bfa0aa$b69250f0$0bac2ac0>