Date: Thu, 08 Feb 2001 15:52:41 -0500 From: Mikel King <mikel@ocsinternet.com> To: Alan Gates <agates@eddinc.com> Cc: freebsd-questions@FreeBSD.ORG Subject: Re: SMC 1211TX Network Card Message-ID: <3A830719.1F448EEC@ocsinternet.com> References: <NCBBLOELEKFDIAOGLKFCEEPJGAAA.agates@eddinc.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Alan,
I have a large # of these deployed and have had to date not one single
problem...I've always gotten away with the default kernel settings even on my
custom kernels.
This is from one of my 4.2 systems.
rl0: <Accton MPX 5030/5038 10/100BaseTX> port 0x1400-0x14ff mem
0xfa001000-0xfa0010ff irq 15 at device 8.0 on pci0
rl0: Ethernet address: 00:e0:29:6f:73:04
miibus0: <MII bus> on rl0
I hope this helps. One thought is to check the system board's bios and
make sure that pnp os is off...
cheers,
mikel
Alan Gates wrote:
> I have just installed FreeBSD 4.2 on a system. I have added an SMC 1211TX
> PCI network card to the system but the system does not seem to be able to
> make use of it. Looking at the output of dmesg I see:
>
> rl0: <Accton MPX 5030/5038 10/100BaseTX> at device 11.0 on pci1
> rl0: couldn't map ports/memory
> device_probe_and_attach: rl0 attach returned 6
>
> I am assuming that the system could not determine the irq, mem and i/o
> settings for the card. How can I overcome this issue.
>
> Thanks in advance!
>
> Alan
>
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-questions" in the body of the message
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3A830719.1F448EEC>