Date: Fri, 14 Aug 1998 23:01:13 -0500 (CDT) From: Jason Godfrey <godfreja@dalamar.cs.uwec.edu> To: freebsd-questions@FreeBSD.ORG Subject: ATAPI CD-ROM partially detected Message-ID: <Pine.LNX.3.96.980814225227.8407A-100000@dalamar.cs.uwec.edu>
next in thread | raw e-mail | index | archive | help
Hello. I just bought a new IDE CD-ROM to replace my old flakey one that didn't work with FreeBSD 2.2.6 at all. This new one is an improvement over the old one, but I'm still having problems. The CD-ROM is right now configured as a slave on the primary controller, but I had the same results when it was the master on the secondary. On boot I get the following: fd0: 1.44MB 3.5in wdc0 at 0x1f0-0x1f7 irq 14 on isa wdc0: unit 0 (wd0): <ST32132A> wd0: 2015MB (4127760 sectors), 4095 cyls, 16 heads, 63 S/T, 512 B/S wdc0: unit 1 (atapi): <WPI CDS-32X/ERf 2.0>, removable, dma, iordy wdc1 not found at 0x170 npx0 flags 0x1 on motherboard This is more then I got with my old drive, but I expect some sort of message about wcd0. When I try to mount I get: vroom# mount -t cd9660 /dev/wcd0c /mnt cd9660: /dev/wcd0c: Input/output error I have wcd0 and wc1 configured in the kernel, as well as ATAPI and ATAPI_STATIC. Does anyone have any ideas? I would appreciate any help. Thanks -- Jason To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.LNX.3.96.980814225227.8407A-100000>