Date: Fri, 05 Jan 2001 16:16:57 +0100 From: Miroslav Kes <mkes@ra.rockwell.com> To: freebsd-questions@FreeBSD.ORG Subject: ad and acd not detected during 4.2 installation Message-ID: <3A55E569.8070405@ra.rockwell.com>
next in thread | raw e-mail | index | archive | help
HI. I have Toshiba Tecra 740CDT which currently runs 4.1 RELEASE (see dmesg output bellow). Now I tried to install 4.2 RELEASE, starting from flopies. Both ata controllers are detected OK but neither harddrive or CD are found. Does anybody have any idea what's going wrong? Thanks. Mira Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.1-RELEASE #0: Tue Sep 12 12:25:17 CEST 2000 root@odysseus.cze.ra.rockwell.com:/usr/src/sys/compile/LOCAL Timecounter "i8254" frequency 1193182 Hz CPU: Pentium/P55C (166.19-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x544 Stepping = 4 Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX> real memory = 50462720 (49280K bytes) avail memory = 45883392 (44808K bytes) pnpbios: Bad PnP BIOS data checksum Preloaded elf kernel "kernel" at 0xc0337000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc033709c. Intel Pentium detected, installing workaround for F00F bug md0: Malloc disk npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pci0: <Chips & Technologies 65554 SVGA controller> at 4.0 isa0: <ISA bus> on motherboard fdc0: <NEC 765 or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0 ata1 at port 0x170-0x177,0x376 irq 15 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model GlidePoint, device ID 0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> pcic0: <Intel i82365> at port 0x3e0 iomem 0xd0000 irq 10 on isa0 pcic0: management irq 10 pccard0: <PC Card bus -- kludge version> on pcic0 pccard1: <PC Card bus -- kludge version> on pcic0 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold ppi0: <Parallel I/O> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port plip0: <PLIP network interface> on ppbus0 pcm0: <CS4232> at port 0x530-0x537 irq 10 drq 1 flags 0xa100 on isa0 device_probe_and_attach: pcm0 attach returned 6 ad0: 2937MB <TOSHIBA MK3003MAN> [5968/16/63] at ata0-master using BIOSPIO acd0: CDROM <TOSHIBA CD-ROM XM-1502BN> at ata1-master using BIOSPIO Mounting root from ufs:/dev/ad0s1a pccard: card inserted, slot 0 pccard: card inserted, slot 1 ep0: <3Com Etherlink III 3C589> at port 0x240-0x24f irq 3 slot 0 on pccard0 ep0: Ethernet address 00:60:97:cd:62:c5 sio2 at port 0x2f8-0x2ff irq 5 slot 1 on pccard1 sio2: type 16550A To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3A55E569.8070405>