Date: Mon, 13 Jun 2005 21:04:48 +0100 From: John McAree <john@mcaree.org> To: freebsd-usb@freebsd.org Subject: USB Optical Mouse Message-ID: <20050613200448.GA7449@netsoc.ucd.ie>
next in thread | raw e-mail | index | archive | help
--envbJBWh7q8WU6mo Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Hi all, I have a Logitech Cordless MouseMan Optical mouse, with keyboard (I think it's called the MouseMan Duo, but I can't find it in Logitech's current Products). Anyway, the duo works fine in A Certain Other Operating System that doesn't end in "ix" or "ux". However, I've had nothing but disappointment trying to get them working in FreeBSD. I'm currently running 5.4, the keyboard works perfectly, and has done in every version since 5.2.1 (I think this was the earliest I tried them in). There is a receiver that connects to my USB port, this is picked up fine by the kernel on boot: ukbd0: Logitech USB Receiver, rev 1.10/17.11, addr 2, iclass 3/1 kbd0 at ukbd0 ums0: Logitech USB Receiver, rev 1.10/17.11, addr 2, iclass 3/1 ums0: 7 buttons and Z dir. So, looks good there. I have tried various combinations of moused_enable and usbd_enable in /etc/rc.conf. From my understanding of reading various list archives a while back, moused_enable should be "NO", and usbd_enable should be "YES", since usbd will start moused. I came upon this PR today: http://www.freebsd.org/cgi/query-pr.cgi?pr=62088 I went and compiled a custom kernel (machine only installed over the weekend) and enabled device ehci, options USB_DEBUG, and set "hw.usb.ums.debug=11" in /etc/sysctl.conf, and have output from various mouse-y operations. Can anyone assist please? I'll buy a shiny pint of Irish Guinness (and possibly a cheap trinket) for anyone who can help! I've attached my dmesg output, kernel config file, xorg.conf and the console output from the mouse. Thanks in advance, John. -- I wear the cheese; It does not wear me. --envbJBWh7q8WU6mo Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename=dmesg Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.4-RELEASE-p2 #0: Mon Jun 13 20:30:04 IST 2005 root@chimaera:/usr/src/sys/i386/compile/CHIMAERA ACPI APIC Table: <DELL 4300 > Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) 4 CPU 1700MHz (1694.51-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf0a Stepping = 10 Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM> real memory = 804745216 (767 MB) avail memory = 781942784 (745 MB) ioapic0: Changing APIC ID to 1 ioapic0 <Version 2.0> irqs 0-23 on motherboard npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <DELL 4300 > on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <Intel 82845 host to AGP bridge> mem 0xe8000000-0xefffffff at device 0.0 on pci0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pci2: <simple comms> at device 8.0 (no driver attached) ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xfe1ef000-0xfe1effff irq 19 at device 9.0 on pci2 usb0: OHCI version 1.0, legacy support usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0 usb0: USB revision 1.0 usbd_get_string: getting lang failed, using 0 uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ohci1: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xfe1ee000-0xfe1eefff irq 19 at device 9.1 on pci2 usb1: OHCI version 1.0, legacy support usb1: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci1 usb1: USB revision 1.0 usbd_get_string: getting lang failed, using 0 uhub1: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe1edc00-0xfe1edcff irq 18 at device 9.3 on pci2 usb2: EHCI version 1.0 usb2: companion controllers, 2 ports each: usb0 usb1 usb2: <EHCI (generic) USB 2.0 controller> on ehci0 usb2: USB revision 2.0 uhub2: AcerLabs EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub2: 6 ports with 6 removable, self powered fwohci0: <1394 Open Host Controller Interface> mem 0xfe1ed000-0xfe1ed7ff irq 16 at device 9.4 on pci2 fwohci0: OHCI version 1.10 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:90:e6:05:18:00:00:fe fwohci0: Phy 1394a available S400, 3 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:90:e6:00:00:fe fwe0: Ethernet address: 02:90:e6:00:00:fe fwe0: if_start running deferred for Giant fwohci0: Initiate bus reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) rl0: <RealTek 8139 10/100BaseTX> port 0xe800-0xe8ff mem 0xfe1ed800-0xfe1ed8ff irq 19 at device 10.0 on pci2 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: Ethernet address: 00:40:f4:4d:6d:a4 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH2 UDMA100 controller> port 0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xff80-0xff9f irq 19 at device 31.2 on pci0 uhci0: LegSup = 0x001b usb3: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0 usb3: USB revision 1.0 usbd_get_string: getting lang failed, using 0 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered pci0: <serial bus, SMBus> at device 31.3 (no driver attached) uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xff60-0xff7f irq 23 at device 31.4 on pci0 uhci1: LegSup = 0x0010 usb4: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1 usb4: USB revision 1.0 usbd_get_string: getting lang failed, using 0 uhub4: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub4: 2 ports with 2 removable, self powered pci0: <multimedia, audio> at device 31.5 (no driver attached) fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A ppc0: <ECP parallel printer port> port 0x778-0x77f,0x378-0x37f irq 7 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xcd000-0xcffff,0xc0000-0xccfff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 device_attach: atkbd0 attach returned 6 sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled ugen0: Logitech Camera, rev 2.00/1.00, addr 2 ukbd0: Logitech USB Receiver, rev 1.10/17.11, addr 2, iclass 3/1 kbd0 at ukbd0 ums0: Logitech USB Receiver, rev 1.10/17.11, addr 2, iclass 3/1 ums0: 7 buttons and Z dir. Timecounter "TSC" frequency 1694510144 Hz quality 800 Timecounters tick every 10.000 msec ad0: 76293MB <WDC WD800BB-75DKA0/77.07W77> [155009/16/63] at ata0-master UDMA100 ad1: 57220MB <Maxtor 5T060H6/TAH71DP0> [116257/16/63] at ata0-slave UDMA100 acd0: DVDROM <SAMSUNG DVD-ROM SD-616/F000DEL> at ata1-master PIO4 acd1: CDRW <NEC CD-RW NR-7800A/1.0B> at ata1-slave PIO4 Mounting root from ufs:/dev/ad1s1a --envbJBWh7q8WU6mo Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename=mouse Moving mouse: ums_intr: sc=0xc1c30000 status=0 ums_intr: data = 01 00 f8 03 00 00 Button 1: ums_intr: sc=0xc1c30000 status=0 ums_intr: data = 01 01 00 00 00 00 ums_intr: sc=0xc1c30000 status=0 ums_intr: data = 01 00 00 00 00 00 Button 2: ums_intr: sc=0xc1c30000 status=0 ums_intr: data = 01 02 00 00 00 00 ums_intr: sc=0xc1c30000 status=0 ums_intr: data = 01 00 00 00 00 00 Wheel button: ums_intr: sc=0xc1c30000 status=0 ums_intr: data = 01 04 00 00 00 00 ums_intr: sc=0xc1c30000 status=0 ums_intr: data = 01 00 00 00 00 00 Thumb button: ums_intr: sc=0xc1c30000 status=0 ums_intr: data = 01 08 00 00 00 00 ums_intr: sc=0xc1c30000 status=0 ums_intr: data = 01 00 00 00 00 00 Wheel up: ums_intr: sc=0xc1c30000 status=0 ums_intr: data = 01 00 00 00 01 00 Wheel down: ums_intr: sc=0xc1c30000 status=0 ums_intr: data = 01 00 00 00 ff 00 --envbJBWh7q8WU6mo Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename=CHIMAERA # # CHIMAERA - Custom kernel config for CHIMAERA machine i386 cpu I686_CPU ident CHIMAERA # To statically compile in device wiring instead of /boot/device.hints #hints "GENERIC.hints" # Default places to look for devices. options SCHED_4BSD # 4BSD scheduler options INET # InterNETworking options INET6 # IPv6 communications protocols options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options MD_ROOT # MD is a potential root device #options NFSCLIENT # Network Filesystem Client #options NFSSERVER # Network Filesystem Server #options NFS_ROOT # NFS usable as /, requires NFSCLIENT options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options GEOM_GPT # GUID Partition Tables. options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] options COMPAT_FREEBSD4 # Compatible with FreeBSD4 options SCSI_DELAY=15000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options AHC_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~128k to driver. options AHD_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~215k to driver. options ADAPTIVE_GIANT # Giant mutex is adaptive. options USB_DEBUG # I'd like some debugging information, please device apic # I/O APIC # Bus support. Do not remove isa, even if you have no isa slots device isa device eisa device pci # Floppy drives device fdc # ATA and ATAPI devices device ata device atadisk # ATA disk drives #device ataraid # ATA RAID drives device atapicd # ATAPI CDROM drives device atapifd # ATAPI floppy drives #device atapist # ATAPI tape drives options ATA_STATIC_ID # Static device numbering # SCSI Controllers #device ahb # EISA AHA1742 family #device ahc # AHA2940 and onboard AIC7xxx devices #device ahd # AHA39320/29320 and onboard AIC79xx devices #device amd # AMD 53C974 (Tekram DC-390(T)) #device isp # Qlogic family #device mpt # LSI-Logic MPT-Fusion #device ncr # NCR/Symbios Logic #device sym # NCR/Symbios Logic (newer chipsets + those of `ncr') #device trm # Tekram DC395U/UW/F DC315U adapters #device adv # Advansys SCSI adapters #device adw # Advansys wide SCSI adapters #device aha # Adaptec 154x SCSI adapters #device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60. #device bt # Buslogic/Mylex MultiMaster SCSI adapters #device ncv # NCR 53C500 #device nsp # Workbit Ninja SCSI-3 #device stg # TMC 18C30/18C50 # SCSI peripherals device scbus # SCSI bus (required for SCSI) #device ch # SCSI media changers device da # Direct Access (disks) #device sa # Sequential Access (tape etc) device cd # CD device pass # Passthrough device (direct SCSI access) #device ses # SCSI Environmental Services (and SAF-TE) # RAID controllers interfaced to the SCSI subsystem #device amr # AMI MegaRAID #device arcmsr # Areca SATA II RAID #device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID #device ciss # Compaq Smart RAID 5* #device dpt # DPT Smartcache III, IV - See NOTES for options #device hptmv # Highpoint RocketRAID 182x #device iir # Intel Integrated RAID #device ips # IBM (Adaptec) ServeRAID #device mly # Mylex AcceleRAID/eXtremeRAID #device twa # 3ware 9000 series PATA/SATA RAID # RAID controllers #device aac # Adaptec FSA RAID #device aacp # SCSI passthrough for aac (requires CAM) #device ida # Compaq Smart RAID #device mlx # Mylex DAC960 family #device pst # Promise Supertrak SX6000 #device twe # 3ware ATA RAID # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc # AT keyboard controller device atkbd # AT keyboard device psm # PS/2 mouse device vga # VGA video card driver device splash # Splash screen and screen saver support # syscons is the default console driver, resembling an SCO console device sc # Enable this for the pcvt (VT220 compatible) console driver #device vt #options XSERVER # support for X server on a vt console #options FAT_CURSOR # start with block cursor device agp # support several AGP chipsets # Floating point support - do not disable. device npx # Power management support (see NOTES for more options) #device apm # Add suspend/resume support for the i8254. device pmtimer # PCCARD (PCMCIA) support # PCMCIA and cardbus bridge support #device cbb # cardbus (yenta) bridge #device pccard # PC Card (16-bit) bus #device cardbus # CardBus (32-bit) bus # Serial (COM) ports device sio # 8250, 16[45]50 based serial ports # Parallel port device ppc device ppbus # Parallel port bus (required) device lpt # Printer device plip # TCP/IP over parallel device ppi # Parallel port interface device #device vpo # Requires scbus and da # If you've got a "dumb" serial or parallel PCI card that is # supported by the puc(4) glue driver, uncomment the following # line to enable it (connects to the sio and/or ppc drivers): #device puc # PCI Ethernet NICs. #device de # DEC/Intel DC21x4x (``Tulip'') #device em # Intel PRO/1000 adapter Gigabit Ethernet Card #device ixgb # Intel PRO/10GbE Ethernet Card #device txp # 3Com 3cR990 (``Typhoon'') #device vx # 3Com 3c590, 3c595 (``Vortex'') # PCI Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! device miibus # MII bus support #device bfe # Broadcom BCM440x 10/100 Ethernet #device bge # Broadcom BCM570xx Gigabit Ethernet #device dc # DEC/Intel 21143 and various workalikes #device fxp # Intel EtherExpress PRO/100B (82557, 82558) #device lge # Level 1 LXT1001 gigabit ethernet #device nge # NatSemi DP83820 gigabit ethernet #device pcn # AMD Am79C97x PCI 10/100 (precedence over 'lnc') #device re # RealTek 8139C+/8169/8169S/8110S device rl # RealTek 8129/8139 #device sf # Adaptec AIC-6915 (``Starfire'') #device sis # Silicon Integrated Systems SiS 900/SiS 7016 #device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet #device ste # Sundance ST201 (D-Link DFE-550TX) #device ti # Alteon Networks Tigon I/II gigabit Ethernet #device tl # Texas Instruments ThunderLAN #device tx # SMC EtherPower II (83c170 ``EPIC'') #device vge # VIA VT612x gigabit ethernet #device vr # VIA Rhine, Rhine II #device wb # Winbond W89C840F #device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') # ISA Ethernet NICs. pccard NICs included. #device cs # Crystal Semiconductor CS89x0 NIC # 'device ed' requires 'device miibus' #device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards #device ex # Intel EtherExpress Pro/10 and Pro/10+ #device ep # Etherlink III based cards #device fe # Fujitsu MB8696x based cards #device ie # EtherExpress 8/16, 3C507, StarLAN 10 etc. #device lnc # NE2100, NE32-VL Lance Ethernet cards #device sn # SMC's 9000 series of Ethernet chips #device xe # Xircom pccard Ethernet # ISA devices that use the old ISA shims #device le # Wireless NIC cards device wlan # 802.11 support device an # Aironet 4500/4800 802.11 wireless NICs. device awi # BayStack 660 and others device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs. #device wl # Older non 802.11 Wavelan wireless NIC. # Pseudo devices. device loop # Network loopback device mem # Memory and kernel memory devices device io # I/O device device random # Entropy device device ether # Ethernet support device sl # Kernel SLIP device ppp # Kernel PPP device tun # Packet tunnel. device pty # Pseudo-ttys (telnet etc) device md # Memory "disks" device gif # IPv6 and IPv4 tunneling device faith # IPv6-to-IPv4 relaying (translation) # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! # Note that 'bpf' is required for DHCP. device bpf # Berkeley packet filter # USB support device uhci # UHCI PCI->USB interface device ohci # OHCI PCI->USB interface device ehci # EHCI PCI->USB interface (USB 2.0) device usb # USB Bus (required) #device udbp # USB Double Bulk Pipe devices device ugen # Generic device uhid # "Human Interface Devices" device ukbd # Keyboard device ulpt # Printer device umass # Disks/Mass storage - Requires scbus and da device ums # Mouse device urio # Diamond Rio 500 MP3 player device uscanner # Scanners # USB Ethernet, requires mii #device aue # ADMtek USB Ethernet #device axe # ASIX Electronics USB Ethernet #device cdce # Generic USB over Ethernet #device cue # CATC USB Ethernet #device kue # Kawasaki LSI USB Ethernet #device rue # RealTek RTL8150 USB Ethernet # FireWire support device firewire # FireWire bus code device sbp # SCSI over FireWire (Requires scbus and da) device fwe # Ethernet over FireWire (non-standard!) device sound # Sound card support --envbJBWh7q8WU6mo Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="xorg.conf" Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" RgbPath "/usr/X11R6/lib/X11/rgb" ModulePath "/usr/X11R6/lib/modules" FontPath "/usr/X11R6/lib/X11/fonts/misc/" FontPath "/usr/X11R6/lib/X11/fonts/TTF/" FontPath "/usr/X11R6/lib/X11/fonts/Type1/" FontPath "/usr/X11R6/lib/X11/fonts/CID/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" EndSection Section "Module" Load "extmod" Load "glx" Load "dri" Load "dbe" Load "record" Load "xtrap" Load "type1" Load "freetype" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/sysmouse" #Option "Device" "/dev/ums0" EndSection Section "Monitor" #DisplaySize 310 230 # mm Identifier "Monitor0" VendorName "DEL" ModelName "DELL E771a" ### Uncomment if you don't want to default to DDC: # HorizSync 30.0 - 70.0 # VertRefresh 50.0 - 160.0 Option "DPMS" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz" ### [arg]: arg optional #Option "SWcursor" # [<bool>] #Option "HWcursor" # [<bool>] #Option "NoAccel" # [<bool>] #Option "ShadowFB" # [<bool>] #Option "UseFBDev" # [<bool>] #Option "Rotate" # [<str>] #Option "VideoKey" # <i> #Option "FlatPanel" # [<bool>] #Option "FPDither" # [<bool>] #Option "CrtcNumber" # <i> #Option "FPScale" # [<bool>] #Option "FPTweak" # <i> Identifier "Card0" Driver "nv" VendorName "nVidia Corporation" BoardName "NV11 [GeForce2 MX/MX 400]" BusID "PCI:1:0:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 1 EndSubSection SubSection "Display" Viewport 0 0 Depth 4 EndSubSection SubSection "Display" Viewport 0 0 Depth 8 EndSubSection SubSection "Display" Viewport 0 0 Depth 15 EndSubSection SubSection "Display" Viewport 0 0 Depth 16 EndSubSection SubSection "Display" Viewport 0 0 Depth 24 Modes "1152x864" EndSubSection EndSection --envbJBWh7q8WU6mo--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20050613200448.GA7449>