Date: Fri, 17 Jul 1998 09:28:15 -0500 (CDT) From: Satwant <satwant@lachman.com> To: John Derk <johnderk@infoserve.net> Cc: freebsd-questions <freebsd-questions@FreeBSD.ORG> Subject: Re: Configuring ppp/modem Message-ID: <Pine.GSO.3.96.980717092558.2306G-100000@satwant.lachman.com> In-Reply-To: <35AEF43D.F129A4E9@infoserve.net>
next in thread | previous in thread | raw e-mail | index | archive | help
I am having similar problems with my internal modem as well. In my case
not only does ppp not work, but even at boot time, my system says
"sio1 not found" .
Do a "dmesg | grep sio" to look for a similar message.
I am sorry I am not giving a solution, just relating my experience.
-Satwant.
On Thu, 16 Jul 1998, John Derk wrote:
>
>
> Hi. I'm working on configuring my pc in dualboot fashion: Windows 95 and
> FreeBSD. I'm currently trying to set up my system for dialup internet
> access.
>
> I did the best I could, referring to the Pedantic PPP Primer (the
> section "Configuring the PPP Dial-Out Connection") and the user-ppp
> section of the FreeBSD Handbook.
>
> The modem is a USR Sportster 33.6 (internal faxmodem, model 840)
> assigned to com 3/irq 5.
>
> My /etc/ppp/ppp.conf file, included below, is based on the example in
> the Pedantic Primer.
>
> I try to dial my isp with the following commands:
> ppp
> dial interactive
> but with no success. The program tries to dial, fails, and retries, ten
> times. Error message is this: "Warning: DialModem: dial failed."
>
> Any ideas how to get this thing to work?
>
> Thanks.
> John Derk <johnderk@infoserve.net>
>
>
>
>
>
> ###############################################################
> # PPP Configuration File ('/etc/ppp/ppp.conf')
> #
> # Default settings; These are always executed when PPP is
> # is invoked and apply to all system configurations.
> ###############################################################
> default:
> set device /dev/cuaa2
> set speed 115200
> disable pred1
> deny pred1
> disable lqr
> deny lqr
> set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \"\" ATE1Q0M0
> OK-AT-OK\\dATDT\\T TIMEOUT 40 CONNECT"
> set redial 3 10
> #
> #
> ##############################################################
> #
> # For interactive mode use this configuration:
> #
> # Invoke with `ppp -alias interactive'
> #
> ##############################################################
> interactive:
> set authname johnderk
> set authkey in4serve
> set phone 638-8000
> set timeout 300
> set openmode active
> accept chap
> #
> ##############################################################
> #
> # For demand-dial (automatic) mode, we'll use this configuration:
> #
> # Invoke with: `ppp -auto -alias demand'
> #
> ##############################################################
> demand:
> set authname johnderk
> set authkey in4serve
> set phone 638-8000
> set timeout 300
> set openmode active
> accept chap
> set ifaddr 127.1.1.1/0 199.175.157.2/0 255.255.255.0
> add 0 0 199.175.157.2
> #############################################################
> # End of /etc/ppp/ppp.conf
>
>
>
>
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-questions" in the body of the message
>
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.GSO.3.96.980717092558.2306G-100000>