Date: Mon, 3 Sep 2001 23:49:45 -0500 From: Alfred Perlstein <bright@mu.org> To: current@freebsd.org Cc: cg@freebsd.org, msmith@freebsd.org Subject: sound doesn't work with acpi? Message-ID: <20010903234945.U81307@elvis.mu.org>
next in thread | raw e-mail | index | archive | help
I just booted a fresh -current yesterday and everything seems fine except that pcm now displays: pcm0: unable to map register space here's a full dmesg, dmesg -v or any other assistance needed to diagnose this further will be provided as quickly as possible if required. sorry for the verbose output, it's cardbus being chatty. :) I think Mike Smith mentioned several months ago that this was to be expected, however I was wondering if there was anything I could do to fix it? The laptop is a Dell Latitude, an older model. thanks! Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-CURRENT #0: Mon Sep 3 03:20:36 PDT 2001 bright@lappy.reserved:/usr/obj/usr/src/sys/lappy Timecounter "i8254" frequency 1193182 Hz CPU: Pentium II/Pentium II Xeon/Celeron (297.79-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x66a Stepping = 10 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> real memory = 134152192 (131008K bytes) avail memory = 125173760 (122240K bytes) Preloaded elf kernel "kernel" at 0xc0514000. Preloaded elf module "if_wi.ko" at 0xc051409c. Preloaded elf module "acpi.ko" at 0xc051413c. Pentium Pro MTRR support enabled Using $PIR table, 5 entries at 0xc00fbd20 apm0: <APM BIOS> on motherboard apm0: found APM BIOS v1.2, connected at v1.2 npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <DELL CPi A > on motherboard Timecounter "ACPI" frequency 3579545 Hz acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_tz0: <thermal zone> on acpi0 acpi_acad0: <AC adapter> on acpi0 acpi_cmbat0: <Control method Battery> on acpi0 acpi_cmbat1: <Control method Battery> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 acpi_pcib0: <Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <PCI bus> on acpi_pcib0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) pcm0: unable to map register space pci1: <multimedia, audio> at device 0.1 (no driver attached) pccbb0: <TI1225 PCI-CardBus Bridge> irq 11 at device 3.0 on pci0 pccbb0: PCI Memory allocated: 10000000 cardbus0: <Cardbus bus (newcard)> on pccbb0 pccard0: <16-bit PCCard bus> on pccbb0 pccbb1: <TI1225 PCI-CardBus Bridge> irq 11 at device 3.1 on pci0 pccbb1: PCI Memory allocated: 10001000 cardbus1: <Cardbus bus (newcard)> on pccbb1 pccard1: <16-bit PCCard bus> on pccbb1 isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0x860-0x86f at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xece0-0xecff irq 11 at device 7.2 on pci0 usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached) atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 fdc0: <NEC 72065B or clone> port 0x3f7,0x3f2-0x3f5 irq 6 on acpi0 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A ppc0 port 0x778-0x77b,0x378-0x37f irq 7 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0 sc0: <System console> on isa0 sc0: VGA <16 virtual consoles, flags=0x200> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 pmtimer0 on isa0 IP packet filtering initialized, divert enabled, rule-based forwarding disabled, default to deny, logging disabled acpi_cpu0: set speed to 100.0% acpi_cpu: CPU throttling enabled, 8 steps from 100% to 12.5% ad0: 4645MB <IBM-DBCA-204860> [10068/15/63] at ata0-master UDMA33 Mounting root from ufs:/dev/ad0s1a cardbus0: detach_card: no card to detach! pccbb0: pccbb_power: CARD_VCC_0V and CARD_VPP_0V [44] pccbb1: card inserted: event=0x00000000, state=30000410 pccard1: chip_socket_enable pccbb_pcic_socket_enable: pccbb1: pccbb_power: CARD_VCC_0V and CARD_VPP_0V [44] pccbb1: pccbb_power: CARD_VCC_5V and CARD_VPP_VCC [15] pccbb1: pccbb_pcic_wait_ready: status 0x6d pccbb1: card type is mem pccard1: read_cis pccbb_pcic_mem_map window 0 bus 10002000+400+efffe000 card addr 0 pccbb_pcic_do_mem_map window 0: 8002 8002 3ffe 10 (10002000+00000400.00001000*efffe000) pccbb_pcic_do_mem_map window 0: 8002 8002 7ffe 10 (10002000+00000400.00001000*efffe000) cis mem map cb1a7000 pccard1: CIS tuple chain: CISTPL_DEVICE type=null speed=null 01 03 00 00 ff CISTPL_DEVICE_A type=sram speed=ext 17 04 67 5a 08 ff unhandled CISTPL 1d 1d 05 01 67 5a 08 ff CISTPL_VERS_1 15 50 05 00 41 64 64 74 72 6f 6e 00 41 57 50 2d 31 30 30 20 57 69 72 65 6c 65 73 73 20 50 43 4d 43 49 41 00 56 65 72 73 69 6f 6e 20 30 31 2e 30 32 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff CISTPL_MANFID 20 04 56 01 02 00 CISTPL_FUNCID 21 02 06 00 CISTPL_FUNCE 22 02 01 07 CISTPL_FUNCE 22 05 02 40 42 0f 00 CISTPL_FUNCE 22 05 02 80 84 1e 00 CISTPL_FUNCE 22 05 02 60 ec 53 00 CISTPL_FUNCE 22 05 02 c0 d8 a7 00 CISTPL_FUNCE 22 02 03 07 CISTPL_FUNCE 22 08 04 06 00 90 d1 07 4e 22 CISTPL_FUNCE 22 02 05 01 CISTPL_CONFIG 1a 07 03 01 e0 03 00 00 01 CISTPL_CFTABLE_ENTRY 1b 0f c1 01 19 76 c5 4b d5 19 36 36 05 46 7f ff ff CISTPL_END ff pccard1: check_cis_quirks pccard1: CIS version PC Card Standard 5.0 pccard1: CIS info: Addtron, AWP-100 Wireless PCMCIA, Version 01.02, pccard1: Manufacturer code 0x156, product 0x2 pccard1: function 0: network adapter, ccr addr 3e0 mask 1 pccard1: function 0, config table entry 1: I/O card; irq mask ffff; iomask 6, iospace 0-3f; rdybsy_active wp_active bvd_active io16 irqpulse irqlevel pccard1: functions scanning pccbb_pcic_socket_enable: pccbb1: pccbb_power: CARD_VCC_0V and CARD_VPP_0V [44] pccbb1: pccbb_power: CARD_VCC_5V and CARD_VPP_VCC [15] pccbb1: pccbb_pcic_wait_ready: status 0x6d pccbb1: card type is io pccbb_pcic_mem_map window 0 bus 10002000+400+efffe000 card addr 0 pccbb_pcic_do_mem_map window 0: 8002 8002 3ffe 10 (10002000+00000400.00001000*efffe000) pccard1: ccr_res == 10002000-100023ff, base=3e0 pccbb_pcic_do_mem_map window 0: 8002 8002 7ffe 10 (10002000+00000400.00001000*efffe000) pccbb_pcic_do_mem_map window 0: 8002 8002 7ffe 10 (10002000+00000400.00001000*efffe000) pccard1: function 0 CCR at 0 offset 3e0: 41 80 22 ff, ff ff ff ff, ff wi0: <WaveLAN/IEEE> at port 0x100-0x13f irq 11 function 0 config 1 on pccard1 pccbb_pcic_io_map window 0 auto port 100+40 pccbb_pcic_do_io_map window 0: 0100 013f (00000100+00000040) pccbb_pcic_io_map window 0 auto port 100+40 pccbb_pcic_do_io_map window 0: 0100 013f (00000100+00000040) wi0: Ethernet address: 00:90:d1:07:4e:22 pccard1: function 0 CCR at 0 offset 3e0: 45 80 22 ff, ff ff ff ff, ff -- -Alfred Perlstein [alfred@freebsd.org] 'Instead of asking why a piece of software is using "1970s technology," start asking why software is ignoring 30 years of accumulated wisdom.' '"Java" developer, like "special" Olympics, right?' - Bill Paul To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010903234945.U81307>