Date: Sat, 1 Apr 2000 08:47:59 -0500 From: "Jim Freeze" <jim@freeze.org> To: "FreeBSD Questions" <freebsd-questions@FreeBSD.ORG> Subject: Need Help with Panic! Message-ID: <010a01bf9be0$e54754a0$cf6ec8d0@lexmark.com>
next in thread | raw e-mail | index | archive | help
Can anyone help me figure out why my system is panic'ing? I have finally been able to reproduce the problem. If I choose several packages to install via cdrom, the system will panic and automatically reboot. Below are the panics that I have been able to generate from simply selecting several packages and installing them from the cd with /stand/sysinstall. (I have paraphrased the errors since I couldn't write them down fast enough and I don't know where to find them if they are logged.) 1) panic: page fault synching disks 133 133 133 ...... 2) panic: ffs_valloc valloc failed synching disks ... Also, I was able to generate the following panic by doing a control C while copying from the cdrom to my hard drive. 3) Fatal Trap 12: page fault in kernel mode fault mode: supervisor write, page does not exist(or something like that) Some comments: 1) The panics seem to occur when the cd is operationing 2) The panics seem to occur when the cd is at its maximum speed. The cd is variable speed. I can tell by the pitch changes is makes. Here are some system specs: uname -a FreeBSD urim 3.4-RELEASE FreeBSD 3.4-RELEASE #0: Thu Dec 30 02:57:15 GMT 1999 jkh@highwing.cdrom.com:/usr/src/sys/compile/GENERIC i386 CPU: AMD K6-2 450MHz RAM: 64MB SDRAM CDROM: - 50X - EPO - no name brand with ultra-DMA 33 Drive: Western Digital - Ultra ATA/66 - 10.2GB ---dmesg--- Copyright (c) 1992-1999 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 3.4-RELEASE #0: Thu Dec 30 02:57:15 GMT 1999 jkh@highwing.cdrom.com:/usr/src/sys/compile/GENERIC Timecounter "i8254" frequency 1193182 Hz CPU: AMD-K6(tm) 3D processor (451.03-MHz 586-class CPU) Origin = "AuthenticAMD" Id = 0x58c Stepping = 12 Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX> AMD Features=0x80000800<SYSCALL,3DNow!> real memory = 67108864 (65536K bytes) config> di zp0 config> di ze0 config> di lnc0 config> di le0 config> di ie0 config> di fe0 config> di ed0 config> di cs0 config> di wt0 config> di scd0 config> di mcd0 config> en ex0 config> f ex0 0 config> q avail memory = 61747200 (60300K bytes) Preloaded elf kernel "kernel" at 0xc035c000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc035c09c. Probing for devices on PCI bus 0: chip0: <VIA 82C597 (Apollo VP3) system controller> rev 0x04 on pci0.0.0 chip1: <VIA 82C598MVP (Apollo MVP3) PCI-PCI bridge> rev 0x00 on pci0.1.0 chip2: <VIA 82C586 PCI-ISA bridge> rev 0x47 on pci0.7.0 ide_pci0: <VIA 82C586x (Apollo) Bus-master IDE controller> rev 0x06 on pci0.7.1 chip3: <VIA 82C586B ACPI interface> rev 0x10 on pci0.7.3 vx0: <3COM 3C595 Fast Etherlink III PCI> rev 0x00 int a irq 10 on pci0.9.0 utp/tx[*utp*]: disable 'auto select' with DOS util! address 00:60:97:4f:aa:a0 Probing for devices on PCI bus 1: vga0: <SiS model 6326 VGA-compatible display device> rev 0x92 on pci1.0.0 Probing for PnP devices: CSN 1 Vendor ID: ESS0003 [0x03007316] Serial 0xffffffff Comp ID: @@@0000 [0x00000000] Probing for devices on the ISA bus: sc0 on isa sc0: VGA color <16 virtual consoles, flags=0x0> atkbdc0 at 0x60-0x6f on motherboard atkbd0 irq 1 on isa psm0 irq 12 on isa psm0: model Generic PS/2 mouse, device ID 0 sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: FIFO enabled, 8 bytes threshold fd0: 1.44MB 3.5in wdc0 at 0x1f0-0x1f7 irq 14 on isa wdc0: unit 0 (wd0): <WDC WD102AA> wd0: 9787MB (20044080 sectors), 19885 cyls, 16 heads, 63 S/T, 512 B/S wdc1 at 0x170-0x177 irq 15 on isa wdc1: unit 0 (atapi): <E-IDE CD-ROM Max 50X/Ver6.40D>, removable, accel, dma, iordy acd0: drive speed 1375 - 8593KB/sec, 128KB cache acd0: supported read types: CD-R, CD-RW, CD-DA, packet track acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray acd0: Medium: CD-ROM 120mm data disc loaded, unlocked matcdc0 not found at 0x230 ppc0 at 0x378 irq 7 flags 0x40 on isa ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold lpt0: <generic printer> on ppbus 0 lpt0: Interrupt-driven port ppi0: <generic parallel i/o> on ppbus 0 plip0: <PLIP network interface> on ppbus 0 ep0 not found at 0x300 ex0 not found adv0 not found at 0x330 bt0 not found at 0x134 aha0 not found at 0x134 aic0 not found vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa npx0 on motherboard npx0: INT 16 interface changing root device to wd0s1a WARNING: / was not properly dismounted Thanks for any help!! ================== Jim D. Freeze jim@freeze.org ================== To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?010a01bf9be0$e54754a0$cf6ec8d0>