Date: Tue, 31 Oct 2006 18:16:16 -0500 From: Nicolas Blais <nb_root@videotron.ca> To: freebsd-usb@freebsd.org Subject: Can't use JMTek usbdrive Message-ID: <200610311816.22435.nb_root@videotron.ca>
next in thread | raw e-mail | index | archive | help
--nextPart2271763.3PH4dAJkFs Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Content-Disposition: inline When I plug my JMTek 1GB usb drive=20 (http://www.jmtek.com/products/usbdrivesm.html) I get the following message= s=20 on my console: umass0: <JMTek USBDrive2.0, class 0/0, rev 2.00/2.00, addr 2> on uhub4 umass0: SCSI over Bulk-Only; quirks =3D 0x0000 umass0:7:0:-1: Attached to scbus7 da0 at umass-sim0 bus 0 target 0 lun 0 da0: <JMTek USBDrive2.0 2.00> Removable Direct Access SCSI-2 device da0: 40.000MB/s transfers da0: Attempt to query device size failed: UNIT ATTENTION, Not ready to read= y=20 change, (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI Status: Check Condition (da0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0 (da0:umass-sim0:0:0:0): Not ready to ready change, medium may have changed (da0:umass-sim0:0:0:0): Retrying Command (per Sense Data) (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI Status: Check Condition (da0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0 (da0:umass-sim0:0:0:0): Not ready to ready change, medium may have changed (da0:umass-sim0:0:0:0): Retrying Command (per Sense Data) (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI Status: Check Condition (da0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0 (da0:umass-sim0:0:0:0): Not ready to ready change, medium may have changed (da0:umass-sim0:0:0:0): Retrying Command (per Sense Data) (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI Status: Check Condition (da0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0 (da0:umass-sim0:0:0:0): Not ready to ready change, medium may have changed (da0:umass-sim0:0:0:0): Retrying Command (per Sense Data) (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI Status: Check Condition (da0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0 (da0:umass-sim0:0:0:0): Not ready to ready change, medium may have changed (da0:umass-sim0:0:0:0): Retries Exhausted <SNIP X3> and usbdevs -v: Controller /dev/usb4: addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),=20 VIA(0x0000), rev 1.00 <snip> port 6 addr 2: high speed, power 200 mA, config 1, USBDrive2.0(0x2168),=20 JMTek(0x3606), rev 2.00 With that, there are no slices to mount. My other usb drives work fine in=20 =46reeBSD, only this one isn't working. Any suggestions?=20 Nicolas. =2D-=20 =46reeBSD 7.0-CURRENT #9: Tue Oct 31 15:44:23 EST 2006 =20 nicblais@clk01a:/usr/obj/usr/src/sys/CLK01A=20 PGP? : http://www.clkroot.net/security/nb_root.asc --nextPart2271763.3PH4dAJkFs Content-Type: application/pgp-signature -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (FreeBSD) iD8DBQBFR9lG4wTBlvcsbJURAg7QAJ9u8TnHsyDjBvMqj/WTLoaN7wd4pACfQutx PnArsIPy3u1nxGcjSeao040= =j+Rh -----END PGP SIGNATURE----- --nextPart2271763.3PH4dAJkFs--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200610311816.22435.nb_root>