Date: Thu, 7 Nov 2013 12:14:22 +0000 From: krad <kraduk@gmail.com> To: =?TIS-620?B?udLCwaekxcfUqq0g4LzXzaGi0g==?= =?TIS-620?B?xyAowNHKKQ==?= <mongkonwit_phu@winner.co.th> Cc: FreeBSD Questions <freebsd-questions@freebsd.org> Subject: Re: i have some problem Message-ID: <CALfReyf_o%2Bs-M%2Bi-qRN=rVeKDLCpdiar7rxLbLKYaYkyyVdEJw@mail.gmail.com> In-Reply-To: <20131107072833.d3a0d2ef@mail.winner.co.th> References: <20131107072833.d3a0d2ef@mail.winner.co.th>
next in thread | previous in thread | raw e-mail | index | archive | help
as other posts have said you are abstracted from the physical disks as you have a raid controller, therefore smart is unavailable directly from the os. The raid controller itself will monitor the drives health, which may or may not include smart. However to get this health information you will have to talk the the raid card. As you seem to have an LSI controller, try installing megacli and then have a loog at the following command MegaCli -PDList -aALL On 7 November 2013 07:28, =B9=D2=C2=C1=A7=A4=C5=C7=D4=AA=AD =E0=BC=D7=CD=A1= =A2=D2=C7 (=C0=D1=CA) < mongkonwit_phu@winner.co.th> wrote: > we use smartctl -a /dev/da0 > but can not check HDD so i would like to know about problem. > > Detail of smartctl 6.0 > > smartctl 6.0 2012-10-10 r3643 [FreeBSD 9.1-RELEASE amd64] (local build) > Copyright (coffee) 2002-12, Bruce Allen, Christian Franke, > www.smartmontools.org > > Vendor: LSI > Product: Logical Volume > Revision: 3000 > User Capacity: 291,999,055,872 bytes [291 GB] > Logical block size: 512 bytes > Logical Unit id: 0x600508e000000000848d5098fa521d01 > Device type: disk > Local Time is: Thu Nov 7 14:11:55 2013 ICT > Device does not support SMART > > Error Counter logging not supported > Device does not support Self Test logging > > we use raid card is pile 2008 setup raid 10 > > it is detail raid card > http://www.asus.com/Commercial_Servers_Workstations/PIKE_2008/ > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to " > freebsd-questions-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CALfReyf_o%2Bs-M%2Bi-qRN=rVeKDLCpdiar7rxLbLKYaYkyyVdEJw>