Date: Thu, 4 Apr 2002 12:56:49 -0500 (EST) From: David Rosario <david@rosariofamily.com> To: "Justin T. Gibbs" <gibbs@scsiguy.com> Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Adaptec 2920 doesn't appear in 'dmesg' Message-ID: <20020404125231.Y2931-100000@mail.rosariofamily.com> In-Reply-To: <200204041740.g34HeK967087@aslan.scsiguy.com>
next in thread | previous in thread | raw e-mail | index | archive | help
It's definitely a Future Domain chipset. Here's the output you requested: chip0@pci0:0:0: class=0x060000 card=0x00000000 chip=0x15951106 rev=0x03 hdr=0x00 fxp0@pci0:2:0: class=0x020000 card=0x000c8086 chip=0x12298086 rev=0x08 hdr=0x00 none0@pci0:3:0: class=0x010000 card=0x00000000 chip=0x00001036 rev=0x00 hdr=0x00 none1@pci0:4:0: class=0x030000 card=0x00000000 chip=0x43541002 rev=0x09 hdr=0x00 isab0@pci0:7:0: class=0x060100 card=0x00000000 chip=0x05861106 rev=0x31 hdr=0x00 atapci0@pci0:7:1: class=0x01018a card=0x00000000 chip=0x05711106 rev=0x06 hdr=0x00 uhci0@pci0:7:2: class=0x0c0300 card=0x12340925 chip=0x30381106 rev=0x02 hdr=0x00 chip1@pci0:7:3: class=0x000000 card=0x00000000 chip=0x30401106 rev=0x00 hdr=0x00 none2@pci0:15:0: class=0x030000 card=0x00000000 chip=0x89015333 rev=0x14 hdr=0x00 If you can tell me which SCSI card is garuanteed to work, I'll get it. I have two Tekram cards with NCR chipsets that prevent a complete bootup. After the "waiting for SCSI devices to settle" message, tons of stuff endlessly scrolls off the screen. Even though I see the NCR chips supported on the hardware list, there's probably something about Tekram's implementation that is broken (but both cards worked with RH 6.2 and 7.1). Thanks for the quick response. On Thu, 4 Apr 2002, Justin T. Gibbs wrote: > >I recently migrated a Compaq Deskpro 2000 5200MMX from RH Linux 6.2 to > >FreeBSD 4.5 and am having problems with the SCSI card. The card is an > >Adaptec 2920A, which should be supported. The hardware is fine because > >it's what I was using under Linux, just with a tape drive attached, for > >backups. > > > >When the machine boots, there are no messages relating to the card. > > ... > > Can you perform a "pciconf -l" on the system and post the output? > My guess is that the 2920A is actually a future domain controller > branded as an Adaptec product and so is not supported under FreeBSD. > Do you happen to recall what driver you used to attach to this card > under Linux? > > -- > Justin > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020404125231.Y2931-100000>