Date: Thu, 21 Jun 2001 16:54:41 -0400 From: tyler spivey <tspivey8@home.com> To: freebsd-questions@freebsd.org Subject: freebsd and plip - not working? Message-ID: <200106212054.f5LKsfe10296@home.com>
next in thread | raw e-mail | index | archive | help
(produced with comp(nmh) and ed(1)) :) bug: i can't use plip. it just won't work, i can't ping. fast: ifconfig lp0 10.0.0.1 10.0.0.2 slow: (linux yuck) ifconfig plip0 10.0.0.2 pointopoint 10.0.0.1 up here's my dmesg output (ignore the bad floppies at the end, i have piles of bad ones) Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.3-RELEASE #0: Sat Apr 21 10:54:49 GMT 2001 jkh@narf.osd.bsdi.com:/usr/src/sys/compile/GENERIC Timecounter "i8254" frequency 1193182 Hz CPU: Pentium/P55C (200.46-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x544 Stepping = 4 Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX> real memory = 67108864 (65536K bytes) config> di aic0 config> di lnc0 config> q avail memory = 60981248 (59552K bytes) Preloaded elf kernel "kernel" at 0xc044d000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc044d09c. Intel Pentium detected, installing workaround for F00F bug md0: Malloc disk npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 isab0: <Intel 82371AB PCI to ISA bridge> at device 1.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0xe000-0xe00f at device 1.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xd800-0xd81f irq 12 at device 1.2 on pci0 usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered chip1: <Intel 82371AB Power management controller> port 0xe800-0xe80f at device 1.3 on pci0 rl0: <Accton MPX 5030/5038 10/100BaseTX> port 0xd400-0xd4ff mem 0xe5000000-0xe50000ff irq 10 at device 10.0 on pci0 rl0: Ethernet address: 00:e0:29:83:38:37 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto vr0: <VIA VT3043 Rhine I 10/100BaseTX> port 0xd000-0xd07f mem 0xe4800000-0xe480007f irq 11 at device 11.0 on pci0 vr0: Ethernet address: 00:60:67:44:83:d0 miibus1: <MII bus> on vr0 amphy0: <DM9101 10/100 media interface> on miibus1 amphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pci0: <Cirrus Logic GD5446 SVGA controller> at 12.0 isa0: too many dependant configs (8) isa0: unexpected small tag 14 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x100> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A, console sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ad0: 4892MB <QUANTUM FIREBALL EL5.1A> [10602/15/63] at ata0-master UDMA33 Mounting root from ufs:/dev/ad0s1a looutput: af=0 unexpected looutput: af=0 unexpected looutput: af=0 unexpected looutput: af=0 unexpected fd0c: hard error writing fsbn 64 (No status) fd0c: hard error writing fsbn 64 (No status) fd0c: hard error writing fsbn 64 (No status) fd0c: hard error writing fsbn 64 (No status) fd0c: hard error writing fsbn 64 (No status) fd0c: hard error writing fsbn 64 (No status) fd0c: hard error writing fsbn 64 (No status) fd0c: hard error writing fsbn 64 (No status) fd0c: hard error writing fsbn 64 (No status) fd0c: hard error writing fsbn 64 (No status) fd0c: hard error writing fsbn 64 (No status) fd0c: hard error writing fsbn 64 (No status) fd0c: hard error writing fsbn 64 (No status) fd0c: hard error writing fsbn 64 (No status) fd0c: hard error writing fsbn 64 (No status) fd0c: hard error writing fsbn 64 (No status) fd0c: hard error writing fsbn 64 (ST0 40<abnrml> ST1 2<write_protect> ST2 0 cyl 1 hd 1 sec 11) fd0c: hard error writing fsbn 64 (ST0 40<abnrml> ST1 2<write_protect> ST2 0 cyl 1 hd 1 sec 11) fd0c: hard error writing fsbn 16 of 16-18 (ST0 40<abnrml> ST1 2<write_protect> ST2 0 cyl 0 hd 0 sec 17) fd0c: hard error writing fsbn 56 of 56-63 (ST0 40<abnrml> ST1 2<write_protect> ST2 0 cyl 1 hd 1 sec 3) fd0c: hard error writing fsbn 16 of 16-18 (ST0 40<abnrml> ST1 2<write_protect> ST2 0 cyl 0 hd 0 sec 17) fd0c: hard error writing fsbn 56 of 56-63 (ST0 40<abnrml> ST1 2<write_protect> ST2 0 cyl 1 hd 1 sec 3) fd0c: hard error writing fsbn 64 (ST0 40<abnrml> ST1 2<write_protect> ST2 0 cyl 1 hd 1 sec 11) fd0c: hard error writing fsbn 16 of 16-18 (ST0 40<abnrml> ST1 2<write_protect> ST2 0 cyl 0 hd 0 sec 17) fd0c: hard error writing fsbn 56 of 56-63 (ST0 40<abnrml> ST1 2<write_protect> ST2 0 cyl 1 hd 1 sec 3) fd0c: hard error writing fsbn 64 (ST0 40<abnrml> ST1 2<write_protect> ST2 0 cyl 1 hd 1 sec 11) fd0c: hard error writing fsbn 16 of 16-18 (ST0 40<abnrml> ST1 2<write_protect> ST2 0 cyl 0 hd 0 sec 17) fd0c: hard error writing fsbn 56 of 56-63 (ST0 40<abnrml> ST1 2<write_protect> ST2 0 cyl 1 hd 1 sec 3) fd0c: hard error writing fsbn 64 (ST0 40<abnrml> ST1 2<write_protect> ST2 0 cyl 1 hd 1 sec 11) fd0c: hard error writing fsbn 16 of 16-18 (ST0 40<abnrml> ST1 2<write_protect> ST2 0 cyl 0 hd 0 sec 17) fd0c: hard error writing fsbn 56 of 56-63 (ST0 40<abnrml> ST1 2<write_protect> ST2 0 cyl 1 hd 1 sec 3) fd0c: hard error writing fsbn 64 (ST0 40<abnrml> ST1 2<write_protect> ST2 0 cyl 1 hd 1 sec 11) fd0c: hard error writing fsbn 16 of 16-18 (ST0 40<abnrml> ST1 2<write_protect> ST2 0 cyl 0 hd 0 sec 17) lp0: IPv6 not supported To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200106212054.f5LKsfe10296>