Date: Fri, 17 Feb 2006 20:44:24 -0500 From: Mike Tancsa <mike@sentex.net> To: Doug Ambrisko <ambrisko@freebsd.org> Cc: cvs-all@freebsd.org Subject: Re: cvs commit: src/sys/dev/ichwd ichwd.c ichwd.h Message-ID: <v1ucv1pfno2nbb1q7ae17gp7ennp1amalt@4ax.com> In-Reply-To: <200602171846.k1HIkIIf047503@repoman.freebsd.org> References: <200602171846.k1HIkIIf047503@repoman.freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, 17 Feb 2006 18:46:18 +0000 (UTC), in sentex.lists.freebsd.cvs you wrote: >ambrisko 2006-02-17 18:46:18 UTC > > FreeBSD src repository > > Modified files: > sys/dev/ichwd ichwd.c ichwd.h=20 > Log: > Re-work the bus attachment somewhat. Make the rids unique for > the SMI/TCO address space. Switch the bus space I/O to the > one specific for either the SMI or TCO space. Re-calibrate > the tick. Add some more device id's, 82801FBR submitted by des. > This makes it work on the platforms I've tested with. Hi, Any chance to MFC this to RELENG_6 ? It compiles cleanly as well as fixes http://www.freebsd.org/cgi/query-pr.cgi?pr=3Dkern/79698 It still does not work against a 915 board I have, but then again I think it might be the board as LINUX's wdt doesnt work on it either ichwd0: <Intel 82801FB/FR watchdog timer> on isa0 ppc0: parallel port not found. Perhaps because the ppc is disabled ? I know on the Winbond W83697UF/UG WDT (http://www.tancsa.com/watchdog/) the board must have a number of seemingly unrelated devices enabled for it to work. ---Mike -------------------------------------------------------- Mike Tancsa, Sentex communications http://www.sentex.net Providing Internet Access since 1994 mike@sentex.net, (http://www.tancsa.com)
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?v1ucv1pfno2nbb1q7ae17gp7ennp1amalt>