Date: Sat, 28 Aug 2010 09:50:35 +0200 From: Hans Petter Selasky <hselasky@c2i.net> To: freebsd-usb@freebsd.org Cc: Matthew Luckie <mjl@luckie.org.nz> Subject: Re: ZTE USB 3g stick Message-ID: <201008280950.35903.hselasky@c2i.net> In-Reply-To: <4C789A4E.9030409@luckie.org.nz> References: <4C789A4E.9030409@luckie.org.nz>
next in thread | previous in thread | raw e-mail | index | archive | help
On Saturday 28 August 2010 07:10:38 Matthew Luckie wrote: > Hi > > I've got a 3g usb stick that works fine with 8.0-STABLE from Jan 3rd > 2010, but does not with 8.1-RELEASE. Its a Vodafone branded stick > bought in New Zealand. > > With FreeBSD 8.0 it prints this when I insert the stick: > > usb_test_autoinstall: Eject CD command status: USB_ERR_PENDING_REQUESTS > ugen6.2: <ZTE,Incorporated> at usbus6 > ugen6.2: <ZTE,Incorporated> at usbus6 (disconnected) > ugen6.2: <ZTE,Incorporated> at usbus6 > u3g0: <ZTE,Incorporated ZTE CDMA Technologies MSM, class 0/0, rev > 2.00/0.00, addr 2> on usbus6 > u3g0: Found 5 ports. > umass0: <ZTE,Incorporated ZTE CDMA Technologies MSM, class 0/0, rev > 2.00/0.00, addr 2> on usbus6 > umass0: SCSI over Bulk-Only; quirks = 0x0000 > umass0:2:0:-1: Attached to scbus2 > (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 > (probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (probe0:umass-sim0:0:0:0): SCSI Status: Check Condition > (probe0:umass-sim0:0:0:0): NOT READY asc:3a,0 > (probe0:umass-sim0:0:0:0): Medium not present > (probe0:umass-sim0:0:0:0): Unretryable error > da0 at umass-sim0 bus 0 scbus2 target 0 lun 0 > da0: <ZTE MMC Storage 2.31> Removable Direct Access SCSI-2 device > da0: 40.000MB/s transfers > da0: Attempt to query device size failed: NOT READY, Medium not present > > [mjl@mylar mjl]$ sudo usbconfig -u 6 dump_info > ugen6.1: <EHCI root HUB Intel> at usbus6, cfg=0 md=HOST spd=HIGH > (480Mbps) pwr=ON > > ugen6.2: <ZTE CDMA Technologies MSM ZTE,Incorporated> at usbus6, cfg=0 > md=HOST spd=HIGH (480Mbps) pwr=ON > > On FreeBSD 8.1 it prints this: > > ugen6.2: <ZTE,Incorporated> at usbus6 > > (and nothing else) > > [mjl@mylar mjl]$ sudo usbconfig -d 6.2 dump_device_desc > ugen6.2: <ZTE CDMA Technologies MSM ZTE,Incorporated> at usbus6, cfg=255 > md=HOST spd=HIGH (480Mbps) pwr=ON > > bLength = 0x0012 > bDescriptorType = 0x0001 > bcdUSB = 0x0200 > bDeviceClass = 0x0000 > bDeviceSubClass = 0x0000 > bDeviceProtocol = 0x0000 > bMaxPacketSize0 = 0x0040 > idVendor = 0x19d2 > idProduct = 0x2000 > bcdDevice = 0x0000 > iManufacturer = 0x0002 <ZTE,Incorporated> > iProduct = 0x0001 <ZTE CDMA Technologies MSM> > iSerialNumber = 0x0003 <P673A2VDF_MS> > bNumConfigurations = 0x0001 Have you loaded the u3g driver before plugging the device. Also try: usbconfig -d 6.2 set_config 0 --HPS
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201008280950.35903.hselasky>